Bedienungsanleitung Thomson THT709 (Seite 15 von 22) (Englisch)

699585

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

English

7.3 LCN (Logical Channel Numbering)

If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the broadcaster,

channels will be stored in a broadcaster dened order. Set LCN to On to activate broadcaster dened

channel numbering or O to store channels in found order. This function only applies when a new

channel search is performed.

NOTE: For successful editing of channel list (see ch 7.1), switch Off LCN function.

7.4 Picture

Use this menu to match your receiver to your TV set.

The following settings are available:

Aspect Ratio: Select the aspect ratio that matches your TV. This There is either a 4:3 or a

16:9 possibility. Select in combination the preferred conversion method how

to show a 16:9 programme on a 4:3 TV, or a 4:3 programme on a 16:9 TV.

The options are:

Auto In most cases this default setting should sufce, but it can be changed to

cope with broadcast errors or personal taste.

4:3 Letterbox The full 16:9 programme will be displayed on your 4:3 TV set with black bars

above and below the picture

4:3 Pan&Scan A centre cut-out of the 16:9 programme will be displayed full-screen on

your 4:3 TV, missing content to the left and right.

4:3 Full A 16:9 programme will be compressed sideways on a 4:3 TV, to show a full

picture without any black bars

16:9 widescreen A 4:3 programme will be show full screen, with sideways stretched content.

16:9 Pillarbox A 4:3 programme will be shown normally, but with black bars to the left and

right.

16:9 Pan&Scan A 4:3 programme will be shown as a centre blow up to ll the whole screen,

missing content to the left, right, top and bottom of the programme.

16:9 Pillarbox 16:9 Pan&Scan

broadcasts in full screen on a 4:3 TV. Letterbox: black bars on top and

bottom of the picture on a 4:3 TV. Combined: shows a mix in-between.

Ignore: shows as it is.

Resolution If the video quality does not appear correctly, change the setting. These

settings match the most common settings for HDMI.

576i: For analogue TVs (on Scart connection).

576p: For digital SD TVs (some digital TVs do not support this mode).

720p: For digital HD TVs (on HDMI connection).

1080i: For digital HD TVs (on HDMI connection).

1080p(50Hz): For digital HD TVs (on HDMI connection).

Auto: The best possible resolution available will be auto negotiated by between

TV and receiver (‘handshake') when using a modern digital HD TV when

connected with an HDMI cable.

TV Format Options are PAL and NTSC. For European broadcasts, the TV format is PAL

(Default). The setting is most important for TVs connected via Scart cable.

Using NTSC might deliver black& white pictures.

7.5 Channel Search

Auto Search This menu allows you to search for channels from all available frequencies

for your selected region automatically. Be aware that all previous installed

channels and favourite list(s) will be deleted. The new-found channels will be

installed in the channel list and afterwards you can create a new favourite

list if you like. Press OK to start the scan.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson THT709 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Thomson THT709

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info