658783
23
Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
19
English
The upgrade menu will now be displayed.
Use pq to select Upgrade Mode and choose option Allcode.
Use pq to select Upgrade File and choose the le containing the latest and correct software.
When all settings have been made, move the highlight to Start and press OK to start the
upgrade process.
After a few seconds, the receiver asks: “Are you sure to burn ash?”. Select Yes to nalize the
upgrade or No to quit without upgrading.
Note: If, after a software upgrade, the receiver should behave in an
unexpected way, please perform a factory reset as well. See
chapter 7.4.2.
Warning: After an update the receiver restarts automatically. During the
upgrade process NEVER disconnect the receiver from the mains
or switch o the power! Doing so might damage your receiver
and will void warranty!
7.4.5 Channel Dump and Load function
This feature allows you to load a channels list quickly and use a channel list that previously
was created on this (backup) or another receiver from the same model via the USB port. This
is useful when more receivers have to be installed in the same region, thus omitting a full scan
and (optional) sorting of channels. It is also useful as a backup for your own unit.
Channel Dump function (backup to USB)
Have a storage device connected to the USB port of the receiver. Select Upgrade by USB from
the Tools menu and press OK to proceed. The upgrade menu will now be displayed.
Use p q to select Update Mode and choose the option Dump channel list.
Use p q to select Upgrade File. A DataBase le name containing date and time will be
presented, format DBYYYYMMDDHHMM (DateBaseYearMonthDateHourMinute.udf).
Use p q to select Start and press OK to proceed. The channel list and favourites will be saved.
Update Channel list function (read from USB)
Have the storage device connected to the USB port of the receiver, containing a previously
made channel list on this unit or another of the same model. Select Upgrade by USB from the
Tools menu and press OK to proceed. The upgrade menu will now be displayed.
Use p q to select Update Mode and choose the option Update Channel list.
Use p q to select Upgrade File. Select the correct database le name, format
DBYYYYMMDDHHMM (DateBaseYearMonthDateHourMinute.udf).
Use p q to select Start and press OK to proceed. Conrm the upgrade with OK to proceed.
Warning: Old channel list and favourites will be overwritten.
After completion, the unit will reboot and come back with the rst channel in the new channel
list.
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Thomson THT504 plus wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Thomson THT504 plus

Thomson THT504 plus Bedienungsanleitung - Deutsch - 35 seiten

Thomson THT504 plus Bedienungsanleitung - Französisch - 32 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info