Bedienungsanleitung Thomson TSR600CI (Seite 14 von 23) (Englisch)

475000

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

MAIN MENU

P11

English

7.1.4 Satellite Edit

Here you can edit transponder data or add a new satellite.

On the left of the screen, a list with all available satellites is displayed. The right of the screen

displays a list will all available transponders for the highlighted satellite.

ADDING OR EDITING A TRANSPONDER

Use

pq to highlight the desired satellite. Press u to move the highlight to the transponder

list. Press YELLOW to add a transponder or use

pq to highlight the transponder to be edited

and then press BLUE to enter the edit screen. Use

pq to navigate in the edit screen and use

tu respectively 0~9 to change the settings. Once all settings are made, press GREEN to

save or EXIT to quit without saving.

EDITING AN EXISTING SATELLITE

Use

pq to highlight the satellite you wish to edit. Press BLUE to go to the Satellite Edit

screen. To edit the name of the satellite, use

pq to highlight the name and press OK. A

keyboard will pop up. Use

pq tu to navigate and OK to input the chosen character. Once

ﬁnished press GREEN to save the changes or EXIT to quit without saving. To edit the position

of the satellite, use

pq to move the highlight to Position and use the 0~9 buttons to input the

new position. To change the location, use

pq to highlight Location and use tu to change

the location. Possible settings are: East and West. Once all settings are made press GREEN to

save or EXIT to quit without saving.

ADDING A SATELLITE

To add a satellite, make sure the highlight is not in the transponders list (press

t in case of

doubt) and press YELLOW. The procedure for adding a satellite is the same as for editing

a satellite.

7.2 Setup

Use the Setup menu to conﬁgure the system settings of your receiver. The following sub-menus

are available: Language, Output Options, Time Setting, Parental Control and OSD Display.

Choose the desired submenu with

pq and press OK to advance.

7.2.1 Language

Here you can set the preferred Display, Audio and Subtitle languages and Country setting.

Use

pq to highlight the setting you wish to change and tu to change the value of the

highlighted setting. Press OK for a list with all available options for the chosen setting.

Display: This setting affects the menu language of your receiver. All menu’s

and messages will be displayed in this language.

Audio: is the preferred audio language. The receiver will automatically

switch audio to the preferred language whenever available.

Subtitle: Whenever available, subtitles will be displayed in the

selected language.

Country: Here you can set your country of residence.

Once all settings are made, press EXIT to leave the Language menu. A conﬁrmation banner will

be shown. Press OK to save your settings or EXIT to discard.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson TSR600CI Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Thomson TSR600CI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info