Bedienungsanleitung Thrustmaster Dual Trigger 2-in-1 Rumble Force Playstation 2 and PC (Seite 3 von 43) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

564292

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

2/6

INSTALLATION ON PC

System requirements: PC (Windows 98 SE, Me, 2000, XP) equipped with USB port.

The CD-ROM included with this product allows you to install the Force Feedback drivers.

1. Insert the installation CD-ROM into your CD-ROM drive. Follow the on-screen instructions to install

the Force Feedback drivers. Once the installation is complete, click Finish and restart your computer.

2. Once your computer has restarted, connect the USB connector (10) to one of your computer’s USB

ports. Windows 98/Me/2000/XP will automatically detect the new device. (If you are connecting a

USB device for the first time, Windows may ask you to insert the Windows CD-ROM during the

installation procedure in order to install the required system files.)

3. Driver installation:

Windows 98

: the Add New Hardware Wizard will search for the appropriate drivers. Click Next.

Follow the on-screen instructions to complete the installation.

Windows Me/2000/XP

: the drivers are installed automatically.

4. Select Start/All Programs/Thrustmaster/Force Feedback driver/Control Panel. The Game

Controllers dialog box displays the gamepad’s name with OK status.

5. In the Control Panel, click Properties to configure your gamepad:

• Test device: allows you to test and visualize the buttons, the D-Pad, and the axes of the 2 mini-

sticks and the 2 triggers.

• Test forces: allows you to test 8 vibration effects and configure the vibration effect settings.

INSTALLATION ON PS2

1. Plug the gameport connector on the PS2 cable (11) into a controller port on your console.

2. Turn on your console and start up your game.

You are now ready to play!

ADVANCED FUNCTIONS

• MODE button (6): press this button to switch between modes.

- Analog mode (default on PS2 and PC): MODE button (6) lights up blue.

- Digital mode: MODE button (6) is not lit up.

• TURBO button (8): allows you to repeat an action continuously (does not work with mini-sticks or

START + SELECT buttons).

- Simultaneously press the TURBO button (8) + the button whose action you want to repeat. The

MODE LED turns red. Turbo mode is now enabled.

- To disable Turbo mode, repeat this procedure. The MODE LED turns off. Turbo mode is now

disabled.

TRIGGER MAPPING

All analog buttons (on PS2) or digital buttons (on PC) and mini-stick directions (axes) can be mapped to

the left and right triggers (except D-Pad and START, SELECT, L3 and R3 buttons).

• MAPPING button (7) (used to map left and right triggers):

- Press and release the MAPPING button (LED flashes slowly).

- Press and release the button or direction you want to assign to the trigger (LED flashes quickly).

- Press and release the trigger assigned to this function (LED turns off).

• EEPROM:

Your gamepad includes an internal memory chip, which stores your last mapping configuration even if you

turn your gamepad off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thrustmaster Dual Trigger 2-in-1 Rumble Force Playstation 2 and PC Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info