Bedienungsanleitung Thule Jetbag 350 (Seite 4 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

781545

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Dear customer

we are pleased that you have decided to purchase our

product and hope you enjoy using it. However, it is im-

portant that before ﬁ tting your roof box you read these

instructions carefully. We hope you have lots of fun with

your new roof box!!

Before itting the roof box

This roof box ﬁ ts all common roof racks with the following

supporting rod dimensions:

Max. width: 80 mm

Height: 15 mm to 32 mm

The holes already drilled into the ﬂ oor of the roof box

mean that the bars of the roof rack have to be positio-

ned as follows:

Minimum distance 540 mm

Maximum distance 990 mm

For reasons of stability, the distance between the bars of the

roof rack should always be positioned as far apart as possible

unless the vehicle or roof rack manufacturer states otherwise.

The roof box, once ﬁ tted, should not project out at the rear

or the front of the vehicle. If possible position the roof box

so that the bonnet and boot can be opened easily. If you

wish to ﬁ x the roof box to a roof rack with T-groove racks,

we can provide roof rack speciﬁ c adapters. These adapters

can be purchased from the dealer.

Fitting the roof box

Once you have determined the correct position of the roof

box on the roof rack taking the above mentioned factors into

consideration, ﬁ x the roof box to the roof rack as described

below.

To do this push the ﬁ xing brackets from below around the

roof rack and through the drilled holes in the ﬂ oor of the

roof top cargo box.

Tighten the thumb nuts equally by hand. To ensure that the

roof box is attached securely the thumb nuts must be tighte-

ned with a torque of between 2 - 2.5 Nm - this torque can be

easily achieved without the help of tools.

Please ensure that the ﬁ xing brackets are ﬁ tted equally.

Open drill holes

Please cover the open drill holes using the stickers provided

once the roof box has been attached.

Loading the roof box

The maximum load for your roof box is 50 kg. Never exceed

the permissible roof load for your vehicle (see operating in-

structions of the vehicle).

Make sure that you distribute the load in the roof box evenly

as described and note the loading height of the closed roof

box.

Securing the loads in the roof box

Always secure the luggage in the roof box using suitable

belts (depending on the roof box model, either included

in delivery or available as an accessory).

If you are transporting skis, they must be secured with the

appropriate belts and/ or ski holders (depending on roof box

model either included in delivery or available as an

accessory).

Order no. for ski holders:

Type 500, 310 - order no.: 698

Type 700, 470 - order no.: 699

Type 900, 570 - order no.: 700

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thule Jetbag 350 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info