Bedienungsanleitung Thomson TV-VCR-DVD (Seite 10 von 40) (Englisch)

628197

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Connections and Setup

Tuning in TV channels

The first time you use the DVD/VCR, you will see the ACMS (Automatic Channel Memory

System) displayed on the screen.This system automatically tunes and stores TV channels. If you

want to return to ACMS after your initial set-up, access it via the menu (ACMS ).

Automatic channel search

Switch the television set on.

2. Press the button to turn the appliance on and then press the VCR button on the remote

control.

3. Select the AV channel on the television set.The

ACMS menu screen appears. Use the and

buttons on the remote control to select a country

code: A:Austria, B: Belgium, CH: Switzerland, D:

Germany, DK: Denmark, E: Spain, F: France, I: Italy, N:

Norway, NL: Netherlands, P:Portugal, S:Sweden, SF:

Finland, OTHERS.

4. Press OK to start the automatic tuning process.

5. When the automatic channel search is completed a screen showing all the channels that have

been found and the positions they have been placed in is displayed.

Note: If the station transmits VPS/PDC signals, the station name will be added automatically.

6. The automatic channel set-up assigns the numbers to the channels in a predefined order.

These numbers may therefore not match the actual channel numbers. Should this be the case,

change these numbers by carrying out the instructions below (see "Sorting the channels").

7. Press to store the settings.

Note:After the automatic channel search has taken place, the time and date will set automatically. If the time is

shown as --:-- on the display window, it means that the signal was too weak to allow the clock to be set

automatically. If you wish to manually set the clock, see "Setting the clock" on page 18.

Sorting the channels

For easy channel identification, we suggest that you have a TV magazine at hand.

1. Press the VCR button. Press to access the main menu. Use the and buttons to select

PR SET then press

OK.

2. Press again.

3. To move a channel, use the and buttons to

select the programme number that you wish to move.

Then press . Press and until you reach the

position you wish to store the channel in. Press

OK.

The channel will move to the new position.

4. To delete a channel, use the and buttons to

select the channel number you wish to delete and

press .After a short while the selected channel will

be deleted.The remaining channels are resorted

automatically.

5. Press to leave the menu.To move or delete other channels, repeat the above process.

SET

Pr-12

ACMS

NNLPSSFOTHERS

B D DK E F I

Pr-12

ACMS

02 C03 00 PR-02

03 C04 00 PR-03

04 C05 00 PR-04

05 C06 00 PR-05

06 C07 00 PR-06

07 C08 00 PR-07

08 C09 00 PR-08

01 C02 00 PR-01

,DELETE :

MOVE :

SET

DTH6300E_EN 28/05/04 18:48 Page 10

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson TV-VCR-DVD Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info