Bedienungsanleitung Thomson THS813 (Seite 20 von 30) (Englisch)

658794

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

P20

7. MAIN MENU

NOTE: If you are using another Parental Lock function than Unblocked, all FTA channels which support

EPG or submit EPG based parental rate will require entering of your PIN code DEFAULT PIN: 0000.

7.1.5 Factory Reset

A factory reset will restore your receiver to the factory default settings. It will delete all settings and channels. To

reset the receiver, you have to enter your PIN code DEFAULT PIN: 0000, then use pq to select OK to execute

or Cancel to return to the menu. Afterwards the receiver will restart with the First Time Installation.

WARNING: A factory reset will permanently delete all your personal settings, timers and stored channels.

Please consider this before you perform a factory reset. If you want to backup your settings before

performing a factory reset, please refer to chapter 7.2.2 Backup to USB device!

7.2 Update & Info

This menu allows you to check information about your current software, create a backup of your channels, load

a backup into the receiver and update the receiver via USB or OTA (download via satellite). It consists of the

following sub-menus: Receiver Information, Backup to USB device, Load Backup from USB device, USB Update and

OTA Software Update. Choose a sub menu with pq and press OK to advance. For Backup to USB device and

Load Backup from USB device these functions will be executed by pressing OK directly.

7.2.1 Receiver Information

In this submenu you can find information about the software and hardware version of your receiver. A customer

support agent might ask for the information given in this screen. Press

to return to the menu.

7.2.2 Backup to USB device

In the Update & Info menu select Backup to USB device with pq and press OK to execute a current backup of

your channels, transponders and user settings. When the message Please wait... disappears the receiver has

successfully created the “userdata.bin” file to the root directory of your USB device which you can save if you

need to reset the receiver and easily want to load this backup into the receiver.

7.2.3 Load Backup from USB device

In the Update & Info menu select Load Backup from USB device with pq and press OK to execute loading the

“userdata.bin” file into the receiver. You will only be able to load this kind of file into the receiver so please don’t

rename it, or alternatively rename it again to the above mentioned file name before you load the file to the

receiver again.

7.2.4 USB Update

This function allows you to perform a software update with a USB storage device.

Download the software and update instructions from our website www.thomsonstb.net and unzip it on your

PC. Then load the file to the root directory of your correctly formatted USB storage device and connect it to your

receiver. Turn on the receiver and wait until the USB device is successfully detected.

Press OK in the menu USB Update and confirm the displayed message, then wait until the software update and

loading process begins. After the loading process has been started successfully (a progress banner is displayed)

you can disconnect the USB storage device (or wait until the update is fully loaded)! Please disconnect the USB

device after a successful update in order to restart the receiver!

WARNING: NEVER disconnect the receiver from the mains or switch the power OFF during the update

procedure. It can damage your receiver and warranty will void! In case of an USB software update

please consider that the receiver may delete all channels, data and user settings in certain cases.

You can backup your data at any time, see chapter 7.2.2 Backup to USB device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson THS813 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info