628560
65
Zoom out
Zoom in
Vorherige Seite
1/136
Nächste Seite
Menu Settings
65
Note: The volume will be determined by the generated wave file. You may
want to adjust the volume by using the „Sound Recorder“. Note for re-
cording studios: The factory default music in the telephone system has
a sound level of -12 dBm.
Telephone system restart
Use this function to restart your telephone system manually.
Voicemail
Note: This menu is only available with a tiptel VCM-Module installed
Unassigned folder on the MMC
ICM and OGM from deleted subscribers or cancelled voice boxes are retained until
they are deleted manually. At this point you can assign the complete directory with all
of a subscriber's or services' ICM and OGM whose voice box is not yet switched on.
Please note that under some circumstances there is no access to ICM or certain
OGM if the subscriber or service does not use ICM or certain OGM.
Memory assignment
The memory occupancy lists all the voice boxes that are switched on and the memo-
ry space reserved for them. Please note that for technical reasons it is not possible to
reserve the whole space on the MMC for voice boxes. Unassigned directories from
former voice boxes also reduce the available memory space.
SIP
Note: This menu is only available with a tiptel VoIP-Module installed
RTP Settings
This setting allows you to determine how long the device collects all speech data
packets that are to be sent before actually sending them. The shorter this time frame
is, the greater the necessary bandwidth. Reason: The speech data is sent in smaller
packets. For each packet, however, what is known as a header has to be calculated.
This header is sent less frequently in the case of larger speech data packets.
If, however, a larger speech data packet does not reach the recipient, this is noticea-
ble due to an acoustic interruption.
Dejitter buffer size: Jitter describes the time fluctuation between the receiving of two
data packets. To compensate for time fluctuations, a buffer (dejitter buffer) is em-
ployed. When setting the size of the dejitter buffer, please keep the following effects
65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tiptel 411 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Tiptel 411

Tiptel 411 Bedienungsanleitung - Deutsch - 33 seiten

Tiptel 411 Kurzanleitung - Deutsch - 40 seiten

Tiptel 411 Bedienungsanleitung - Deutsch - 49 seiten

Tiptel 411 Kurzanleitung - Englisch - 40 seiten

Tiptel 411 Bedienungsanleitung - Englisch - 32 seiten

Tiptel 411 Kurzanleitung - Holländisch - 40 seiten

Tiptel 411 Installationsanweisung - Holländisch - 108 seiten

Tiptel 411 Bedienungsanleitung - Holländisch - 97 seiten

Tiptel 411 Zusatzinformation - Holländisch - 3 seiten

Tiptel 411 Bedienungsanleitung - Holländisch - 36 seiten

Tiptel 411 Bedienungsanleitung - Französisch - 32 seiten

Tiptel 411 Kurzanleitung - Französisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info