477427
72
Zoom out
Zoom in
Vorherige Seite
1/76
Nächste Seite
Operation (UK)
Configuration and Settings
Planning and Installation
Analogue Telephone System
tiptel 2/8 USB
tiptel
Contents
2
General............................................................................................................... 4
Scope of delivery ......................................................................................................... 4
Notes on this Manual ................................................................................................... 4
Abstract ........................................................................................................................5
Features........................................................................................................................5
Accessories (optional) ............................................................................................ 7
Suitable terminal units ................................................................................................. 7
Telephones ............................................................................................................. 7
Indicators (LEDs) ......................................................................................................... 8
Overview of audio and call signals.............................................................................. 9
Operation ........................................................................................................... 10
Telephone number plan .............................................................................................. 10
Mains power failure................................................................................................. 11
Setting up a call ........................................................................................................... 12
Internal telephone calls........................................................................................... 12
Outgoing external call............................................................................................. 12
Query....................................................................................................................... 14
Query with call forwarding...................................................................................... 14
Subscriber features........................................................................................... 18
Pick up a call........................................................................................................... 18
Call deflection ......................................................................................................... 18
Reserve an external line ......................................................................................... 19
Speed dialling ......................................................................................................... 20
Call completion on busy subscriber (internal)....................................................... 20
Signal call waiting ................................................................................................... 21
Hold......................................................................................................................... 22
Conference (internal).............................................................................................. 22
Switch off tone dialling temporary.......................................................................... 22
Person call / urgency call ....................................................................................... 23
Call groups.............................................................................................................. 24
Do not disturb ......................................................................................................... 25
Room monitoring .................................................................................................... 25
The fax switch ......................................................................................................... 26
Configuration and settings ............................................................................... 29
PC configuration software ...................................................................................... 29
The programming telephone.................................................................................. 31
External line authorisation ...................................................................................... 32
Setting up external line access .............................................................................. 32
Setting external call signalling................................................................................ 33
Call forwarding with external calls.......................................................................... 34
Activate automatic external line access ................................................................. 35
Set music on hold................................................................................................... 36
Setting up blocked numbers.................................................................................. 37
Contents
3
Activate/deactivate caller ID (CLIP) ........................................................................ 42
Set up call waiting signalling.................................................................................. 43
SMS terminal unit support...................................................................................... 44
Switching between day and night settings............................................................ 47
Set door bell signalling........................................................................................... 48
Set door opener authorisation ............................................................................... 49
Set duration of door opener actuation................................................................... 50
Set direct access to door intercom system ........................................................... 50
Pharmacy function.................................................................................................. 51
Miscellaneous .............................................................................................................. 52
Setting of time and date ......................................................................................... 52
Audio sample of music on hold ............................................................................. 53
Restore factory default settings.............................................................................. 53
Planning and installation .................................................................................. 54
Safety notes on the appropriate use of the telephone system .................................. 54
Environmental compatibility ........................................................................................ 55
Details on the connectors and ports of the telephone system .................................. 56
Mounting the telephone system.................................................................................. 57
Tools and material needed..................................................................................... 58
Define the mounting location ................................................................................. 58
Opening the cabinet ............................................................................................... 58
Wall mounting of the telephone system ................................................................ 59
Installing the cables for the connectors/wall outlets ............................................. 60
Connecting terminal units....................................................................................... 61
Connecting the telephone system to the external telephone lines....................... 62
Connecting the telephone system to mains power............................................... 62
Functional test......................................................................................................... 62
PC connection ........................................................................................................ 63
Installation when using a fax switch ............................................................................ 63
Indicating power line failure......................................................................................... 63
Reset button ................................................................................................................. 64
Optional door module.................................................................................................. 65
Annex.................................................................................................................. 66
Service.......................................................................................................................... 66
Warranty ....................................................................................................................... 67
CE mark........................................................................................................................ 68
Environmental compatibility ........................................................................................ 68
Trouble shooting guide..................................................................................... 69
Basic settings of the telephone system ...................................................................... 70
Technical data ................................................................................................... 72
General
4
General
This Manual as well as the telephone system it refers to are subject to change without
notice. An up-to-date version of this Manual is available as pdf document at
www.tiptel.com. Texts and depictions in this document were prepared with utmost
care, mistakes, however, cannot be rule out completely. The publisher will not
assume any liability for errors or their consequences.
© 2008 Tiptel.com GmbH Ratingen. All right reserved.
Scope of delivery
The carton box of this telephone system contain s:
Telephone system with AC adapter
Two telephone line cords
USB cable for connection to a PC
CD-ROM with drivers and configuration software
User's Manual
Wall mounting set: 2 screws and 2 rawlplugs 6mm
Notes on this Manual
This Manual describes the analogue telephone system tiptel 2/8 USB. To make sure
that apart from the basic functions you will also be able to make use of the numerous
features and advantages of this telephone system you should keep this Manual
available also after the installation. To have better overview this Manual is split up in
three sections dealing with the three main issues:
Operation
Chapter 'Operation' deals with all settings that can be carried out from each of the
telephones via the keypad that are connected as internal extensions of the telephone
system. To make sure that all subscribers can make use of the advantageous
functions and the comfort this telephone system provides this part of the manual
should be available to all users.
Settings and configuration
This chapter addresses the specialist dealer who set up the system and the
owner/user.
Those settings and configuration options are described with which the telephone
system can be adopted to the individual environment and the requirements needed.
A PC software helps you with the complete configuration through a clearly arranged
General
5
depiction of all configuration options. But even without using the PC software most of
the configuration can be made via the telephone 21 at port 1.
Planning and installation
The chapter 'Planning and installation' explains all connectors and ports, gives you
advice on choosing the optimum location, the distribution of the telephone
connections, and on what to keep in mind while mounting and installing the cables.
Abstract
The telephone system tiptel 2/8 USB provides you with ports for up to eight internal
terminal units for internal and - by using the external line ports - external telephone
communication. To support this the telephone system tiptel 2/8 USB comprises a
number of comfort features making telephony even easier.
With two external line and eight internal extension telephony needs of an office, a
handicraft business, or a bigger private household can be dealt with in an ideal way.
The CLIP-function (caller ID function) provides you with information on the caller.
Using the automatic fax switch even with only one external line connected fax
messages and phone calls can be handled in parallel.
LED indicators provide you with information on the current system and functional
status.
Configuration via your PC is well arranged and self-explaining. So, also the
technically interested layman is able to perform the settings required for his local and
personal needs.
The status window of the PC configuration software shows you the status of the
connected telephones and serves as an easy to read busy extension indicator.
This Manual gives you information on the features and explains how to use them.
Features
2 analogue external lines and eight internal extensions
Targeted occupation of external lines for individual charging
Prioritising of external lines
Automatic external line access for comfortable telephony
General
6
External line authorisation to be programmed individually per phone
Reservation of an external line
External line authorisation, semi or full
Authorisations for local, long distance, or abroad calls
Automatic fax reception with integrated and activated fax switch for
external line 1
Forwarding of telephone calls
Music on hold during forwarding process
Internal calls free of charge
Caller ID (CLIP) at all extensions
System telephone book with speed dial list, 100 phone numbers
NAME-CLIP from system telephone book and between the extensions*
Connecting (forwarding) from external line 1 to external line 2
Tone dialling (DTMF), also pulse dialling for internal telephones
Internal conference
Automatic call back with busy internal extensions
Different ringing signals for internal and external calls
Timer controlled day/night programmes
Call waiting signal with external calls while there is an internal call
Pickup, room monitoring
Internal call groups
Person call, urgency call
Adjustable signalling delay with external calls
Do not disturb
Call deflection internal/external
Programmable blocking list with 20 blocked numbers and 16 exception
numbers
Power line failure proof settings
With power line failure external line still can be used (with one
telephone)
Door line intercom system interface (a/b technology)
Door module for (4+n) door line interface available (optional)
Easy configuration of telephone system via telephone or PC (USB port)
Firmware update via PC or server (telephone line)
* Telephones need to support NAME-CLIP (e.g. tiptel 160 or tiptel 272, 274, 275)
General
7
Accessories (optional)
tiptel TSM 1, door intercom module (4+n-technology), no loss of any extensions
Needed when using the pharmacy function when by ringing the door bell
automatically a phone call is being placed to a predefined target and a connection is
made with the door loudspeaker.
Suitable terminal units
Many of the features will be shown on the display of terminal units and can be
activated directly via programmable telephone function keys. Due to the large
number and variety of available terminal units details on their operation cannot be
given here. Please refer to the User's Manual of your terminal units.
This telephone system is suitable for analogue terminal units such as telephones,
cordless phones, answering machines, and fax machines. The scope of operational
features and the use of features depends on the terminal unit your using.
Please refer to the User's Manual of your terminal units.
With this telephone system you may only use analogue terminal units that do have
CE approval and that are in compliance with Standards ETSI ES 203 021orTBR 21.
Telephones
The telephones must comply with the following specifications:
DTMF telephones (dual tone multiple frequency): Telephones which are using tone
signals to transmit their dialling information. Apart from the keys and also
the keys
and
are available. For call forwarding also the flash key (
) is needed.
In addition to the above for being able to use the complete set of features of the
telephone system the following functions should be supported by the analogue
telephones:
CLIP resp. CNIP function: Telephones, that are able to display the caller's telephone
number resp. name.
Note: Telephones that use pulse dialling are only supported with limited functionality.
All functions in connection with the flash key (
) are not being supported.
General
8
Indicators (LEDs)
The indicators (LEDs) provide you with information on the different operational states
of the telephone system. The meaning of each indicator can be found in the table
below.
Name / icon Function LED on LED off
Power
Operational state Mains power on. Telephone
system ready for operation.
Flashing: Reset button pushed
Mains power off. Telephone
system off
Emergency phone at external line
1 ready for operation
L1
External line 1 Connection with ext. line 1
Flashing: Rhythm of the calling
signal
External line 1 in stand by
L2
External line Amt 2 Connection with ext. line 2
Flashing: Rhythm of the calling
signal
External line 2 in stand by
Night Night programme active Day programme active
Fax
Fax switch Fax switch for external line 1
on
Fax switch for external line 1 off
Time control Time control active Time control deactivated
Door line intercom Connected with door intercom
system via optional door
module TSM1
Not connected with door intercom
system
Service
Service Data communication via
remote update
Tone detection
Saving settings
General
9
Overview of audio and call signals
*Internal dialling signal as permanent signal in B, CH, E, F, GR, NL, P, UK
Function details of audio signals
Internal dialling signal
You hear the internal dialling signal as soon as you pick
up the handset. Now you can enter digits via the
telephone's keypad and dial.
Fast internal dialling signal
You hear the fast internal dialling signal (special dialling
signal), when your telephone is set to 'do not disturb' or
call deflection has been activated.
Internal busy signal
You hear the internal busy signal when - after dialling a
number - the target or the function is not available.
Call back signal
You hear the call back signal in case the telephone
system initiates a call back that has been set previously.
Acknowledge signal
You hear the acknowledge signal when after activating or
deactivating a feature or function of your telephone
system.
Error signal
You hear an error signal in case a combination of digits
could not be understood by the telephone system.
Operation
10
Operation
In this User's Manual following icons for activating/deactivating of functions and
features are used:
Pick up handset

