Bedienungsanleitung Thomson THT522 (Seite 20 von 28) (Englisch)

658776

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

P16

MAIN MENU

7.3.2 TV System

Use this menu to match your receiver to your TV set. The following settings are available:

Video Resolution: Use this option to select the video resolution of your TV screen. The options

are: By Source (automatic detection of video resolution offered to the

receiver), By Native TV (automatic detection of maximal resolution of TV

screen), and manual selections 480i, 576i up to 1080p. Please use a setting that

matches the specifications of your TV. After a selection is made, you will be

asked to confirm. Selection above 576i is only applicable on HDMI output.

Aspect Mode: Use this option to select the aspect ratio of your TV and the preferred

conversion method. The options are: Auto (automatic detection of aspect

ratio), 4:3 PS (Displays 16:9 widescreen broadcasts full screen on your 4:3 TV),

4:3 LB (black bars on top and under the picture on a 4:3 TV) and 16:9 (use this

setting for 16:9 TV sets).

Connection: Use this option to select the connection to your TV set. Select HDMI or TV

SCART. If connection type HDMI is selected, then only the CVBS signal is

available on the TV SCART.

Digital Audio Output: Toggles between PCM and BIT Stream output. When PCM is selected, all

digital audio will be converted to (analogue) stereo audio. BIT Stream enables

you to listen or transfer Dolby® Digital/ Dolby® Digital Plus* audio to the TV

via HDMI or to a Home entertainment system (for example) through coaxial

S/PDIF.

*Dolby and the double-D symbol are registered trademarks of Dolby Laboratories

7.3.3 Local Time Setting

Here you can set up your region and time zone.

Region: Use tu to select the region you live in.

GMT Usage: Set to By Region for broadcaster defined time, User Define to select manual a

GMT zone or to Off to input time and date manually.

GMT Offset: Allows you to adjust your time zone. This option is only available when

GMT Usage is set to User Define.The GMT Offset range is "-11:30 ~ +12:00",

increasing by half hours progressively. The cities matching the set GMT Offset

are displayed at the bottom of the screen.

Daylight Saving: Select Off or On to add one hour for summer time.

Date: Date and Time settings are available only when GMT Usage is set to Off. Use

the 0~9 buttons to enter the date. Press EXIT to proceed.

Time: Date and Time settings are available only when GMT Usage is set to Off. Use

the 0~9 buttons to enter the time. Press EXIT to proceed.

Time Display Select On to display time on screen, Off to remove.

7.3.4 Timer Setting

This menu allows you to set up to 8 timed events for recording or waking up the receiver.

Use pq to select Timer Setting from the System Setup menu and press OK to enter.

The receiver will display a list with 8 timers, followed by their respective status. Select the timer

you wish to set or change with pq and press OK to proceed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson THT522 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Thomson THT522

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info