3
ENGLISH 032-095000-02
Register your product at www
REVISED 12.4.15
return completely to the zero position at midnight, and can become further
out of calibration until the battery is replaced. T
power until it is replaced the INDIGLO
®
night-light will not function until the
battery has been replaced. The activity tracking function will remain active
until the battery has been completely depleted, but new data will not
be stored.
B
Before replacing the battery, it is recommended that you synchronize
to the phone to make sure you have retrieved all of the latest activity
data from the watch. After the battery has been replaced, the watch will
automatically calibrate the sub-dial hands. Upon completion of the auto-
calibration process, the upper sub-dial hand will point to “OFF” and the
lower sub-dial hand will be positioned at ZERO. The activity tracking function
will be off. Y
watch with the Smartphone application. Open the Timex Connected app on
your phone. Press and hold button A. The upper sub-dial hand will move
to the Bluetooth
®
symbol. Perform the synchronization of the watch and
Smartphone application. Once the watch has been synchronized with the
Smartphone, the activity tracking function can be activated.
ST
The power may be removed from the watch for storage. Pull the cr
the outer position. The hour
and the activity tracking function will be completely inactive after 30 minutes
with the crown in this position.
FIRMW
As updates for the Smartphone application are published you will receive
notification through your Smartphone application. The firmware update will
delete all activity recorded for the curr
the update be done early in the day to minimize the loss of recorded
activity
platforms and the various devices within each platform. The average length
of time for the synchronization is 5 to 10 minutes, but in extreme cases
could take as many as 30 minutes. During the synchronization you should
place the watch and the smartphone on a flat surface next to each other
moving them until the synchronization process is complete. While the update
via synchronization is occurring the lower sub-dial hand will indicate the
progress of the download, moving fr
STRIDE LENGTH ADJUSTMENT
The Timex Metropolitan+ uses an algorithm for distance measurement which
automatically determines your stride, based on your height and speed. If you
find the distance reported does not match your actual walking or running
distance you can calibrate the distance by up to +/- 25% via the Smartphone
application. This is done by the distance adjustment option on the watch
section of the application.
W
W
BUTTONS UNDER W
1.
remain intact.
2.
3.
If your watch is waterO ) is indicated.
Water p.s
30m/98ft 60
50m/164ft 86
100m/328ft 160
200 m/656ft 284
* pounds per square inch absolute.
1 A
©2015 Timex Group USA, Inc. TIMEX, TRUE SINCE 1854 TIMEX and INDIGLO are
registered trademarks of Timex Gr
and logos are register
marks by Timex is under license.
FCC NO
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L
conditions suivantes : (1) l’appareil ne doit pas produir
l’utilisateur de l’appareil doit accepter tout br
même si le brouillage est susceptible d’en compromettr
fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada.
T
its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r
Conformément à la réglementation d’Industrie Canada, le présent émetteur
radio peut fonctionner avec une antenne d’un type et d’un gain maximal
(ou inférieur) approuvé pour l’émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage radioélectrique à l’intention
des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte
que la puissance isotrope rayonnée équivalente (p.i.r
l’intensité nécessaire à l’établissement d’une communication satisfaisante.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide r
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—
—
—
which the receiver is connected.
—
DECLARA
Manufacturers Name: Timex Group USA, Inc.
Manufacturers Address: 555 Christian Road
Middlebury
United States of America
declares that the product:
Product Name: Timex
®
Metropolitan+
Model Numbers: M372
conforms to the following specifications:
R&TTE: 1999/05/EC
Standards: CENELEC EN 55022
ETSI EN 301 489-1
ETSI EN 301 489-3
ETSI EN 301 489-17
ETSI EN 300 440-2
L
Standards: IEC 60950-1
CENELEC EN 60950-1
Digital Device Emissions
Standards:
Radiators
FCC 47CFR 15B clA Part 15 Subpart C 15.247 (Bluetooth)
IC RSS 210 Issued:2010/12/01
ICES 003
SAI AS/NZS 4268
Agent:
Sam Everett
Quality Regulatory Engineer
Date: 11 July