Enter digits


Using special keys

R key (flash function)

Hang up
Notes
Telephone number plan
The telephone system uses a fixed not editable number plan. These numbers can be
dialled from each telephone to activate the corresponding function.
Partly functions can be limited through authorisations at particular extension ports, so
that they cannot be executed. In such a case you will either hear an error signal or a
busy signal.
Function Telephone number Brief description
Telephone 1

Call
Telephone 2

Call
Telephone 3

Call
Telephone 4

Call
Telephone 5

Call
Telephone 6

Call
Operation
11
Telephone 7

Call
Telephone 8

Call
Door intercom system
with TSM1

Connect with door
Door opener with TSM1

Actuate door opener
Call group 1

Call of call group
Call group 2

Call of call group
Call group 3

Call of call group
Call group 4

Call of call group
Person call

...

Call all telephones with person call rhythm
Pick Up

Pick up call
Do not disturb

Call signal deactivated
Deactivate 'Do not
disturb'

Call signal allowed
Reserve external line

Call back as soon as external line is available
Automatic call back

Call back as soon as internal line is available
Fax switch on

Fax switch with external line 1
Fax switch off

Fax switch deactivated
Targeted external line 1

Connects with external line 1
Targeted external line 2

Connects with external line 2
External line

Connects with an external line
Mains power failure
In case of a mains power failure or with the AC adapter unplugged telephone 21 is
directly connected with the external line. Telephone 21 in that case can call directly.
All other telephones are inoperative then.
Settings and features will remain saved and will be available again once power
returns or the AC adapter is plugged in again.
Operation
12
Setting up a call
Internal telephone calls
Internal calls can be placed between any two extensions free of charge. The
extensions' telephone numbers are 21, 22, . . . , 28.
Example: Telephone 21 wants to call telephone 22.
Telephone 21: Pick up handset. Internal dialling signal can be heard.

Call an internal number. You hear the calling signal and the called
telephone rings.
In case names have been programmed for the
extensions, NAME CLIP capable telephones
will show the caller's name. Otherwise only
the caller's number will be displayed.
In cased the called telephone is busy you will
hear a busy signal. Hang up and try again later
or activate 'call back on busy'.
Telephone 22: Pick up handset. You are connected to the internal subscriber.
Have your call.
Hang up. End of call.
Extensions that have automatic external line access activated will sound the external
line dialling signal the moment the handset is being picked up. If you want to
place an internal call you will have to press the key first. You will then hear
the internal dialling tone.
Outgoing external call
External call with external line code number 0
With telephones authorised for external line access you can access an external line
by dialling the prefix
and then set up an external connection. Which of the external
lines will be used then depends on your configuration.
Telephone 22: Pick up handset. Internal dialling signal can be heard.
Get access to an external line. If there is an external line available you will
hear the external dialling signal. If the external
Operation
13
line is busy you will hear the busy signal of
your telephone system. In this case try again
later or reserve an external line.
In case your extension is not authorised to
access an external line you will also hear the
busy signal.

Enter the number of the external
subscriber.
You will hear the calling signal. With a busy
subscriber you should call again later.
External subscriber: Pick up handset. You are connected to the external subscriber.
Have your call.
Hang up End of call.
External call with targeted external line access
If you wish to define the external line to be used for your external call instead of the
code number

for external line access you will have to use the code number

for
external line 1or

for external line 2.
Example: Telephone 22 wants to use external line 1 for the external call.
Telephone 22:
Pick up handset.
Internal dialling signal can be heard.

Get access to an external line 1. If the external line is available you will hear the
external dialling signal. If the external line is
busy you will hear the busy signal of your
telephone system. In this case try again.
In case your extension is not authorised to
access an external line you will also hear the
busy signal.

Enter the number of the external
subscriber.
You will hear the calling signal. With a busy
subscriber you should call again later.
External subscriber: Pick up handset. You are connected to the external subscriber.
Have your call.
Hang up End of call.
Operation
14
Query
Incoming or outgoing calls can be put on hold in order to make a query.
Example: Subscriber 22 has an external call and wants to ask subscriber 23
something.
Telephone 22: Notify your
conversational partner of the internal
query
Have your external call
Initiate query. Internal dialling signal can be heard.
Your conversational partner will be held in the
telephone system and will hear music on hold.

Dial number. You will hear the calling signal.
In case names have been configured for the
extensions NAME-CLIP capable telephones
will show the callers name, if not only the
callers number will be displayed.
With a busy subscriber you hear the busy
signal. Hang up then. You will receive a call
back and upon picking up the handset you are
again connected to your conversational
partner.
Or you can terminate the query by pressing
the
key.
Telephone 23: Pick up handset. Have your call.

Terminate query. Have your external call.
Hang up all handsets. End of call.
Query with call forwarding
Forwarding external calls with notification
Incoming or outgoing calls can be put on hold and be forwarded to another
subscriber.
Example: Subscriber 22 has a external call and wants to connect his conversational
partner to subscriber 23 with notification.
Telephone 22: Notify your
conversational partner on the
forwarding.
Have your external call.
Operation
15
Initiate query. You will hear the calling signal.
Your conversational partner will be held in the
telephone system and will hear music on hold.

Dial number. You will hear the calling signal and the telephone
you called will ring.
In case names have been configured for the
extensions NAME-CLIP capable telephones will
show the callers name, if not only the callers
number will be displayed.
With a busy subscriber you hear the busy signal.
Hang up then. You will receive a call back and
upon picking up the handset you are again
connected to your conversational partner.
Or you can terminate the query by pressing the
key.
Telephone 23: Pick up handset. Notify forwarding.
Telephone 22: Hang up. Conversational partner on hold will be connected
with Telephone 23. Have your external call.
Hang up. End of call.
Forwarding external calls without notification
Incoming or outgoing calls can be put on hold and be forwarded to another
subscriber without notification.
Example: Subscriber 22 has a external call and wants to connect his conversational
partner to subscriber 23 without notification.
Telephone 22: Notify your
conversational partner on the
forwarding.
Have your external call.
Initiate query. You will hear the internal calling signal.
Your conversational partner will be held in the
telephone system and will hear music on hold

Dial number. You will hear the calling signal and the
telephone you called will ring.
Telephone 22: Hang up. Telephone 23 will be called. If the call will not
be taken within 45 seconds a call back to the
forwarding telephone 22 will be carried out.
The same happens if telephone 23 is busy.
Operation
16
Telephone 23: Pick up handset. Conversational partner on hold will be
connected with telephone 23. Have your
external call.
Hang up. End of call.
Forwarding external calls to external subscribers
If you have two external lines available and you are authorised to perform an external
forwarding you can put incoming or outgoing external calls on hold and forward them
to another external subscriber with notification.
Example: Subscriber 22 has an external call and wants to forward his conversational
partner to the external subscriber 4711.
Telephone 22: Notify your
conversational partner on the
forwarding.
Have your external call.
Initiate query. You will hear the internal calling signal.
Your conversational partner will be held in the
telephone system and will hear music on hold.

Occupy second external line. With an external line available you will hear the
external dialling signal.
If the external line is busy you will hear the
busy signal of the telephone system. In this
case take your call back by pressing the R key
twice and try again later.

Call external subscriber. You hear the calling signal. The external
subscriber will be called.
The external subscriber takes the call. Notify him/her on the forwarding.

Party from external line 1 is connected
with party from external line 2.
You hear the busy signal of the telephone
system.
Telephone 22: Hang up. The telephone system monitors both external
lines and terminates the calls according to the
settings made via the PC configuration
software.
Disconnecting special external calls
External calls that have been set up by the telephone system (pharmacy function,
external call deflection) can be disconnected manually from telephone 21.
Operation
17
Pick up handset of telephone 21. You will hear the internal dialling signal

Dial code number

. The external call will be disconnected. You will
hear the acknowledge signal.
Hang up. Disconnection is done.
Summary of functions with an external line on hold
Key sequence
Function Requirement
Initiate query. External line on hold
Y
our conversational partner will hear music on
hold
Internal subscriber will hear dialling signal of
the telephone system

Active external line will be disconnected. Conversational will hear busy signal.

Toggles between both external lines. One external line active, the other one on hold.

Initiate call forwarding followed by
dialling the target number of the internal
subscriber.
One external line active, the other one on hold.

Connecting two external subscribers Both external lines on hold.

