Bedienungsanleitung Timex W292-Marathon (Seite 2 von 18) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

644258

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

ENGLISH 083-083-095000

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from date

of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by

calling 1 800-448-4639 during normal business hours. Payment must be made

within 30 days of purchase. Name, address, telephone number, purchase date,

and 5-digit model number required. You can also mail a check for $5 to: Timex

Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.

Please read instructions carefully to understand how to operate your Timex®

watch.

FEATURES AND BASIC OPERATION

Your model may not have all of the features described in this booklet.

• Date with MM-DD (month/day) format

• 2 time zones

• Alerts with audible tone

• Optional hourly chime

• 24-hour stopwatch

• Daily alarm

• INDIGLO® night-light

Press MODE repeatedly to step through modes: Alarm, Stopwatch and 2nd

Time Zone. Press MODE to exit current mode and return to Time mode.

MODE

(NEXT STEP)

START/STOP

(DÉMARRER/ARRÊTER)

(AUGMENTER VALEUR)

INDIGLO®

BUTTON

SET

(DONE)

Button functions shown with setting functions in parentheses

TIME

To set time and date:

1) With time and date showing, press SET and hold for 2 seconds.

2) Seconds ash. Press START/STOP to set seconds to zero.

3) Press MODE. Hour ashes. Press START/STOP to change hour, including

AM (no symbol) and PM.

Note: Press and hold START/STOP to rapidly advance changes.

4) Press MODE. Minutes ash. Press START/STOP to change minutes; hold

button to scan values.

5) Press

MODE. Year ashes. Press START/STOP to change year.

6) Press MODE. Month ashes. Press START/STOP to change month.

7) Press MODE. Date ashes. Press START/STOP to change date.

8) Press SET, at any step, to exit and save settings.

With time and date showing, press SET to switch between 12- or 24- hour time

format.

Date (day of month) appears in upper part of display in Time mode. Press and

hold START/STOP to see month, date, and year in large digits.

ALARM

Watch has a daily alarm. Press MODE repeatedly until AL appears.

To set alarm:

1) Press

SET. Hour ashes. Press START/STOP to change hour, including AM

(no symbol) and PM.

2) Press MODE. Minutes ash. Press START/STOP to change minutes; hold

button to scan values.

3) Press SET, at any step, when done setting.

To turn on/o alarm and hourly chime, press START/STOP repeatedly. Watch

will step through four combinations of alarm and chime settings. Alarm icon s

appears when alarm is on. CHIME icon b appears when hourly chime is on

– watch will chime on every hour.

When alarm sounds, press any button to silence. If no button is pressed, alarm

will sound for 60 seconds.

Alarm repeats daily unless turned o.

STOPWATCH

This mode provides a stopwatch function for timing events. Press MODE

repeatedly until SP appears.

To start, press START/STOP. Stopwatch counts up by hundredths of a

second up to 30 minutes, then by seconds up to 24 hours before starting over.

To stop, press START/STOP.

To resume, press START/STOP, or to reset (clear) stopwatch, press SET.

While stopwatch is running, press SET to take lap/split and see your time up

to that point. Display freezes while stopwatch continues to run. Press SET to

resume display of running stopwatch.

Stopwatch continues to run if you exit mode.

TIME 2

Watch can display time in a second time zone. Press MODE repeatedly until T2

appears.

To set 2nd time zone’s time:

1) Press SET. Hour ashes. Press START/STOP to change hour, including AM

(no symbol) and PM.

2) Press MODE. Minutes ash. Press START/STOP to change minutes by 30

from minutes in Time mode. Seconds are the same as in Time mode and

can only be set there.

3) Press SET, at any step, when done setting.

INDIGLO® NIGHT-LIGHT

Press INDIGLO® button to illuminate watch display for 2-3 seconds.

Electroluminescent technology used in the INDIGLO® night-light illuminates

entire watch face at night and in low light conditions.

WATER AND SHOCK RESISTANCE

If your watch is water-resistant, meter marking or (O) is indicated.

Water-Resistance Depth p.s.i.a. * Water Pressure Below Surface

30m/98ft 60

50m/164ft 86

100m/328ft 160

*pounds per square inch absolute

WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY

BUTTONS UNDER WATER.

1. Watch is water-resistant only as long as lens, push buttons and case remain

intact.

2. Watch is not a diver watch and should not be used for diving.

3. Rinse watch with fresh water after exposure to salt water.

4. Shock-resistance will be indicated on watch face or caseback. Watches are

designed to pass ISO test for shock-resistance. However, care should be

taken to avoid damaging crystal/lens.

BATTERY

Timex strongly recommends that a retailer or jeweler replace battery. If

applicable, push reset button when replacing battery. Battery type is indicated

on caseback. Battery life estimates are based on certain assumptions regarding

usage; battery life may vary depending on actual usage.

DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP

LOOSE BATTERIES AWAY FROM CHILDREN.

TIMEX INTERNATIONAL WARRANTY

http://www.timex.com/productWarranty.html

registered trademarks of Timex Group B.V. and its subsidiaries.

Timex W292-Marathon Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Timex W292-Marathon

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info