6
Initial operation
Scope of supply
The tiptel 192/tiptel 193 scope of supply comprises:
m a telephone handset
m a spiral cable
m an ISDN connecting cable
m operating instructions
m an interface cable RS 232
m the WINDOWS software "TipKom" (for Windows 95/98 and 3.11)
m the TAPI driver tiptel phone 1"
The following special accessory is available (only for tiptel 193)
Remote control beeper: The remote control beeper allows you to perform a remote interrogation
of your answering machine with telephones that do not support tone dialling.
Connection
Your tiptel 192/193 is designed for the connection at EURO ISDN point-to-multipoint connec-
tions. Before taking the device into operation, all required connecting cables have to be plugged
in. To do this, turn the device so that the inputs under the telephone are easily accessible:
m Plug the long end of the curled handset cable in the jack. The small end of the cable
has to be plugged in the corresponding receptacle of the handset.
m Plug the telephone connecting cable in the "LINE" jack. Connect the other end of the cable to
the ISDN socket.
m For strain relief, press the cables into the provided cable channels.
ISDN connection
The ISDN access provides a wide range of ISDN features which are supported by your telepho-
ne. Not all of these features are offered by your telephone network provider free of charge. You
need to order some of those separately. You will receive several telephone numbers (MSN) for
your ISDN connection. The first MSN (multiple subscriber number) will be registered automati-
cally after your first telephone call. The provided telephone numbers have to be entered in the
MSN menu in order to be addressable. All further telephone settings or answering machine set-
tings (only tiptel 193) can be configured individually for each MSN. As for the operation within a
telephone system, some features might become restricted. Here, please also refer to the chap-
ters "Access to the public exchange" and "Setting the call transfer function".