Occupy second external line One external line on hold.
Operation
18
Subscriber features
Following table describes the features available to you as subscriber at your
extension.
Pick up a call
If you hear another telephone ringing you can pick up that call with your own
telephone. Picking up a call is available for both, internal call and external call.
Example: You hear another telephone ringing and you wish to take that call.
Pick up handset. You will hear the internal calling signal

Dial code number

for pick up You will be connected with the caller.
Requirement: Your extension must have authorisation for pick up. This is set via
the PC configuration software.
Call deflection
With call deflection you are able to redirect calls from your telephone to another
telephone within the telephone system. Then incoming calls will be no longer
signalled at your telephone but will be forwarded directly to the defined target
telephone. You still can place calls. But you will hear the special dialling tone
which reminds you of the activated call deflection.
Activate call deflection
Example: You wish to redirect all your calls to telephone 23.
Pick up handset. You will hear the internal dialling signal

Dial code number

. By dialling code number 8 followed by the
target number call deflection will be activated.
You will hear the special dialling signal.
Hang up. Call deflection to telephone 23 has been
activated.
Call deflection to telephone 21: Code number 821 Call deflection to telephone 22: Code number 822
Call deflection to telephone 23: Code number 823 Call deflection to telephone 24: Code number 824
Operation
19
Call deflection to telephone 25: Code number 825 Call deflection to telephone 26: Code number 826
Call deflection to telephone 27: Code number 827 Call deflection to telephone 28: Code number 828
Deactivate call deflection
Pick up handset. You will hear the internal special dialling signal

Dial code number

. By dialling code number 80 call deflection will
be deactivated.
You will hear the internal dialling signal.
Hang up. Call deflection has been deactivated.
Call deflections to external targets can be programmed and activated via the PC
configuration software.
Reserve an external line
In case the external line is busy after dialling the external line code number you
can make a reservation for that line by dialling the code number 90. As soon as
that line is no longer busy you will be notified by a call back. By picking up the
handset you will automatically get that line.
Pick up handset. You will hear the internal calling signal

Dial code number

for external line
access.
The external line is busy. You will hear the
busy signal.

Dial code number

for reserving
the external line.
You hear the acknowledge signal.
If you do not hear that signal that line already
had been reserved by another subscriber.
There can only be one reservation at a time.
Hang up. The external line has been reserved.
The external line is no longer busy. You get a call back. Your telephone rings.
Pick up handset. Your telephone is connected with the external
line. You hear the external dialling signal.
Dial the number you wish to dial. As you have already been connected with the
external line you do not need to dial the
corresponding code number.
Operation
20
Speed dialling
With speed dialling external numbers saved to the central telephone book can be
dialled on the external line automatically. Frequently used telephone numbers so
can be used comfortably by all subscribers. Programming and maintenance of the
central telephone book is made via the PC configuration software. Up to 100
entries can be saved. Each entry is assigned with a speed dial number between

and

, the name of the target subscriber and his/her telephone
number.
In case an incoming number will be transferred via CLIP the telephones system will
verify this number if there is a match with the telephone book. In case the result is
true the name of the caller from the telephone book will be sent via NAMECLIP.
Telephones supporting this function will then show the callers number in plain
letters.
Those 3-digit speed dial numbers can be dialled from each authorised extension.
The telephones system then will dial the corresponding subscriber and make the
connection.
Speed dialling will be carried out by key sequences

-

.
A completion with more digits is possible. If e.g. you have a company's prefix
number saved to your speed dial list and you want to call the subscriber with the
company extension 15, you can enter the sequence

where

is the
stands for the company's prefix number including area and country code, when
applicable. Speed dialling will be carried out without dialling the code number for
external line access.
The speed dial list can be edited and printed out via the telephone book function in
the PC configuration software.
Call completion on busy subscriber (internal)
With an busy internal subscriber the connection will automatically be made as
soon as the internal subscriber has hung up. The caller will have to activate this
automatic call back. You need to dial the code number  and then hang up. As
soon as the internal subscriber has hung up a call back to the caller will be
initiated. In case the handset is being picked up the internal subscriber will be
called without any additional dialling. Then the automatic connection procedure
will be finalised.
Operation
21
Example: Telephone 21 wants to talk with telephone 22. Telephone 22 is busy.
Telephone 21 activates call completion on busy subscriber.
Telephone 21: Pick up handset. You will hear the internal calling signal.

Dial internal telephone number. Telephone 22 is busy. You hear the busy
signal.

Activate call completion on busy
subscriber.
You hear the acknowledge signal.
Telephone 21: Hang up. Wait for call back
Telephone22: Hang up. End of call.
Telephone 21: Pick up handset. Telephone 21 receives a call back from
telephone 22.
Cal to telephone 22 automatically being
placed
Telephone 22 rings. You hear the calling
signal.
Telephone 22: Pick up handset. You are connected with the internal
subscriber. Have your call.
Hang up. End of call.
Signal call waiting
During a telephone call incoming external calls or the ringing of the door bell (with
door module TSM1) can be signalled by sending a call waiting tone.
Call waiting signal during an internal call
The call waiting signal has the same tone sequence as the external call or door
bell ringing.
Call waiting signal during an external call
The call waiting signal is a single tone which only occurs once per waiting call with
a duration of approximately 1 second.
The call waiting signal function can be activated/deactivated individually for every
subscriber.
Operation
22
Hold
External calls can be put on hold in your telephone system. The hold function will
be initiated and terminated by pressing the

key. Your conversational partner will
hear music while he/she is on hold.
In case you hang up while there still is a call on hold up to 45 seconds a call back
will be carried out. In case the call is not being picked up again the telephone
system will disconnect the caller on hold after those 45 seconds.
Conference (internal)
To an existing internal telephone connection additional parties can be added to
have an internal conference. The door intercom system, however, can not take
part in such a conference. The initiator of the call can add one additional
subscriber. Due to the private nature of the conference no external subscriber can
join it.
Example: Two internal subscriber 22 and 23 have a call and want to consult a third
subscriber 25 in conference.

Dial internal number

. Telephone 25 is being called (max. 20
seconds). Subscribers22 and 23 hear the
calling signal. In case telephone 25 is busy
you will hear the busy signal for 3 seconds.
Telephone 25: Pick up handset. The connection between all conference
participants will be set up.
Hang up. To leave the conference just hang up. The
subscribers left can continue their call.
Switch off tone dialling temporary
With internal connections tone dialling detection is active. The detection by the
telephone system of DTMF (dual tone multiple frequency) signals generated by the
telephones can temporarily be deactivated. This can make sense and is necessary
if e.g. you would like to remote access an answering machine or you wish to send
DTMF signals as data. Tone dialling detection can be switched off by pressing the
key during an internal call.
Operation
23
Person call / urgency call
The telephone system provides you with the option to call all extensions
simultaneously with an individual ringing signal. Telephones with a standard
ringing signal will play back the ringing signal in the same rhythm is will be turned
on and off. There are seven individual call rhythms available for person or urgency
calls which can be dialled via the code numbers 71 through 77. In case the
subscribers shall be assigned with an individual person call by using this individual
call rhythm this particular person can be addressed. After dialling that person's
person call code number alls telephones will ring with this individual rhythm. Once
that subscriber recognizes his/her individual person call he/she can pick up that
call at any extension and will be connected to the caller without any delay.
Via the PC configuration telephones that shall be enabled to place or receive
person or emergency calls can be selected and programmed accordingly.
Table of person call signal sequences
Person call code
number
Tone sequence

_-----_--__-----_--_ ... Long, 1 time short ...

_-----_--_--__-----_--_ ... Long, 2 times short ...

_-----_--_--_--__-----_--_ ... Long, 3 times short ...

_-----_--_--_--_--_ _-----_--_... Long, 4 times short ...

_-----_--_--_--_--_--__-----_--_ ... Long, 5 times short ...

_-----_--_--_--_--_--_--__-----_--_ ... Long, 6 times short ...

_-----_--_--_--_--_--_--_--_--_--_ ... Long, short, short, short, ...
Example: Internal subscriber 22 tries to contact subscriber assigned with person
call signal with code number 73.
Telephone 22: Pick up handset. You will hear the internal calling signal.

Dial person call code number

. All telephones with person call function
activated will ring in call rhythm 73.
Operation
24
Pick up handset of one of the ringing
telephones.
You are connected to the internal subscriber.
Have your call.
Person calls / urgency calls can also be used to forward external calls with
notification.
Call groups
Internal extensions can be put together to any call group and so can be reached
under the same single telephone number. There are four different call groups
available. One extension can be member of one or more call groups. The door
intercom system, however, cannot be a member of a call group.
When the call group number is being dialled all subscribers of that group that are not
busy at the time. Only those telephones that were set to 'do not disturb' will not ring.
An external call deflection will not be carried out.
The telephone numbers of the call groups are
Call group 1

Call group 2

Call group 3

Call group 4

Example:
The telephone system is being used in a sales office. Call group 1 is assigned tot
the sales team with the extensions 23, 24, and 28.
You wish to talk to somebody from the sales team.
Pick up handset You will hear the internal calling signal.

