Bedienungsanleitung Timex W260-M229 (Seite 20 von 311) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

466715

Zoom out

Zoom in

Vorherige Seite

1/311

Nächste Seite

2. Press q to highlight SAVE, then press 8 . Your current position displays.

3. Press  or q to select YES, then press 8 to save the waypoint and return to the Waypoint List. Select NO,

then press 8 to return to the Waypoint List without saving.

NOTE: You can edit the latitude and longitude. Press  to move to the latitude ﬁeld. Press 8 to edit the

degrees, minutes, seconds, or fractional seconds. Press q to select Save, then press 8 to save your changes.

View the Waypoint List

1. Open the Waypoints menu.

2. Press q to highlight LIST ALL, then press 8 . The Waypoint List displays.

3. Press q to highlight a waypoint, then press 8 to view the waypoint details.

Rename a Waypoint

1. Open the Waypoint List.

2. Press q to highlight a waypoint, then press 8 to view the waypoint details.

3. Press q to highlight RENAME, then press 8 .

4. Press 8 to open the character list. Press q to highlight the desired character, then press 8 to conﬁrm

your selection. Continue selecting characters to spell the desired waypoint name. The waypoint name can

contain up to six characters. Press 8 when the desired name is entered.

Delete a Waypoint

1. Open the Waypoint List.

2. Press q to highlight a waypoint, then press 8 to view the waypoint details.

3. Press q to highlight DELETE, then press 8 .

4. Press q to highlight YES, then press 8 to delete the waypoint and go back to the Waypoints menu. Press

 or q to highlight NO, then press 8 to go back to the waypoint details without deleting the waypoint.

GOTO to a Waypoint

Use the GOTO feature to plot a route from your current location to a saved waypoint.

1. Open the Waypoint List.

2. Press q to highlight a waypoint, then press 8 to view the waypoint details.

3. Press q to highlight GOTO? then press 8 .

A pop-up message asks if you would like to store your workout data for this event. The map displays. Your

current location is in the center of the map. A line connects your current location to the waypoint.

Press 8 to switch to the compass view. The compass arrow indicates the direction to the waypoint.

If the chronograph is running in Performance Mode, the chronograph will automatically take a split when you

reach a waypoint. A message alerts you that the waypoint has been reached, and the chronograph begins

timing a new split.

Delete All Waypoints

1. Open the Waypoints menu.

2. Press q to highlight DELETE ALL, then press 8 .

3. Press q to highlight YES, then press 8 to delete all stored waypoints and go back to the Waypoints menu.

Press q to highlight NO, then press 8 to go back to the Waypoints menu without deleting the waypoints.

Routes

Routes are collections of waypoints organized in a sequence of your choosing. You can follow a route during a

workout, then save the workout data for later use with the Performance Pacer feature.

Open the Routes Menu

1. Press the MODE button until NAVIGATE appears.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Timex W260-M229 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Timex W260-M229

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info