Bedienungsanleitung Thomson THS 812 (Seite 23 von 27) (Englisch)

480544

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

P18

TROUBLESHOOTING

7.5.2 Set Timer

Timers can be used to schedule recordings or to switch to a certain channel at a desired

moment. It will help you not to miss your favourite events. Above the settings you will see the

current date and timer displayed.

Timer Number: Use

t/u to select one of the ten available timers or press OK to list up.

Channel: With OK you can list up the channel list in a new screen. Use

p/q or

PG+/- to select a channel and press OK again to apply this channel.

Timer Type: Choose between Once, Daily or Weekly.

Event Type: Set ﬁxed to Turn ON.

Enable: Choose between Yes or No. You have to choose Yes if you want the timer

to start at the desired time.

Month: Only available when Timer Type is Once. Use

t/u to select the month.

Date: Only available when Timer Type is Once. Use

t/u to select the date.

Day: Only available when Timer Type is Weekly. Use

t/u to select the day.

Time: Use the 0~9 buttons to enter the time at which the timer should start.

Duration: Use the 0~9 buttons to digit the duration of the timer. For duration of 45

min, just enter 45 and press OK or for 1h 30min, just enter 130 and press

OK.

By pressing the YELLOW Summary button you can check the set timers and use the BLUE

button to delete a timer. With YELLOW or EXIT/SORTIE you can close this menu again.

Timers set Enable to Yes are automatically available in the Summary.

Once all settings are made, press EXIT/SORTIE to leave the menu. When returning to viewing

mode the receiver will inform with a message that it saves your settings.

NOTE: In case one timer is in conﬂict with another or if the set time has already passed, the receiver

will display a warning and ask how to solve the conﬂict.

8.0 TROUBLESHOOTING

There may be various reasons for abnormal operation of the receiver. Please check the receiver

according to the procedures shown below. If the receiver does not work properly after checking

it, please contact your local Serviceline or THOMSON dealer. Alternatively you can send a

support mail via our website: www.thomsonstb.net. NEVER open or disassemble your receiver.

This may cause a dangerous situation and will void the warranty.

Symptom Cause Remedy

The display on

front panel does

not light up.

The power adapter is not

plugged in or power switch

OFF.

Check that the power adapter is plugged

in to the wall outlet. Make sure power

switch on rear panel is in ON position.

No picture or

sound

Wrong connection or setting

of the Audio/Video output of

the receiver to TV.

Connect the Audio/Video output of the

receiver to TV correctly and check the

adjusted settings in the menu Installation

– System Settings.

Audio muting. Press the MUTE button on TV or receiver.

Wrong resolution. Press the resolution button on your receiver

RCU.

TV power off. Turn TV on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson THS 812 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info