Dial telephone number

of call group 1
You hear the calling signal. The telephones
pf the call group are ringing.
One subscriber in the call
group takes the call.
The connection will be made. Have your call.
Hang up End of call
Call groups can also be used to forward external calls with notification.
Operation
25
Do not disturb
Every extension can be programmed in such a way that the telephone will not ring
on incoming calls (do not disturb). This function can be activated at your
telephone by dialling the code number

. You can still place calls yourself.
With help of the PC configuration software you can grant or deny authorisation to
activate this function individually for each subscriber.
Activate 'do not disturb'
Pick up handset. You will hear the internal calling signal

Dial

for 'do not disturb'. You will hear a fast dialling signal as
acknowledge.
Hang up. The telephone will no longer ring with
incoming calls (external calls, internal calls,
person calls, door bell calls). The caller will
here the calling signal.
Deactivate 'do not disturb'
Pick up handset. You will hear the internal calling signal

Dial

to deactivate 'do not disturb'.
.
You will hear the standard dialling signal
again.
Hang up. The telephone will now ring again when
somebody calls you.
Room monitoring
The telephone system provides you with the option to acoustically monitor a room,
i.e. the vicinity of an extension telephone. In order to be able to do this place this
telephone in the room you wish to monitor, pick up the handset and put it down
beside the telephone and dial the code number

. The handsets microphone
should point in the direction you wish to monitor. Now you can call this telephone
from every authorised extension and list to what happens in that room.
The 'room monitoring' function can only be carried out from an internal extension.
Example: Telephone 23 is in the nursery and shall be activated for monitoring. Telephone 21 shall be the
'receiver'.
Operation
26
Prepare target telephone for room monitoring
Telephone 23: Pick up handset. You will hear the internal calling signal

Dial code number

to prepare room
monitoring.
You hear an acknowledge signal.
Place the handset beside the telephone
so that the microphone opening points
in the direction you want to monitor.
Telephone is read for room monitoring.
The room monitoring function can be deactivated at the target telephone simply by
hanging up. Then the telephone will resume its normal operation.
Carry out room monitoring
Telephone 21:Pick up handset. You will hear the internal calling signal

Dial telephone number 23 Connection to the room monitoring telephone
will be made without any sound. All sounds to
be heard in that room will be transferred.
Telephone 21: Hang up. Connection to the target telephone will be
terminated without any sound. The connection
can be re-established from any other
authorised telephone at any time.
Via the PC configuration connecting with a room monitoring telephone can be
authorised or denied for each subscriber individually.
The fax switch
External line 1 of your telephone system can be operated with fax switch function
to separate voice calls and fax messages in order to forward them to the desired
target.
Operation principle
To determine whether a message is a fax or a voice message the fax signal (CNG)
sent by a fax machine will be analysed. In order to be able to do this with every call
on external line 1 the call will be taken and the system will then wait up to 5
seconds for the CNG signal. If such a signal is detected the call will be forwarded
to your fax machine. As soon as the fax machine answers the connection will be
made and the fax transfer will start.
Operation
27
If no CNG signal was detected a standard voice call will be assumed. The call will
then be forwarded to those telephones configured as receiving telephones for
incoming external calls. The telephone system will try for up to 55 seconds to set
up a connection to an internal subscriber. At the same time the caller will hear a
calling signal generated and sent by the telephone system.
In case an incoming fax had been taken by a telephone this 'call' should be
forwarded to the fax machine at port 4.
With your telephone system 2/8 USB the fax switch will only work with the first
external line.
The fax machine must be connected to port 4 and has to be ready to receive a fax
after 1 or 2 ringing signals.
The fax switch will turn off after 3 unsuccessful attempts. Attempts are treated as
unsuccessful when they were not taken by the fax machine, e.g. when there
is no more paper in the machine.
In case the fax machine busies port 4, e.g. due to an internal call, no fax can be
forwarded. Incoming calls on external line 1 in this case remain unanswered
until the fax machine will release port 4 again.
For sending a fax message code number

for external line access will have to be
dialled or the automatic external line access will have to be programmed for
that port.
The fax switch function can be activated or deactivated from every telephone.
Activate fax switch
1. Pick up handset You will hear the internal calling signal.

2. Dial code number

. You hear the acknowledge signal.
3. Hang up. The fax switch is activated the LED FAX is on.
Deactivate fax switch
1. Pick up handset You will hear the internal calling signal.

2. Dial code number

. You hear the acknowledge signal.
3. Hang up. The fax switch is deactivated the LED FAX is
off.
Only for Switzerland:
Configuration and settings
29
Configuration and settings
This chapter addresses the installer and user of the telephone system. Settings
and configuration options are described with which the telephone system can
be adapted to the individual operation environment and the requirements
needed.
PC configuration software
Easy, comfortable, and well arranged is the configuration via PC. The
configuration software on the CD that came along with your telephone system
was written for the operating systems WIN2000, XP, and VISTA 32 Bit which -
apart form the configuration - can also be used for setting up and editing the
telephone book. Configuration data and telephone book can be saved to a file
so that they are available again in case of any problems such as accidentally
deleting anything. You also have the option to print out the configuration data
and/or the telephone book for documenting purposes.
Installation of the PC configuration software
When installing the PC configuration software you should proceed as follows:
Put the CD-ROM Configuration Software in your CD/DVD drive.
The CD should start automatically. But you can also go to the root
directory of the CD and start the programme Setup32.exe
manually.
You will see the start window with its language selection.
Select the language you need and click on 'Next'. In the following
we will discuss the selection 'English'.
You will see the product selection table.
In the upper pane activate the radio button 'telephone systems /
system telephones'
In the lower pane activate the control box tiptel 2/8 USB.
Click on the button Install.
The installation will start. Follow the directions. For setting up the USB interface
after the successful installation please leave the CD-ROM in your drive.
Configuration and settings
30
Setting up the USB interface
Connect the telephone system with one of your PC's USB ports by using the
USB cable that came along with your telephone system and power up your
telephone system then. You will see a prompt asking you to install a USB
driver. This driver can be found on the CD-ROM Configuration Software, path
D:\Driver\2-8 USB\USB.
After successful installation you can download, edit, and upload again the
settings and the telephone book from your telephone system by using the PC
configuration software. Presentation and functions are mainly self-explaining. If
need you can press the function key F1 to get help to the individual topics.
Configuration and settings
31
In addition to the functions you can configure via the programming telephone
you can configure the following features via the PC configuration:
Authorisation speed dial
Authorisation 'do not disturb'
Authorisation 'pick up'
Authorisation 'person call'
Authorisation 'room monitoring'
Call deflection external
Names for extensions
Priority of external lines
Authorisation forwarding external/external
Selection of ringing signals
Definition of call groups
Time control
Telephone book
Firmware update
External cal deflection
Connection monitoring
Pharmacy function
The programming telephone
The basic functions of the telephone system can be programmed without the
help of a PC via a telephone. The so called programming telephone has to be
used for this. Due to the fact that the programming is carried out by dialling
digits it is recommended to use a telephone with a display. So you can verify
the digits you entered and avoid typing errors. It can also be helpful to write
down the digit sequences for the settings you wish to programme. This makes
the input easier and will also provide you with some documentation on your
settings.
Telephone 21 at port 1 is the programming telephone with which the
configurations and settings we refer to in the following can be carried out. By
dialling the code number

you will get to the programming level and
by dialling additional digits you can carry out a variety of configurations.
Configuration and settings
32
Several sequences of digits can be entered in a row.
Successful inputs will be acknowledged by a continuous acknowledge signal.
In case of an incorrect input an interrupted error signal is heard. the
programming level will automatically be left 30 seconds after dialling the last
digit or by simply hanging up. The configuration will be saved permanently to a
non volatile memory. After a power line failure the configuration will still be
there. Only the clock will have to be set again.
External line authorisation
The telephone system supports three different types of authorisation here.
Full external line authorisation
You can take external calls and you can dial via the external line.
- The access to an external line is on.
- The signalling of external calls is on.
Semi external line authorisation
You can take external calls. But you cannot dial via the external
line. Upon dialling the code number 0 for external line access you
will hear the busy signal.
- The access to an external line is off.
- The signalling of external calls is on.
No external line authorisation
You cannot take external calls. You cannot dial via the external
line.
- The access to an external line is off.
- The signalling of external calls is off.
In the factory default setting all telephones have full external line authorisation.
Setting up external line access
The external line access entitles the subscriber to dial telephones numbers via
the external line, i.e. to place outgoing calls. The external line access can
independently set up for both external lines for every telephone individually.
Programming can be carried out via telephone 21 according to the table below.
In the factory default settings external line access in on for all telephones.
Configuration and settings
33
The telephone system has been designed for use with 2 external lines. In case
you are only using one external line it is strongly recommended to disable
access to the second external line which is not in use.
Activate/deactivate external line access
Example: Access to external line 1 for telephone 23 shall be deactivated.
1. Telephone 21:Pick up handset You will hear the internal calling signal.

2. Dial code number

. Programming level is on. You hear the
acknowledge signal

3. Dial code number

to
deactivate access to external line 1 for
telephone 23.
You hear the acknowledge signal. Telephone
23 has no longer access for outgoing calls to
external line 1. When dialling
for external
line access telephone 23 will get external line
2.
4. Hang up. Programming is done.
Telephone 21 22 23 24 25 26 27 28 all
Ext. line access
Ext. line 1 on
211 212 213 214 215 216 217 218 210
Ext. line access
Ext. line 1 off
221 222 223 224 225 226 227 228 220
Ext. line access
Ext. line 2 on
231 232 233 234 235 236 237 238 230
Ext. line access
Ext. line 2 off
241 242 243 244 245 246 247 248 240
Setting external call signalling
Incoming external calls will be signalled in the programmed ringing rhythm.
This signalling can individually be activated or deactivated for every telephone.
Programming can be carried out via telephone 21 according to the table below.
In the factory default settings external call signalling is activated for both
external lines and for all telephones.
Configuration and settings
34
Activate/deactivate external call signalling
Example: External call signalling of external line 1 shall be deactivated for
telephone 23.
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate programming level. You hear the
acknowledge signal.

