Bedienungsanleitung Thomson Speedtouch ST608 (Seite 178 von 208) (Englisch)

548800

178

Zoom out

Zoom in

Vorherige Seite

1/208

Nächste Seite

168

E-DOC-CTC-20051017-0151 v1.0

Chapter 5

Expert Configuration

WPA WPA is the highest form of security available but make sure that your wireless client

and client manager are compatible with it. If you want to use this level of encryption

you must have a RADIUS (Remote Authentication Dial-in User Service) server

installed on your network.

To enable level2 - WPA:

1 Select Security Level 2 - WPA.

2 Enter the RADIUS settings provided by your network administrator in the

appropriate fields.

3 Click Apply to immediately apply your changes.

Access Control Wireless client access control allows to authorize or explicitly inhibit access

between specific wireless clients and the SpeedTouch™ wireless access point

based on the wireless client's MAC address.

The Access Control tab allows you to manage the SpeedTouch™ Access Control

List (ACL).

By default New stations allowed automatically is selected. Any client with the

correct wireless settings (Network Name and, if required, Network key) will be

automatically associated to the SpeedTouch™ and will be allowed to send/receive

data via the SpeedTouch™ wireless access point. In case New wireless client

allowed is not selected, you must manually add the wireless clients and their

authorization to the access control list.

You can use the Association / Registration button to allow wireless clients to enter

the access control list. This button can be found on the back panel of the

SpeedTouch™, or on the Access Control tab. Pressing this button triggers the

SpeedTouch™ to unlock the access control list for a time frame of one minute, after

which the access control list is locked again. Any wireless clients trying to associate

with the SpeedTouch™ having the correct wireless settings (Network Name and, if

required, Network key) will be added to the table.

Per wireless client present in the access control list, the following information is

provided and can be re-configured:

 An intuitive name for the wireless client

 Whether the wireless client is allowed (select yes) or not (select no) to

exchange data between the wireless clients and the SpeedTouch™.

Regardless of whether registration of wireless clients is controlled via the

Association / Registration button or not, you can always manually add/delete clients

to/from the access control list or define wireless clients that are specifically allowed

(select yes) or not allowed (select no) to access the SpeedTouch™ wireless network.

To delete all wireless clients from the access control list, click Flush. Be aware that if

you are connected wirelessly to the SpeedTouch™, you will lose your connection.

Associated stations The Associated Stations tab allows you to overview the currently associated

clients.

To add an associated station to the access control list:

1 Select the entry you want to explicitly add to the ACL. Associated stations that

are not present in the ACL yet, are identified by the name Not Registered

(ACL).

2 To change the access rights for this station, click Access Control.

3 Change the name of the station (optional but recommended).

4 In the Allowed list, click:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson Speedtouch ST608 Seite 178

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Thomson Speedtouch ST608

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info