Bedienungsanleitung Thomson RCD300U (Seite 9 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

627900

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

PLAY/PAUSE button (9)

 When music is stopped, press the button to play the music.

 When music is playing, press the button to pause.

 When music is paused, press the button to resume play.

STOP button (10)

 When music is playing or paused, press the button to stop.

 When in programming tracks, press the button to exit the mode.

SKIP UP/NEXT button (8)

 When music is stopped, press the button to select the track you want to play (and go to the first track if

currently on the last track).

 When music is playing, press the button to skip to the next track (and go to the first track if currently playing

the last track).

 Press the button and hold for 2 seconds to fast-forward.

 When playing programmed tracks, press the button to skip to the next programmed track (and go to the first

track if currently playing the last track).

SKIP DOWN/BACK button (7)

 When music is stopped, press the button to select the track you want to play (and go to the last track if

currently on the first track).

 When music is playing, press the button to skip to the previous track (and go to the last track if currently

playing the first track).

 Press the button and hold for 2 seconds to rewind.

 When playing programmed tracks, press the button to skip to the previous programmed track (and go to the

last track if currently playing the first track).

CD PLAY REPEAT

• You can choose between two modes: Repeat 1 and Repeat

ll.

• During Repeat 1 mode, the player repeats the current CD track.

• During Repeat All mode, the player repeats all tracks on the CD; when it reaches end of the last track, it will

return to the first track.

PROGRAMMING CD & USB PLAY

You can only enter programs in STOP mode. Press the STOP button (10) and then follow the instructions

below.

1. Press the MODE/CLOCK SET button (13); “Memory” is displayed and the track number flashes.

2. Press the SKIP DOWN/BACK / SKIP UP/NEXT buttons (7, 8) to choose the track number you wish

to program.

3. Press the MODE/CLOCK SET button again to confirm. The unit saves the track number and goes to the next

track you wish to program.

4. The unit can store 20 CD programs and 99 USB programs. After it has stored the maximum number of

programs, no further entry is possible.

5. If you press the STOP button (10) while programming the unit, the unit clears the programmed content

and returns to STOP mode.

6. If you press the PLAY/PAUSE button (9) when the unit has been programmed, “Memory” is displayed

and the unit starts playing the programmed tracks.

7. If you press the SKIP DOWN/BACK / SKIP UP/NEXT buttons when playing programmed tracks,

the unit skips to the previous or next programmed track.

8. If you press the STOP button when playing programmed tracks, the unit stops playing but programmed

track selection is kept. Press the

STOP button again to clear the programmed content and return to STOP

mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson RCD300U Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info