64
PC connection / TipKom (only tiptel 292/293)
Further information
On the disk, you will find a comprehensive software documentation giving you information on the
handling and the functionality. Just start the help function in the Tipkom software.
System requirements:
❍ 486/DX 66 or higher
❍ VGA monitor
❍ Sound card (optional)
❍ 4 MB RAM
❍ Mouse
❍ Windows
®
98 or higher
Windows is a registered trademark of the Microsoft Corporation.
Dialling via AT commands
Configuration of the PC interface: 9600, 8, N 1 without data flow control
Command:
❍ ATD telephone number <CR> Establish connection
❍ ATH <CR> Disconnect connection
❍ ATA<CR> Answer incoming call
PC connection / TipKom
The software "TipKom for Windows" from the scope of supply enhances the functional scope of
your tiptel 293/293, e. g. by the options:
❍ Loading and saving the call number memory
❍ Loading and saving the voice memory (only tiptel 293)
❍ Call data management
❍ Change of settings and others
❍ Dialling
❍ Loading a new operating software. You will always find the latest operating software version
and the latest PC software and TAPI driver in the Internet under www.tiptel.de.
Installation
❍ Connect your tiptel 292/293 to any serial interface of your PC. Should you only have a
free25-pin port free at your PC, you can use a customary adapter (9 pin <> 25 pin).
❍ Insert the TipKom disk and start the "SETUP" program. Then, just follow the given
instructions.
