Bedienungsanleitung Thomson ROC4218 4in1 (Seite 8 von 54) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

607846

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Other functions

Placing all devices on standby

Press the G key twice in less than one second, keeping

it held down the second time. All the devices go on

standby one after the other (the devices which were

already on Standby may turn on).

Adjustment of ALL volume controls under a

speciﬁ c mode

In its delivered state, the ROC 4218 is programmed

such that all modes will use their own Volume and

Mute functions if present.

You can allocate the volume control to one of the

modes of the remote control on condition that the

volume control exists on the corresponding device (e.g.

control of TV sound in TV mode, or DVD, …).

1. Hold the SETUP key down until the key

corresponding to the last selected mode blinks and

then remains lit.

2. Release the SETUP key

3. Press the H key until the mode key blinks once.

4. Press once on the mode key (TV, DVD, …)

corresponding to the device whose volume will

always be controlled by the VOL and H keys.

5. Press the H key once. The mode key goes off.

6. All other mode will now punch-through to your

chosen mode for Volume and Mute control.

Adjustment of the volume controls for EACH

mode.

You can decide that the volume control is functional

for each mode selected on condition that the volume

control exists on the corresponding device (e.g. control

of the television set sound in TV mode, the control of

the sound of the SAT receiver in STB mode, …).

1. Hold the SETUP key down until the key

corresponding to the last selected mode blinks and

then remains lit.

2. Release the SETUP key

3. Press the H key until the mode key blinks once.

4. Press once on the mode key (TV, DVD, …)

corresponding to the device whose volume will

always be controlled by the VOL and H keys.

5. Press the VOL- key once.

6. Press the H key once.

7. The chosen mode key will now use its own Volume

and Mute functions

Restoring the universal Volume/Mute

functions

If you have changed the universal volume and mute

functions, as described in the previous two sections,

you can reset the functions back to the factory settings:

1. Hold the SETUP key down until the key

corresponding to the last selected mode blinks and

then remains lit.

2. Release the SETUP key

3. Press the H key until the mode key blinks once.

4. Press and release the H key. The mode key light

will go out completely. The volume and mute

functions are now restored to their factory defaults.

Replacing the batteries

Use 2 CR2032 Lithium batteries

1. Open the cover on the back of the remote control.

2. Remove the old batteries.

2. Check the +/– polarity on the batteries and inside

the compartment.

3. Insert the batteries.

4. Close the cover.

When exchanging the batteries, it may be necessary to

reprogram the unit. Hence it is advisable to record the

codes needed for your devices.

Used batteries do not qualify as household waste. The

batteries must be disposed of at a special collection

point for used batteries.

Note on environmental protection:

After the implementation of the European

Directive 2002/96/EU in the national le-

gal system, the following applies:

Electrical and electronic devices may not

be disposed of with domestic waste.

Consumers are obliged by law to return electrical and

electronic devices at the end of their service lives to the

public collecting points set up for this purpose or point

of sale. Details to this are deﬁ ned by the national law

of the respective country. This symbol on the product,

the instruction manual or the package indicates that a

product is subject to these regulations. By recycling,

reusing the materials or other forms of utilising old

devices, you are making an important contribution to

protecting our environment.

00131793bda.indd Abs1:3

131793bda.indd Abs1:3

19.08.2008 16:01:27 Uhr

19.08.2008 16:01:27 Uh

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson ROC4218 4in1 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info