548805
15
Zoom out
Zoom in
Vorherige Seite
1/316
Nächste Seite
ST2030s VoIP Business Phone
ST2030s SIP Administrator Guide v3.0 Page 7 of 308
Network Time Protocol (NTP)
NTP is an Internet standard protocol that assures accurate synchronization to the
millisecond of computer clock times in a network of computers. NTP sends periodic time
requests to servers, obtaining server time stamps and using them to adjust the client's
clock.
Simple Network Management Protocol (SNMP)
SNMP is a set of protocols for managing complex networks. It works by sending
messages, called protocol data units (PDUs), to different parts of a network. SNMP-
compliant devices, called agents, store data about themselves in Management Information
Bases (MIBs) and return this data to the SNMP requesters.
Address Resolution Protocol (ARP)
ARP is a network layer protocol used to convert an IP address into a physical address
(called a DLC address), such as an Ethernet address. A host wishing to obtain a physical
address broadcasts an ARP request onto the TCP/IP network. The host on the network
that has the IP address in the request then replies with its physical hardware address
Transmission Control Protocol (TCP)
TCP is one of the main protocols in TCP/IP networks. Whereas the IP protocol deals only
with packets, TCP enables two hosts to establish a connection and exchange streams of
data. TCP guarantees delivery of data and also guarantees that packets will be delivered
in the same order in which they were sent.
Session Description Protocol (SDP)
SDP is a protocol that defines a text-based format for describing streaming media
sessions and multicast transmissions. SDP is not a transport protocol but a method of
describing the details of the transmission. For example, a SDP file contains information
about the format, timing and authorship of the transmission, name and purpose of the
session, any media, protocols or codec formats, the version number, contact information
and broadcast times.
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Thomson ST2030 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Thomson ST2030

Thomson ST2030 Kurzanleitung - Deutsch, Holländisch - 8 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info