8
Initial operation procedure
When connecting the telephone system, the local regulations must be observed.
The telephone system is now ready for use. When you pick up the handset of an extension you
will hear the telephone system’s dial tone. When you dial 0 you will hear the continuous dial
tone of the CO line.
Factory pre-set
When delivered and after a reset, the telephone system has the following configuration:
No. Functions D, A, B, CH, F, NL Portugal
1 automatic CO-line access all OFF all ON
2 CLIP presentation at the telephone all ON all ON
3 SMS-port external line 1 OFF OFF
4 SMS-port external line 2 OFF OFF
5 call transfer OFF OFF
6 do-not-disturb function OFF OFF
7 music-on-hold external line 1 ON ON
8 music-on-hold external line 2 ON ON
9 call waiting ON ON
10 day / night day day
11 call external line 1 all ON all ON
12 access external line 1 all ON all ON
13 call external line 2 all ON all ON
14 access external line 2 all ON all OFF
15 long-distance calls authorised all ON all ON
16 dialling restrictions/call blocking all OFF all OFF
17 door opener duration 3 s 3 s
18 direct connection with door intercom all OFF all OFF
19 door bell ring authorisation all ON all ON
20 door opener authorisation all ON all ON
1. Connect the extensions (1...8) in
correspondence with the connec-
tion diagrams.
2. Plug the AC adaptor into the power
outlet.
3. Plug the CO line in the telephone
wall socket.
Extension 1 and extension 2 (2/8 clip only)
must always be connected, because in the
case of a power failure (or if the AC
adaptor is disconnected) it continues to
function.
In addition, the special features of the tele-
phone system can be programmed from
extension 1.