3. Dial code number

to
deactivate external call signalling from
external line 1 for telephone 23.
You heart the acknowledge signal. An
incoming external call on line 1 will no longer
be signalled at telephone 23. With the function
'pick up call' or by forwarding an external call
still can be taken.
4. Hang up. Programming is done.
Telephone 21 22 23 24 25 26 27 28 all
Ext. line signalling
Ext. line 1 on
311 312 313 314 315 316 317 318 310
Ext. line signalling
Ext. line 1 off
321 322 323 324 325 326 327 328 320
Ext. line signalling
Ext. line 2 on
331 332 333 334 335 336 337 338 330
Ext. line signalling
Ext. line 2 off
341 342 343 344 345 346 347 348 340
Call forwarding with external calls
With your programming telephone a standard call forwarding can be
programmed. In case a more sophisticated call forwarding is needed you can
use the PC configuration software to do this. With call forwarding on an
external call first telephones 21 and 22 will ring. After 15 seconds also
telephones 23 through 28 will ring. This enable you to take a call with
telephone 21 or 22 before another subscriber will be bothered by that call.
Configuration and settings
35
Activate call forwarding
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

to activate the
call forwarding.
You hear the acknowledge signal.
Call forwarding has been activated. External
calls will be signalled at telephone 23 through
28 not before 15 seconds are over.
4. Hang up. Programming is done.
Deactivate call forwarding
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal

3. Dial code number

to deactivate
call forwarding.
You hear the acknowledge signal.
Call forwarding has been deactivated. External
calls will be signalled at all authorised
extensions simultaneously.
4. Hang up. Programming is done.
Activate automatic external line access
When automatic external line access has been activated and the handset is
being picked up you will get an external line immediately. By pressing the
button you will return to internal.
Automatic external line access can be set up for every telephone individually.
Programming can be carried out via telephone 21 according to the table below.
In the factory default settings automatic external line access is deactivated for
all telephones.
Example: Automatic external line access shall be activated for telephone 24.
1. Telephone 21: Pick up handset You will hear the internal calling signal.
Configuration and settings
36

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

to activate
automatic external line access for
telephone 24.
You hear the acknowledge signal. Telephone
24 now has automatic external line access.
4. Hang up. Programming is done.
Once the handset of telephones 24 is being picked up this telephone will
automatically be assigned with an external line. You hear the external dialling
signal and you can start dialling without the need to dial the code number 0 for
external line access first.
Telephone 21 22 23 24 25 26 27 28 all
Automatic external
line access on
371 372 373 374 375 376 377 378 370
Automatic external
line access off
387 382 383 384 385 386 387 388 380
Set music on hold
When an external line is on hold the subscriber will hear a piece of music. This
piece of music you can activate or deactivate individually for each of the two
external lines. Programming can be carried out via telephone 21 according to
the table below. In the factory default settings music on hold is on.
Example: Deactivate music on hold for external line 2.
Activate/deactivate Music on hold
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

to
deactivate music on hold on external line
2.
You hear the acknowledge signal. Music on
hold on external line in deactivated.
4. Hang up. Programming is done.
Configuration and settings
38
Example: Activate blocked numbers for telephone 24
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

to
activate blocked numbers for telephone
24.
You hear the acknowledge signal. Blocked
numbers are activated for telephone 24.
4. Hang up. Programming is done.
Telephone 21 22 23 24 25 26 27 28 all
Blocked numbers on
8111 8112 8113 8114 8115 8116 8117 8118 8110
Blocked numbers off
8101 8102 8103 8104 8105 8106 8107 8108 8100
Activate/deactivate authorisation for long distance calls
The dial lock for long distance calls blocks all numbers starting with a zero (0).
It can be activated/deactivated for every telephone individually. Die
Programming can be carried out via telephone 21 according to the table below.
In the factory default settings dial lock for long distance calls is off.
Example: Activate dial lock for long distance calls for telephone 24
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.
Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

to
activate dial lock for long distance calls
for telephone 24.
You hear the acknowledge signal. Dial lock for
long distance calls for telephone 24 is
activated.
4. Hang up. Programming is done.
Telephone 21 22 23 24 25 26 27 28 all
Configuration and settings
40
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

Enter code number for entry of blocked
number.

4. Dial code number

for memory
index 05
For every blocked number a memory index
number between 01 and 20 has to be used. In
case one location will be re-used the old
blocked number will be overwritten.
5. Hang up. Blocked number on location 05 has been
deleted.
You will be called back. The index number of
the deleted entry will be shown on the display.
6. Telephone 21: Pick up handset You hear the acknowledge signal. For more
entries proceed as described under item 3
7. Hang up. Programming is done.
Enter exception numbers
Exception numbers can be entered via the programming telephone 21. A
DTMF telephone with CLIP function is recommended. For confirmation the
number will be shown on the display. 16 exception numbers with up to 17
digits each can be entered. For every entry there is a separate memory index
number from 01 to 16.
Enter exception numbers
Example: 0190 12345 shall be entered as exception number on memory index
number 01.
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

Enter code number for entering exception
number.

4. Dial code number

for
memory index number
For every exception number a memory index
number between 01 and 20 has to be used. In
case one location will be re-used the old
blocked number will be overwritten.
Configuration and settings
41

5. Dial digits

of exception number
The exception numbers can be digits 1,2..., *,
and #. The maximum number of digits is 17.
Further digits will be ignored.
6. Hang up. Entering the exception number is done. You
will be called back. The exception number
together with its memory index number will be
shown on the display.
7. Telephone 21: Pick up handset You hear the acknowledge signal. For more
entries proceed as described under item 3
8. Hang up. Programming is done.
Delete exception numbers
Example: Exception number on memory index number 05 shall be deleted.
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

Dial code number for entering exception
number.

4. Dial code number

for memory
index number 05
For every exception number a memory index
number between 01 and 20 has to be used. In
case one location will be re-used the old
blocked number will be overwritten..
5. Hang up. Exception number on memory index number
05 has been deleted.
You will be called back. The deleted numbers
index number will be shown on the LCD.
6. Telephone 21: Pick up handset You hear the acknowledge signal. For more
entries proceed as described under item 3
7. Hang up. Programming is done.
Configuration and settings
42
Table of pre-set exception numbers
Memory index
number
D A CH NL B F int Notes
13
3651
14
30
15
0800
16
07024
5245
08365
91212
17
110 112 117 112 100 112 112 cannot be deleted
18
112 122 118 101 15 cannot be deleted
19
133 144 112 17 cannot be deleted
20
144 18 cannot be deleted
Activate/deactivate caller ID (CLIP)
Transfer of CLIP information can be activated/deactivated for every telephone
individually. Programming can be carried out via telephone 21 according to the
table below. In the factory default settings CLIP information for all telephones is
on.
Example: Deactivate CLIP transfer for telephone 24
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

to
deactivate transfer of CLIP information to
telephone 24.
You will hear the acknowledge signal. From
now on no CLIP information will be transferred
to telephone 24.
4. Hang up. Programming is done.
Configuration and settings
43
Telephone 21 22 23 24 25 26 27 28 all
CLIP transfer on
351 352 353 354 355 356 357 358 350
CLIP transfer off
361 362 363 364 365 366 367 368 360
Set up call waiting signalling
To indicate that there is another caller while you are already having a call on
external line 1 or 2 you hear a call waiting signal, in case this function is
activated.
When there is a door module installed also the door bell will be indicated via a
call waiting signal, in case the function is activated.
Activate call waiting signal
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

to activate call
waiting
You will hear an acknowledge signal. While in
call state you will hear a call waiting signal in
case another external call come in and in case
your telephone is authorised to receive external
calls.
4. Hang up. Programming is done.
Deactivate call waiting signal
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

to deactivate
call waiting
You hear the acknowledge signal. With a
second external call or with the door bell
ringing you will not hear the call waiting signal.
4. Hang up. Programming is done.
Configuration and settings
44
SMS terminal unit support
Short messages (SMS)
Details on the service 'SMS in the fixed net'
SMS service allows sending short text messages to or receiving them from
other terminal units. Those messages will not be sent directly to the other
terminal unit, they will be transferred via the SMS service centre of your
telephone company. A message can be up to 160 characters in length. Q
requirement for using SMS caller ID (CLIP) support. The only ting you have to
do then is to subscribe to your SMS service centre.
In case you register with your telephone company for fixed net SMS (sending
and receiving) there are several options to send SMS test messages. Examples
are sending your test message to a fax machine or even to subscribers that do
not have an terminal unit that supports SMS. In this case the text message will
be read to the subscriber as a voice message. You can also have your SMS
transmission being confirmed once it has been received. For more details on
these and other functions please refer to information brochures of your
telephone company.
To enable you to receive or send short messages (SMS) you need a terminal
unit which supports SMS (e.g. tiptel easyDECT XL
2, 540 Office, 570 Office,
275). Also the following requirements have to be taken into account:
Configuration of your telephony connection
Please verify that the features 'Send Caller ID' and 'Show Caller ID' (CLIP going
and coming) are enabled. Please contact your telephone company to ask them
whether or not these features are available at your telephony connection.
Eventually you will also have to verify if 'Show Caller ID' (CLIP) has been
activated in your telephone system and that 'Send Caller ID' (CLIR) has not
been disabled. In particular it is mandatory that the telephone number your are
sending matches the one you are going to use to receive SMS messages.
Register/deregister at the SMS service centre
In order to be able to receive a fixed net SMS you will have to register your
SMS terminal device (e.g. telephone) with the SMS service of your telephone
company. In the whole of Germany, e.g. the SMS service centre of German
Telecom can be accessed via the telephone number '0193010'. The SMS
Configuration and settings
45
service centre of www.sms-im-festnetz.de can be accessed via '09003266900'
(SMS service centre 2).
The way how to register is nit the same with every provider. Please contact
your telephone company how this is done.
With the telephone company German Telecom e.g., the first registration is free
of charge*. You simply have to send an SMS with the message:
"ANMELD" to the telephone number 8888.
In return you will receive a registration confirmation from the SMS-Service of
German Telecom. Now you can be sure that sending as well as receiving SMS
messages will work with your terminal unit which supports SMS.
Sending "ANMELD" to the telephone number 8888 you can de-register your
particular telephone number. Future SMS messages sent to your telephone
number then would be read to you as voice messages.
*as of August 2006
Important notes:
In case you cannot get in contact with the service centre please verify whether
or not your telephone access is authorised to dial that number. The SMS centre
of German Telecom, e.g. cannot be reached from within networks of other
telephone companies.
Many telephone companies are also blocking the prefix 0900 so that you also
cannot reach the service centre of www.sms-im-festnetz.de. In this case please
contact your telephone company to have that prefix authorised (can be with
costs).
Configuration and settings
46
Receiving SMS
It is possible to set up one extension (one port) for an external line to receive
SMS messages. A terminal unit which supports SMS can then be operated at
this port in order to receive incoming SMS messages.
For each external line an individual SMS terminal device can be defined. It is
necessary to configure external line access and external line signalling for SMS
communication on this particular port. Deactivate call waiting signalling if there
is only one terminal unit with SMS functionality for both external lines. If you do
not deactivate the signalling you will lose SMS messages coming in on the
other line while the SMS terminal device is busy.
Defining the SMS port
Programming can be carried out via telephone 21 according to the table below.
In the factory default settings there is no SMS port defined.
Example: Configuration of telephone 21 for SMS communication on external line 1
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

to define
the SMS port for telephone 21.
You hear the acknowledge signal. Connection
for SMS communication has been set up.
For reliable SMS communication it is recommended to use the same external line
(= the same telephone number) for coming and going SMS messages. Please
make sure that only external line 1 will be used for coming and going connec-
tions. Following please find the assignment for telephone 21 as an example.

