Bedienungsanleitung Thomson ROC1407 (Seite 2 von 2) (Englisch)

607825

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

The NAVILIGHT system

The THOMSON NAVILIGHT system allows you easy

access to the settings of your television (TV) including this

feature.

1. Switch on the set you want to control.

2. Press key MENU once.

3. Navigate through the setting menus with the keys up,

down, left, right (", $, !, #).

4. Validate with OK.

5. To leave the menus, press key EXIT once.

How to retrieve

a programmed code

Method D - Automatic

code search

With this method, the remote control scrolls through the

full code list by sending an IR signal to the set to be

controlled remotely. Proceed as follows:

1. Check that your equipment is on. If not, switch it on

manually.

2. Hold down the SETUP key until the red indicator

light blinks and then remains lit (the indicator light

remains on for a few seconds to give you the time

to proceed with the following steps. The indicator

lamp flashes to signal that this time is almost up,

and

then

goes

f).

3. Release the SETUP key.

4. Press the PROG+ or standby

key. After a few

seconds, the remote control begins to scroll through

the whole code list included in the library (at a rate

of roughly 1 code per second). Press the PROG+

key once again to slow down the test speed (1 code

every 3 seconds). As soon as the set changes

channels, you must press OK to save the code and

stop the remote control scrolling through the list. If

you do not react quickly enough, you can go back

to the previous code by pressing PROG- as many

times as necessary (you can go forward by

pressing

, PROG+ if you have gone back too

far). As soon as the set responds again, press OK

to save the code.

It may be useful to retrieve the code programmed in the

remote control.

1. Hold down the SETUP key until the red indicator

light blinks and then remains lit.

2. Press the SETUP key again briefly, the indicator

light blinks once.

3. Press the number keys in decreasing order (9 to 0)

until you notice that the indicator lamp blinks once.

4. The number which made the indicator lamp blink is

the first of the four figures comprising your code,

write it down. Repeat to obtain the other two codes.

5. Repeat step 3 to find out the two other numbers of

the code.

6. When the fourth figure is found, the indicator lamp

goes out.

Check of

the programming

Turn on the set and press, for example, 2 to change

channels.

Try other remote control keys to find out the range of

functions you can control. If you think that not all of the

keys are active, try the programming Method B or C.

When you have retrieved the code of your

set, jot it down so that you can use it

whenever needed.

After battery replacement, you’ll have to

programme the remote control again.

ROC1407 / GB - bj - XX / aws - rst / 01-2007

TV CODE

This

symbol

means

that

your

inoperative

electronic appliance must be collected

separately and not mixed with the

household waste • The European Union

has implemented a specific collection and

recycling system for which producers are responsible

• This appliance has been designed and manufactured

with high quality materials and components that can be

recycled and reused • Electrical and electronic

appliances are liable to contain parts that are

necessary in order for the system to work properly but

which can become a health and environmental hazard

if they are not handled or disposed of in the proper

way • Consequently, please do not throw out your

inoperative appliance with the household waste • If you

are the owner of the appliance, you must deposit it at

the appropriate local collection point or leave it with the

vendor when buying a new appliance • If you are a

professional user, please follow your supplier’s

instructions • If the appliance is rented to you or left in

your care, please contact your service provider • Help

us protect the environment in which we live !

Yo u can contact THOMSON by dialling:

0871 500 0520

(call to this number

will be charged at 10 pence per minute)

http://www.thomsonlink.com

MAJ_29/11/2006

F01_GB_ROC1407 2/02/07 16:24 Page 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson ROC1407 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Thomson ROC1407

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info