480547
9
Zoom out
Zoom in
Vorherige Seite
1/25
Nächste Seite
P6
CONNECTION
3.2 Connecting to TV with HDMI cable
Fig. 4
The TV set shall be connected with the receiver using a good quality HDMI 1.3 or
higher cable. This connection gives the highest possible quality.
3.3 Connecting to TV with SCART cable
Fig. 4
THT501 is also equipped with a SCART connector; alternatively, the TV set can be
connected to the receiver using a good quality SCART cable.
3.4 Connecting to TV with Cinch cable
Fig. 4
TV sets without SCART or HDMI input(s) can be connected to the receiver using
suitable cinch cables. Connect one end of the cable to the Audio L, R and VIDEO
connectors on the back of THT501. Connect the other end to the respective inputs
on your TV set.
3.5 Connecting to a Digital Audio Amplifier with S/PDIF
Fig. 5
By connecting your receiver to a digital amplifier or home theatre system, you can
enjoy the best possible sound quality and multi-channel audio (depending on
broadcast). Connect your Digital Audio Amplifier or home theatre system with a
suitable cinch cable to the S/PDIF connector on the back of the receiver.
3.6 Connecting to a Digital Audio Amplifier and TV using HDMI
Fig. 6
By connecting your receiver to the latest digital amplifiers or home theatre systems
with HDMI connections, you will enjoy the best possible sound quality and multi-
channel audio (depending on broadcast). Connect the HDMI output of the receiver
to an input of your amplifier, and then connect the HDMI output of the amplifier
to your TV set. Select the correct input on your amplifier to watch and listen
to programmes.
3.7 Connecting a USB storage device
Fig. 7
NOTE: We recommend the use of a hard disk drive USB 2.0 or higher for
recording and play back of TV events.
For proper functioning of Time Shift and recording functions, a fast USB device
(such as a hard disk drive) is needed. Interrupted playback or a distorted picture
during playback or Time Shift are indications for a low device speed. THOMSON
cannot guarantee proper functioning of recoding and or Time Shift functions with all
USB devices.
3.8 Connecting and using an infrared sensor
Fig. 7
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Thomson THT501 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info