480548
7
Zoom out
Zoom in
Vorherige Seite
1/19
Nächste Seite
P4
CONNECTION
1.4 Accessories
1 User Manual
1 Remote control unit
2x Batteries (AAA type)
1 Infrared Eye
USB to mini-USB converter cable.
NOTE:
The batteries should not be recharged, disassembled, electrically short-circuited or be
mixed or used with other types of batteries.
If rechargeable accumulators instead of batteries are going to be used, we recommend using
(e.g. NiMH) types with low self-discharge to ensure long time operation of remote control.
1.5 Usage of external USB devices
It is recommended to use USB 2.0 storage devices. If your device is not compatible to USB
2.0 specifications, recording, playback and other multimedia functions of the receiver would not
work properly.
To ensure best performance of your USB storage device please format it by this receiver (menu
Media+ Disk Format) to FAT system. Not all file systems are supported by the receiver.
When using an external USB HDD (Hard Disk Drive) with the receiver, please note that some
HDD’s might draw more power than the receiver can deliver (5 V / 500 mA). If so, please
connect your USB HDD to an appropriate external power adapter. THOMSON cannot
guarantee compatibility with all types of USB storage devices.
It is advised not to store important information on USB storage devices used with the receiver.
Always make backups of data on USB storage devices before using them with the receiver.
THOMSON will not take responsibility for any loss of information or circumstances caused by
loss of information.
2.0 CONNECTION
Connecting to TV, Terrestrial Antenna, IR Eye and Main Power
Fig. 1
To receive the broadcast signal, the terrestrial antenna cable should be connected to the ANT
IN connector of the receiver. Then connect the IR connector into the receiver and make sure
it is fully inserted into the IR sensor input. Afterwards you can plug in the power adapter to
the main power source (100 ~ 240 V AC, 50/60 Hz Auto detecting). After all connections are
established carefully, the IR eye LED must light up. If not, the Remote Control will not react.
Connection to a VCR
Fig 2
Connecting to DVD Recorder
Fig 3
Connecting to a Projector/Audio Amplifier
Fig 4
2.1 Default PIN- code: 0000
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Thomson THT91 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info