658780
12
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
8
Scan mode: Select All to store scrambled and free to air channels or select Free
to store only free to air channels. Note: Scrambled channels cannot
be viewed with this receiver.
Connection: Use this option to adjust the established connection to your TV set.
Select HDMI or TV SCART.
*Availability of DVB/HoH subtitles depends on the broadcast. If such subtitles are not supported, then most likely
subtitles can be activated via Teletext if available.
When all settings have been made, move the highlight to OK and press OK to continue.
NOTE: Wrong region selection can lead to missing channels or channels
being stored at wrong positions in the channel list.
The receiver will now advance to the Aerial Adjustment screen.
This part of the wizard is of great help when setting up your antenna system.
Use pq to move the highlight to the setting you wish to alter and use tu to change values.
The following settings are available:
Antenna Power: Set to On if you use an active antenna. When set to On, 5 V will
be present at the ANT IN connector of the receiver. Select O for
passive antennas.
Beeper: Select On for an audible indication of signal reception. O turns the
beeper o.
Channel No.: Select a channel that is known to carry a broadcast in your region.
The Signal Strength and Signal Quality bars give a visual indication
of the reception. Adjust your antenna to obtain maximum signal
strength and quality.
When all settings have been made, press OK to start scanning.
The receiver will search for all available channels now. Once scanning is nished, the receiver
switches to viewing mode.
TIP: If the Welcome menu does not appear after switching on the
receiver the rst time, reset the receiver to factory settings by
pressing the MENU button and selecting Load Factory Setting in
the submenu Tools. (DEFAULT PIN: 1234).
5.0 QUICK GUIDE TO USING YOUR RECEIVER
We at STRONG understand that you can’t wait to enjoy your new high denition digital
terrestrial receiver. The following quick guide will make you familiar with the basic operation
of this device. We do, however, advice you to read the full user manual to get the best
performance from your receiver.
To turn your receiver ON or to Standby, use the q button on the remote control.
Choose the desired channel with the pq buttons. Alternatively, you can digit the channel
number with the 0~9 buttons on the remote control or press OK in viewing mode to display
the channel list. The volume can be adjusted with the tu buttons.
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Thomson THT504 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Thomson THT504

Thomson THT504 Bedienungsanleitung - Französisch - 30 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info