Bedienungsanleitung Thomson ROC2406B (Seite 1 von 3) (Englisch)

607827

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

This universal remote control (2 in 1) is compatible with the majority of television sets, video

cassette recorders, DVD players and satellite recievers as well as DVBT sets (Digital Video

Broadcast Terrestrial) controlled by infra-red commands.

This remote control was programmed in the factory, so that you can use it to control most

of the sets of the THOMSON group’s make. For this reason, we recommend that prior to

attempting to programme the remote control, you try it out by means of one of the methods

described in this user manual. However, first of all, you must install 2 batteries (AAA) in the

remote control.

Please keep this guide along with the code list (provided separately), so that you can

subsequently programme your remote control for use with other sets.

1 On/Standby or Standby only, depending on the

equipment being used.

2 Mode keys. Select the device to control (TV, VCR, …).

3 Activation and use of teletext (Videotext).

4 Selection of channels, input of digital values,

channels with 2 digits, external TV/VIDEO sources

(AV connectors).

5 Zapping and commands or the muting of sound.

6 Programming of the remote control.

7 Activation and use of menus (display, deletion,

choice, confirmation).

8 Use of teletext (Fastext) or functions specific to

certain devices.

9 Operating a video cassette recorder (VCR) or a

DVD player (DVD).

Note: depending on the actual devices, manufacturers

and year of manufacture, the functions available

will vary.

DVBT (Digital Video Broadcast Terrestrial): for those

countries concerned, you can control a DVBT set by

programming separate codes by using the VCR/DVD

mode key.

The keys

Testing the remote control

before programming

Programming

the remote control

1. Switch on the set you want to control.

2. Press the key that corresponds to the type of

equipment you want to control:

TV: television set,

VCR/DVD: video recorder - DVD player.

3. Direct the remote control towards the TV set and

try to switch it off by simply pressing the key

. If

the device does not turn off, you must program the

remote control using one of the methods A, B, C

or D described hereafter.

Note 1: The VCR/DVD mode key can be

programmed to control another device other

than indicated on the key. It is therefore

possible, for example, to allocate your

Satellite mode to the VCR/DVD mode key.

You must enter the code corresponding to

the manufacturer and the device by using

one of the methods indicated in this manual.

However, method D (automatic search for

a code) will greatly simplify the task for

you. In this case it is only necessary to

enter a code from the list that corresponds

to the type of device (for example: 0603

for a Thomson satellite receiver) and then

to run the automatic search procedure. The

remote control will then test all the codes

automatically until it finds those that control

the receiver.

Note 2: To control 2 devices of the same type and the

same brand (2 Thomson VCRs, 2 Thomson satellite

receivers, ...) ensure first that these two devices are

not set to react to the same sub code, they will require

one sub code for one and a different sub code for

the other (i.e., codes A and B with Thomson devices).

Once you have checked this, successively program 2

separate mode keys using method D.

Method A – Fast programming

with 1-digit subcode

Method B – 4-digit codes

programming

Before you start programming, you must find the

subcode of the set to be controlled.

Refer to the list provided with these instructions, page

I of the subcodes.

1. Switch on the set you want to control.

2. Hold down the S key until the key that corresponds

to the last mode you selected blinks and then

remains lit (the indicator light remains on for a

few seconds to give you the time to proceed with

the following steps. The indicator lamp flashes to

signal that this time is almost up, and then goes

off).

3. Press the key that corresponds to the type of

equipment you want to control:

TV: television set,

VCR/DVD: video recorder - DVD player.

4. While the indicator is lit, type in the subcode

(example: 1 for THOMSON).

5. Direct the remote control towards the set and try

to switch it off by pressing the key

6. If the set you want to control switches off, press

OK to memorise the subcode.

Note: If during step 3 you pressed the VCR/DVD key,

with identical sub-codes being used to control a VCR or

DVD player, pressing the

key will turn off the type of

device you have chosen to control.

7. Should the set not switch off, press key

repeatedly, until the set switches off. Between

two key presses, leave enough time for the key

corresponding to the selected mode enough time

to light up again (about 1 second). Proceeding

this way will enable you to see whether the set

responds or not.

8. Immediately upon the switching-off of the set to be

controlled, press OK to store the subcode.

Check of the programming:

In principle, your set is ready for receiving the remote

control commands.

Check your remote control for proper functioning by

performing the test described on page 2.

Before you start programming, you must find the code

of the set to be controlled.

Refer to the list provided with these instructions, page

II of the codes.

1. Switch on the set you want to control.

2. Hold down the S key until the key that corresponds

to the last mode you selected blinks and then

remains lit (the indicator light remains on for a

few seconds to give you the time to proceed with

the following steps. The indicator lamp flashes to

signal that this time is almost up, and then goes

off).

3. Press the key that corresponds to the type of

equipment you want to control:

TV: television set,

VCR/DVD: video recorder - DVD player.

4. While the indicator is lit, enter the first digit

of the 4-digit code proposed for the set to be

controlled (example: 0036 for Thomson).

5. Direct the remote control towards the set and try

to switch it off by pressing the key

01_GB_Roc2406B.indd 1 20/12/06 10:15:26

Thomson ROC2406B Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Thomson ROC2406B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info