4. Dial code number

. Signalling for external line 1 on.
You hear the acknowledge signal..

5. Dial code number

. Signalling for external line 2 off.
You hear the acknowledge signal..

6. Dial code number

. External line access for line 1 on.
You hear the acknowledge signal..

7. Dial code number

. External line access for line 2 off.
You hear the acknowledge signal..
8. Hang up. Programming is done.
Configuration and settings
47
Deleting the defined SMS port
Example: Delete configuration of telephone 21 for SMS communication on
external line 1
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

. You hear the acknowledge signal..
SMS communication for external line 1 has
been deleted.
4. Hang up. Programming is done.
Telephone 21 22 23 24 25 26 27 28 off
SMS via line 1
391 392 393 394 395 396 397 398 390
SMS via line 2
301 302 303 304 305 306 307 308 300
Switching between day and night settings
Once settings have been programmed even with power line failure they will not
be deleted. The day/night programme gives you the option to create two
individual configuration sets and use the one you require: One configuration
with authorisations for day and another one for night operation.
In the default settings your configuration will be saved as day programme.
Switching between day and night settings
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

. You hear the acknowledge signal..
Night programme activated. LED
on.
You may programme settings for the features
listed below, which then can be accessed via
this dial code number.
Configuration and settings
48

4. Dial code number

. You hear the acknowledge signal..
Day programme activated. LED
off.
You may programme settings for the features
listed below, which then can be accessed via
this dial code number.
5. Hang up. Programming is done.
Following features can be affected by the day/night programmes:
External line signalling
External line authorisation
Dial lock for long distance calls (0...)
Dial lock for blocked numbers with exception numbers
Door opener authorisation
Door bell signalling authorisation
Direct access to door intercom system
Set door bell signalling
The telephone system in connection with the optional door line module (TSM1)
can signal your door bell at a telephone. This signalling can be
activated/deactivated individually for each telephone. When the door bell rings
while you are having a telephone call you will hear a call waiting signal
(provided that call waiting signalling has been activated).
Programming can be carried out via telephone 21 according to the table below.
In the factory default settings door bell signalling is activated for all telephones.
Activate/deactivate door bell signalling
Example: Deactivate door bell signalling for telephone 23.
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

.
Y
ou hear the acknowledge signal. Telephone 23
will not signal any door bell ringing.
4. Hang up. Programming is done.
Configuration and settings
49
Telephone 21 22 23 24 25 26 27 28 all
Door bell signalling on
591 592 593 594 595 596 597 598 590
Door bell signalling off
501 502 503 504 505 506 507 508 500
Set door opener authorisation
The door opener can be actuated from every telephone connected to the
telephone system in case the option door line module (TSM1) has been
installed on the printed circuit board. This authorisation can be
activated/deactivated individually for each telephone.
Programming can be carried out via telephone 21 according to the table below.
In the factory default settings door opener authorisation is activated for all
telephones.
Activate/deactivate door opener authorisation
Example: Deactivate door opener authorisation for telephone 23.
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

. You hear the acknowledge signal..
Telephone 23 has no door opener
authorisation. When dialling door opener code
number 6 the door opener will not be actuated.
4. Hang up. Programming is done.
Telephone 21 22 23 24 25 26 27 28 all
Door opener
authorisation on
491 492 493 494 495 496 497 498 490
Door opener
authorisation off
401 402 403 404 405 406 407 408 400
Configuration and settings
50
Set duration of door opener actuation
The duration of the door opener actuation can be programmed between 1 and
9 seconds. Programming can be carried out via telephone 21 according to the
table below. In the factory default settings this duration is programmed as 3
seconds.
Set duration
Example: The duration shall be set to 5 seconds.
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. Activate the programming level. You hear the
acknowledge signal.

3. Dial code number

. You hear the acknowledge signal..
By dialling the door opener code number 6 the
door opener will be actuated for 5 seconds.
4. Hang up. Programming is done.
Actuation duration 1s 2s 3s 4s 5s 6s 7s 8s 9s
61 62 63 64 65 66 67 68 69
Set direct access to door intercom system
Somebody rings the door bell. All authorised telephones will ring in the door
bell rhythm. If you pick up a telephone for which the direct access has been
activated you will immediately be connected with the door intercom system.
Dialling the code number 5 for accessing the door intercom system is not
necessary.
If you connect an answering machine as extension with direct access activated
you can e.g. have automatically messages being playing back to the visitor via
the door intercom system.
Attention: In order not to have the door answering machine take any external
calls, for this telephone external line signalling must be deactivated.
Configuration and settings
52
busy signal after the end of a call). Also it is not recommended to have a busy
signal being played back at a door intercom system.
Miscellaneous
Following you will find some basic settings which are independent from the
extensions in use.
Setting of time and date
The telephone system has its own internal clock with date and day of the week
information for time controlled day/night programme and CLIP transfer. The
clock will be automatically set when time and date will be transferred together
with the CLIP information by your telephony company. In case there is not such
transfer from your telephony company you can also set the clock manually by
using the configuration software on your PC or by using the programming
telephone.
Setting of time and date via the programming telephone

1. Programming telephone 21: Pick up
handset
2. Dial code number

.


3. Enter time and date in format
hhmmDDMMYYw
hh = hour, 2 digits (00 to 23)
mm = minutes, 2 digits (00 to 59)
DD = Tag, 2 digits (01 to 31)
MM = month, 2 digits (01 to 12)
YY = Year 2 digits (00 to 99)
w = day of the week 1 = Sunday, 2 =
Monday, . . . , 7 = Saturday
Example:
Monday, 28. April 2008 8:07
08072804082
4. Hang up The telephone will be called back
5. Pick up handset Your settings will be confirmed by an
acknowledge signal.
Configuration and settings
53
In case you only wish to update the clock simply hang up after entering the 4
digits for the time. After the call back you will hear the acknowledge signal. The
time has been updated.
Audio sample of music on hold
With an external line on hold the subscriber will hear a piece of music. For
testing purposes you can listen to that music on telephone 21 for 30 seconds.
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. You will hear music on hold for 30 seconds
3. Hang up. Stop test play back.
Restore factory default settings
All settings of the telephone system can be reset to factory default by dialling
the code number

at telephone 21. The telephone book, however,
will not be affected.
Restore default settings
1. Telephone 21: Pick up handset You will hear the internal calling signal.

