Bedienungsanleitung Thomson THS813 (Seite 26 von 30) (Englisch)

658794

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

P26

TROUBLESHOOTING

NOTE: 5 min after switching the receiver to standby it enters the deep sleep mode. In this time the receiver is

able to start up quickly. Starting up from deep sleep takes approx. 1 min.

7.5.2 Set Timer

Timers can be used to schedule recordings or to switch to a certain channel at a specific time. It will help you

not to miss your favourite events. Above the settings you will see the current date and timer displayed.

Timer Number Use tu to select one of the ten available timers or press OK to list up.

Channel With OK you can list the channel list in a new screen. Use pq or P+/P to select a

channel and press OK again to apply this channel.

Timer Type: Choose between Once, Daily or Weekly.

Event Type: Choose between Record or Turn ON.

Month: Only available when Timer Type is Once. Use tu to select the month.

Date: Only available when Timer Type is Once. Use tu to select the date.

Day: Only available when Timer Type is Weekly. Use tu to select the day.

Time: Use the 0~9 buttons to enter the time at which the timer should start.

Duration: Use the 0~9 buttons to digit the duration of the timer. For duration of 45 min, just

enter 45 and press OK or for 1h 30min, just enter 130 and press OK.

Enable: Choose between Yes or No. You have to choose Yes if you want the timer to start at the

set time.

By pressing the YELLOW Summary button you can check the set timers. Press the RED button to edit a set timer.

Then you can choose between Record and Turn ON by using the tu buttons. Enter the time with the 0 ~ 9

buttons if you want to change it. Select OK to change the timer or Cancel to cancel it. The BLUE button can be

used to delete a timer and with the YELLOW button or

you can close this menu again. Timers set Enable to

Yes are automatically available in the Summary. When all settings have been made, press to leave the menu.

When returning to viewing mode the receiver will inform with a message that it saves your settings.

NOTE: If one timer is in conflict with another or if the set time already has passed, the receiver will display a

warning and ask how to solve the conflict.

8.0 TROUBLESHOOTING

There may be various reasons for abnormal operation of the receiver. Please check the receiver according to

the procedures shown below. If the receiver does not work properly after checking it, please contact your local

service line or THOMSON dealer. Alternatively you can send a support mail via our website:

www.thomsonstb.net. NEVER open or disassemble your receiver. This may cause a dangerous situation and will

void the warranty.

Symptom Cause Remedy

The status LED on

the front panel

does not light up.

The power adapter is not plugged

in or the power is switched OFF.

Check that the power adapter is plugged

into the wall outlet. Make sure that the power

switch on the rear panel is in ON position.

No picture

No sound

No menu

Wrong input selected/ bad

connection or cable. Connectors

are not fully inserted.

Check that the correct TV input is selected.

HDMI inputs for most TV screens are not

automatically switched to the correct HDMI

input.

Make sure the connectors are properly

connected to the TV and receiver.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson THS813 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info