Bedienungsanleitung Time DRE-2120 (Seite 178 von 184) (Deutsch, Englisch, Holländisch, Französisch)

47134

178

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

Additional Information

Troubleshooting

Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with

this component, check the points below. Sometimes the trouble may lie in another component. Inspect the

other components and electrical appliances being used. If the trouble cannot be rectified after checking the

items below, ask your nearest authorized service center or your dealer to carry out repair work.

The disc is ejected automatically after

• Dirty or damaged disc

• Align the disc properly.

• If the region number on a DVD-Video disc does not match the number on the

player, the disc cannot be used.

• Allow time for condensation to evaporate. Avoid using the player near an air-

conditioning unit.

• Playback is not possible.

• Reload the disc with the label side face up.

• The operation is prohibited by the player and / or disc.

• Switch the power off once using the front panel STANDBY/ON button and then

switch on again using the front panel STANDBY/ON button.

• Disconnect the power plug and reinsert it back into the wall.

• Some settings can be changed while a disc is playing, but are not effective

until the disc is stopped then restarted.

• This is not a malfunction. Make the same setting when the player is stopped.

• When the power is cut due to power failure or by unplugging the power cord,

settings will be canceled.

• Incorrect video connections. Check that connections are correct and that plugs

are inserted fully.

• TV/monitor or AV amplifier settings are incorrect. Check the instruction manual

of the connected equipment.

• The Component output menu is set to progressive but your TV/monitor is not

compatible with progressive scan.

• Reconnect the player to your TV using a composite or S-Video cord and set

the TV to appropriate input.

• The type of the disc is wrong, it's not a DVD+RW or DVD+R disc.

• The disc is recorded fully.

• The DVD+R has been finailized.

• The TV aspect ratio setting in the Setup menu is incorrect. Set the TV aspect

ratio option to match the TV/monitor you're using.

• This player is compatible with Macro-Vision System copy guard. Some discs

include a copy prevention signal, and when this type of disc is played back,

stripes etc., may appear on some sections of the picture depending on the TV.

SolutionProblem

Disc not seated properly in the disc

guide.

Incompatible region number.

Condensation inside the player.

mark appears on screen.

Disc is loaded upside down.

New settings made in the Setup screen

menus while a disc is playing are

ineffective.

Settings are canceled.

Picture playback stops and the

operation buttons cannot be used.

No picture / No color

The DVD recorder cannot record.

Screen is stretched or aspect does not

change.

Picture disturbance during playback or

dark.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Time DRE-2120 Seite 178

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info