2. Dial code number

. You hear the acknowledge signal..
The telephone system will be reset to factory
default. Call deflection and 'do not disturb' will
also be reset.
3. Hang up. Reset is done.
Planning and installation
54
Planning and installation
The chapter planning and installation describes the ports, helps you in choosing the
right location, the distribution of the extensions, and gives you information on what to
keep in mind during mounting and cable.
The telephone system has been designed for operation with two external lines. In
case only one external line is being used it is strongly recommended to block access
to the external line which is not being used.
Safety notes on the appropriate use of the telephone
system
Please make sure to observe the following notes with mounting, connecting and
operating the telephone system tiptel 2/8 USB:
This device has been tested and approved according to the
harmonised European Standard ETSI TS 203 021 and so is suitable for
connection to the public analogue telephone network.
This telephone system has been developed and manufactured in
compliance with the Standard "Safety of Information Technology
Equipment" (EN 60950). You may only connect equipment that also
complies with this or an equivalent Standard resp. Directive.
Installation has to be carried out professionally. Installation work
regarding mains voltage connection may only be performed by a
professional and authorised electrician. VDE 0100 has to be observed.
In case of any malfunction the AC adapter has to be removed from the
mains outlet and the external lines have to be disconnected. Install the
cables with care so that nobody can stumble across them.
Connect cables only to the appropriate jacks or connectors.
Connection cables may not be bent above a certain extent, they may
not be pulled or stressed mechanically.
Connection cables may only be installed inside of buildings.
Planning and installation
55
The telephone system may not be installed or operated in the following
environments:
Outdoors
In damp rooms (bathroom, shower, swimming bath, ...)
Near to explosives
In location with direct sunlight
With ambient temperatures below 0 °C or above 40 °C
With heave vibrations
In dusty environment
Environmental compatibility
With intended use their will be no contact with any material that can be hazardous to
your health. All plastic parts of this device consist of partly recycled granulate. Our
packing material does not contain any plastic. Only cardboard and paper is being
used that was manufactured using partly recycled material.
Planning and installation
56
Details on the connectors and ports of the telephone
system
Connector/port function Details
Port for external line
1
Western jack for external line 1 Plug in the western connector from the
cable for external line 1.
Port for external line
2
Western jack for external line 2 Plug in the western connector from the
cable for external line 2.
Multi-pin connector for installing
optional door module TSM1
Audio jack
for ext. music
on hold
Reset button
USB port
Western jacks to
connect terminal
units with RJ11
plugs directly.
To be used for
extensions 21
through 24
TAE jacks to con-
nect terminal units
with TAE plugs
directly. To be
used for exten-
sions 21- 24
(Germany only)
8 pairs of screw-
ing terminals for
connecting ex-
tensions 21
-
28
Jack ext.
line 1
Jack ext.
line 2
Planning and installation
57
16 pin screwing
terminal
Terminals for all 8 internal subscribers. Two screwing terminals for every
extension marked from 1 (for extension
21) through 8 (for extension 28).
4 western jacks RJ11 Western jacks for direct connection of
terminal units, e.g. telephones with
RJ11 cable connectors
Western jacks are an alternative for
extensions 21 through 24 instead of the
screwing terminals.
USB connector Connector for your PC to configure the
telephone system
Audio jack 3.5mm phone jack to connect to an
external source for music on hold.
You can connect both, mono or stereo
equipment.
Connector for
optional door module
TSM1
The door module TSM1 will be
connected directly to that connector
and so enables you to connect a 4 wire
door intercom system, a door bell, and
a door opener.
Reset button Press this button to reset the telephone
system, delete the configuration, or
start firmware update via the update
server.
Mounting the telephone system
It is recommended to proceed in the following order:
Choose the mounting location
Open the cabinet
Wall mount the telephone system
Install the cables for the wall outlets
Connect the terminal units
Connect the telephone system with the external lines
Connect the telephone system with mains power
Perform a functional test
Planning and installation
58
Tools and material needed
Hammer drill with 6 mm stone drill for wall mounting
In case you wish to use the screwing terminals:
Screwdrivers of different size
Wire cutter, cable stripper
Telephone installation cable (e.g. I-Y(ST)Y 2 x 2 x 0,6)
in needed
quantity and length
Telephone jacks/wall outlets
Miscellaneous mounting material for cables and telephone jacks
Define the mounting location
The telephone system can be either operated horizontally or vertically, mounted to a
wall.
Please consider the following requirements for the location:
All items listed in chapter 'Safety notes' (see page 54) on the intended
operation and use of the telephone system have to be observed.
Make sure that you are close to a mains power wall outlet.
Make sure that you are close to the connection access for the external
telephone lines from your telephone company.
Make sure to chose a central location regarding the planned locations
of your extensions.
Extensions close to the telephone system can be connected directly to the system by
using the system's western jacks. You should then use ports 1 through 4. Extensions
not that close to the system should be connected via separately installed cables
connected to the screwing terminals of the telephone system.
Opening the cabinet
In case you need to make use of the screwing terminals of the telephone system you
will have to open the cabinet first. You will also have to open the cabinet in case you
wish to install the optional door module TSM1.
Before opening the cabinet make sure to disconnect mains power and the external
telephone lines.
Planning and installation
59
This is how to open the cabinet:
At the indicated areas (1) insert a slot screwdriver (4 mm) or a similar tool as far as it
goes from bottom of the housing in the direction towards the top. Pull the screwdriver
towards you (2) which will slacken the snap mechanism and lift the cover towards the
back of the unit.
Wall mounting of the telephone system
Two rawlpugs and 2 screws are part of the scope of delivery. Please note that those
rawlpugs are only intended for use with a massive stone wall. For other types of wall
please use appropriate mounting material. For wall mounting there are two openings
on the bottom part of the cabinet. The distance between the two screws has to be
162 mm. Make sure there is enough room for installing the cables below the cabinet.
Mark the drilling holes levelled at a distance of 162 mm and at least with
a distance of 50 mm to the ceiling.
Drill the holes (6mm diameter) and then plug in the rawlplugs. Make
sure not to hit any wires in the wall when drilling!
Screw in the screw only to a certain extent, which is some 5 mm
distance between the bolt head and the wall.
"Hang up" the telephone system on the two screws with its mounting
brackets on the bottom part of the cabinet.
11
22
Planning and installation
61
Connecting terminal units
a) Terminal units that are not in the vicinity of the telephone system have to be
plugged into the telephone jacks or wall outlets that have been installed before.
b) Western jacks for the first extensions:
Please use one particular jack exclusively for each terminal device in the centre
of the jack array. Pinning of the jacks is in compliance with international
Standards, defining the two central wires as a/b. Please consult your telephone
dealer about such cables.
Please keep in mind that due to alternative connection options (screwing terminal or
western jack) unintentional parallel connection of terminal units cannot be ruled
out. Make sure that you only use one of these alternative connections methods
per terminal unit.
e.g. cordless phone
TAE jacks (Germany only)
e.g. comfort phone e.g. fax
Audio
USB 21 22 23 24
Western
j
acks
ext. 2 ext. 1
Planning and installation
62
Connecting the telephone system to the external telephone lines
Plug in the western plug of the external telephone line 1 in the corresponding western jack on
the right and the one for line 2 in the corresponding western jack on the left hand side. And then
connect those cable with the wall outlets connected to the telephone network of your telephone
company.
Connecting the telephone system to mains power
The telephone system has been designed for connection to mains power of
230V+6%/-10%, 50Hz. Use the system's AC adapter to connect it to mains power.
You will hear a short click and the LED "power" will light and indicate readiness for
operation.
Functional test
After installing all terminal units and cables it is recommended to perform a functional
test. Pick up one telephone after the other and listen for the dialling signal. Dial the
numbers of the other extensions and verify that they do ring. Also you should check
the voice connection. Dial
for external line access and check for the external line
dialling signal. In case you two external lines installed check the dialling signal with
both of them.
External line 2 External line 1
Planning and installation
63
PC connection
For configuration and/or telephone book management you will have to set up a
connection between the telephone system and a PC. For this please use the USB
cable that came along with your telephone system and connect one end to with a
USB port of your computer and the other end with the USB port of your telephone
system (Please see also page 30).
Installation when using a fax switch
If you wish to use the fax switch you will have to connect the fax machine to port
extension (port) 24. Make sure that connection is a fixed one.
Please note that the fax switch is only available for external line 1. This is why you
have to use the telephone number of external line 1 as your Fax number (please see
also page 26).
Indicating power line failure
In case of a power line failure telephone 21 is directly connected with external line 1.
The comfort telephone tiptel 272 can indicate power line failure via an LED. In order
e.g. cordless phone
TAE jacks (Germany only)
e.g. comfort phone
Fax at 24
Audio
USB 21 22 23 24
Western
j
acks
ext. 2 ext. 1
Planning and installation
64
to be able to do this the line reversal between connection to the external line and
connection to the telephone system will be analysed.
The power line failure indication is set up as follows:
Install the telephone system as describer in chapter "Mounting the telephone
system". The telephone system is in operation and connected to external line 1.
Install tiptel 272 at extension 21.
Set the MWI switch to position PR1 or PR2 whichever position results in
the LED lighting.
Simulate power line failure: Unplug the AC adapter.
LED stays on:
Interchange the wires at telephone extension (port) 21 to change the
polarity. After this the LED should be off. Proceed with "LED off".
LED off:
Set the MWI switch to position PR1 or PR2 whichever position results in
the LED lighting.
Restore power: Plug the AC adapter in again.
tiptel 272 now will indicate normal operation of your telephone system, the LED is off.
In case of a power line failure the LED goes on and so will inform you about the
situation.
Reset button
The reset button can be actuated from the system's connector side with a small tool
such as a screwdriver. The reset button can be used to initiate three different
functions.
Reset to factory default settings
Keep the reset button pushed while plugging in the AC adapter of your telephone
system.
the power LED will flash until you release the reset button. The telephone system will
restore factory default settings. The telephone book entries, however, will not be
affected.
Warm start
Push the reset button while in normal operation.
The telephone system will perform a warm start. All telephone calls will be
terminated. In case telephone 21 has been picked up it will be connected to external
line 1 directly.
Planning and installation
65
Firmware update via the update server
Push the reset button while in normal operation for 10 seconds.
The power LED starts flashing. Once you release the reset button the telephone
system will call the update server by using external line 1. The telephone number of
the server is pre-set but - if necessary - can be changed via the PC configuration
software's expert mode. LED L1 will go on and LED "Service" will indicate data
communication. The firmware update will take appr. 5 minutes. The firmware will be
transferred as modem signals and will be saved to a buffered RAM. Once the transfer
is completed all incoming data will be verified and in case of a positive result
transferred to the programme memory. All LEDs will go on and off again, one after
the other. As soon as the new firmware has been installed the telephone system will
re-start. After the re-start the Power LED will indicate readiness for operation.
Optional door module
The telephone system can be upgraded by the door module TSM1 that can be
installed within the system's cabinet. I can simply be plugged onto multi-pin
connector on the telephone system's printed circuit board. The door module provides
you with interfaces for a 4 wire door intercom system, a door bell, and a door opener.
The door intercom system as well as the door opener can be operated via internal
telephones connected to the telephone system. With the pharmacy function also an
external telephone (e.g. in another in another street or even another city/country) can
be called via the door bell.
Annex
66
Annex
Service
You have purchased a modern product from TIPTEL.COM GMBH BUSINESS
SOLUTIONS , developed and produced in Ratingen near Düsseldorf, Germany. Our
highly modern production facilities ensure a consistently high level of quality. This is
backed by our DIN EN ISO 9001 certification.
If, however, problems do occur, or you have questions on operating the device,
please contact your dealer. During the warranty period this dealer is your contact.
Tiptel.com GmbH Business Solutions has set up a special number for technical
support for specialist dealers to provide you with qualified assistance.
If your dealer cannot help you, you can also contact Tiptel.com GmbH Business
Solutions directly. Initial information can be obtained from our Internet pages listed
below in the support section under “FAQ – Frequently Asked Questions”. In addition,
you can reach the experienced staff in our Technical Support department by email,
fax or telephone at the times indicate
d
:
In Germany In Austria In Switzerland
www.tiptel.de
www.tiptel.at
service@tiptel.at
www.tiptel-online.ch
service@tiptel-online.ch
08.00 a.m. - 5.00 p.m. (Mo - Fr)
08.00 a.m. - 5.00 p.m. (Mo - Th)
Fr until 3.00 p.m.
08.00 a.m. - 5.00 p.m. (Mo - Fr)
Telephone 0900 100 - 84 78 35*
Vanity Tel. 0900 100 - TIPTEL*
*with costs
Telephone: 02236/677 464-0,
Telefax: 02236/677 464-21
Telephone 044 / 884 01 80
Telefax 044 / 843 13 23
Please consult your telephone company if you have any questions on your telephone
connection.
Annex
67
Warranty
Your contact for services included among the warranty obligations is the specialist
dealer from whom you bought the device.
Tiptel.com GmbH Business Solutions will grant a warranty of 2 years from the date of
handover for the material and for the manufacturing of the telephone system.
Initially, the purchaser shall have only the right to subsequent performance.
Subsequent performance entails either repair or the providing of an alternative
product. Exchanged devices or parts shall become the property of the specialist
dealer.
If subsequent performance is unsuccessful, the purchaser can request either a
reduction in the purchase price or withdrawal from the contract.
The purchaser must notify the dealer of any defects without delay. Proof of the claim
to warranty shall be furnished by standard proof of purchase (till receipt or invoice).
The claim to warranty shall expire if the purchaser or an unauthorised third party
tampers with the device. Damage caused by improper handling, operation, storage
or by force majeure or other external influences shall not be covered by the warranty.
The warranty shall not cover any consumables (e.g. batteries) or defects that only
slightly impair the value of serviceability.
Claims for damage caused by transport shall be asserted to the shipping company.
Notes on processing:
Repairs will only be carried out by Tiptel.com Service. With our 48 hour repair service
you will usually receive a repaired device or a replacement within 2 working days
plus the usual delivery period. If the device is repaired during the warranty period, the
warranty is not extended for the replaced parts or for the device. This warranty is not
transferable and shall expire if the device is sold to another party. It shall also expire if
anyone other than Tiptel.com Service staff tamper with the equipment or if the serial
number on the device is removed or rendered illegible. The device is marked with a
warranty seal. Please take care to ensure that this is not damaged. Otherwise this will
also render your warranty claim void.
The general terms of business of Tiptel.com GmbH Business Solutions, which form
an integral part of the contractual agreement with your dealer, also apply. In the case
of a complaint, the defective product is to be sent to Tiptel.com with a description of
the fault and proof of purchase. For warranty-related matters, please contact your
specialist dealer or send the equipment to the following address:
Annex
68
In Germany In Austria In Switzerland
Tiptel.com GmbH
Business Solutions Tiptel GmbH Tiptel AG
Service Service Service
Halskestraße 1 Ricoweg 30/B1 Bahnstrasse 46
D-40880 Ratingen A-2351 Wiener Neudorf CH-8105 Regensdorf
In warranty cases, the equipment will be returned at Tiptel.com GmbH Business
Solutions’ expense.
CE mark
This device meets the requirements of the EU directive: directive concerning radio
systems and telecommunications terminal devices and the mutual recognition of their
conformity.
Due to technical differences among the different countries, however, unlimited
warranty for unconditional operation with any telephone company cannot be granted.
Tiptel.com GmbH Business Solutions herewith declares that the equipment complies
with all the fundamental requirements of European Directive 1999/5/EC.
You can find further details on the compliance declaration at the following Internet
address:
http://www.tiptel.com
Environmental compatibility
No contact with substances harmful to human health can occur if the system is used
properly. This device does not contain any batteries. The synthetic materials used in
this device consist of partially recycled granulate. Our packaging does not contain
any synthetic materials. Only cardboard and paper from partially recycled material is
used.
Once your Tiptel product has reached the end of its life time, Tiptel.com GmbH will
take it back free of charge. The device will be dismantled properly and then
forwarded to a recycling company.
Annex
69
Trouble shooting guide
Problem Possible cause Solution
When picking up the handset you
do not hear the dialling signal.
The Power LED is off.
Power line outage. Check mains power, e.g. by
plugging in another electrical
device.
AC adapter not plugged in. Plug in AC adapter
When picking up the handset you
do not hear the dialling signal.
The Power LED is on.
Telephone connection not
working.
Check telephone connection and
installation.
Telephone defective. Try to use telephone with another
port.
Settings of telephone system
compromised
Remove AC adapter from mains
and then plug it in again.
You are not receiving any calls. 'Do not disturb' activated (check
if there is a fast dialling signal)
Deactivate 'Do not disturb' (see
page 25)
Call deflection activated (check if
there is a fast dialling signal)
Deactivate call deflection (see
page 19)
AC adapter not plugged in. Plug in AC adapter
Telephone connection not
working.
Check telephone connection and
installation.
Telephone defective. Try to use telephone with another
port.
Settings of telephone system
compromised
Remove AC adapter from mains
and then plug it in again.
You are not receiving any
external calls.
External line not connected. Plug telephone line into wall
outlet.
External line out of order. Plug a telephone directly into the
wall outlet of the external
telephone line and check external
line this way.
Or unplug the AC adapter and
then pick up the handset of
telephone 21. If you now hear
the external dialling signal the
external line is working properly.
Annex
70
External line signalling
deactivated.
Activate external line signalling
(see page 33)
Telephone system cannot be
programmed via programming
telephone 21.
Programming telephone set to
automatic external line access.
All code numbers will be sent to
the external line and not to your
telephone system.
After picking up the handset
press the
key to switch to
internal and then dial the code
numbers for the setting needed.
Please listen for the acknowledge
signal.
Dialling an external number gets
interrupted.
Long distance call authorisation
deactivated or digit blocking
activated.
Activate dialling authorisation
(see page 37)
You forgot your PC configuration
password.
Rest telephone system and enter
new configuration (see page 53)
Basic settings of the telephone system
Settings internal functions
Speed dial authorisation all on
'Do not disturb', selectable all on
'Do not disturb', activated all off
Pickup allowed all on
Make person call all on
Take person call all on
Call waiting all on
Room monitoring, calling allowed all off
CLIP transmission FSK all on
DTMF dialling during internal call all on
Deflections No deflections
Extension names empty
Settings external lines
External line1 going day/night all on/all on
External line2 going day/night all on/all on
External line1 incoming day/night all on/all on
External line1 incoming delayed day/night all on/all on
External line2 incoming day/night all on/all on
External line2 incoming delayed day/night all on/all on
Priority for external calls alternating ext. 1/ext. 2
Delay time 15 seconds
Forwarding authorisation external-external all off
Automatic external line access all off
Device connection (only a single device) empty
SMS connection external line 1 empty
SMS connection external line 2 empty
Fax switch off
Annex
71
CLIP correction on
Music on hold external line 1 on
Music on hold external line 2 on
Call signalling internal double calling signal 1
Call back signalling double calling signal 3
Calling signal from external line1 single calling signal 1
Calling signal from external line2 single calling signal 1
Receiving CLIP from external line 1 FSK
Receiving CLIP from external line 2 FSK
Call groups 1 - 4 empty
Time control empty
Ext. call deflection external line 1 off, telephone number
empty
Ext. call deflection external line 2 off, telephone number
empty
Connection monitoring
Time limit off
Busy signal on
Line reversal off
Language on
End signal (key #) on
Disconnect/take over on
Dialling monitoring
Long distance call authorisation day/night all on/all on
Blocked numbers activated day/night all off/all off
Blocked numbers leer
Exception numbers See page 37
Door line intercom system with door module
TSM1
Door opener authorisation day/night all on/all on
Door bell signalling day/night all on/all on
Direct door line access day/night all off/all off
Actuation time door opener 3s
Duration door bell 10s
Pharmacy function off
Technical data
72
Technical data
Analogue extension ports
Feeding voltage: 40 VDC
Feeding current: 24 mA +/- 10 %
Call signalling voltage: 48V +/- 15 %, 50 Hz
Frequency of audio signalling 425 or 440 Hz
Max. length of connection cable 0,6 mm: 450 m
Dialling mode (analogue): DTMF, pulse dialling
Number of internal connections 4
External lines
Immunity: 120VDC / 10s
Call impedance > 12 kOhm
Standard
ETSI TS 103 021
Main connection
Line voltage: 230 V +6 % / -10 %, 50 Hz
Power consumption: max. 15 VA
Power consumption in stand-by: < 6 W
Dimensions
L x W x H (mm): 260x240x50
Weight: appr.. 700g
Weight AC adapter: appr. 580g
Cabinet material: ABS
Flammability class: HB
Temperature range
Operation: 0°C to 40°C
Storage: - 20°C to 70°C
Miscellaneous
Telephone book entries 100
Telephone book memory buffer (with power line
outage)
:
>200h
USB interface: USB 1.0
Audio jack: 3.5mm phone jack
Input impedance: > 10 kOhm
Input voltage: max. 2 V
rms
Tiptel.com GmbH Business Solutions
Halskestraße 1
D - 40880 Ratingen
Tel.: 0900 100 – 84 78 35*
*(with costs)
V
anity Tel.: 0900 100 – TIPTEL*
Internet: www.tiptel.de
International:
Internet: www.tiptel.com
Tiptel GmbH
Ricoweg 30/B1
A - 2351 Wiener Neudorf
Tel.: 02236/677 464-0
Fax: 02236/677 464-22
E-mail: office@tiptel.at
Internet: www.tiptel.at
Tiptel AG
Bahnstrasse 46
CH - 8105 Regensdorf
Tel.: 044 - 884 01 80
Fax: 044 - 843 13 23
E-mail: tiptel@tiptel-online.ch
Internet: www.tiptel-online.ch
Tiptel B.V.
Camerastraat 2
NL – 1322 BC Almere
Tel.: 0900 – BELTIPTEL of
0900 2358478 (niet gratis)
Fax: 036 – 53 678 81
E-mail: info@tiptel.nl
Internet: www.tiptel.nl
Tiptel NV
Leuvensesteenweg 510 bus 4
B – 1930 Zaventem
Telefoon: 0903 99 333 (
1,12 Euro / min.)
Fax: 02 714 93 34
E-mail: tech@tiptel.be
Internet: www.tiptel.be
Tiptel s.a.r.l.
23, avenue René Duguay-Trouin
F – 78960 Voisins-Le-Bretonneux
Tél. : 01 / 39 44 63 30
Fax : 01 / 30 57 00 29
e-mail : support@tiptel.fr (EN) 07/2008
Internet : www.tiptel.fr EDV 4932322
72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tiptel 2-8 USB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Tiptel 2-8 USB

Tiptel 2-8 USB Bedienungsanleitung und Installationsanweisung - Deutsch - 88 seiten

Tiptel 2-8 USB Bedienungsanleitung - Holländisch - 88 seiten

Tiptel 2-8 USB Bedienungsanleitung und Installationsanweisung - Französisch - 88 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info