Bedienungsanleitung Tiptel 811 (Seite 13 von 40) (Deutsch, Englisch, Holländisch, Französisch)

628561

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Quick Installation Guide

Safety notes

The device may not be installed or operated in the following environments:

o in the open

o in damp or wet rooms (bathroom, shower, swimming pool ...)

o at locations with direct sunlight

o in explosive areas

o with ambient temperatures below 0 °C or above 40 °C

o with strong concussions or vibrations

o in dusty environment

 The device has been designed for wall mounting, the device must not be covered and

must have a distance of at least 10 cm to any other objects (this of course does not

apply to the module)

 During a thunderstorm you should neither use the phone nor connect or disconnect

any cables (Danger of an electric shock when a lightning hits the telephone network).

 Unauthorized removal of the telephone system's cover or inappropriate repairs may

result in hazard for the user.

 When disposing of the device all applicable national laws and regulations must be

obeyed.



In case of a power outage emergency calls cannot be made without a UPS. For exceptions to

this rule please see the User's Manual of your device. Dial locks may block emergen-

cy calls.

 Install all connection cables with care so that no tripping hazards result from the in-

stallation. Connection cables may not be bent excessively, pulled, or stressed me-

chanically. Connection cables may only be installed inside of buildings.

 ISDN connections, data and audio ports are SELV circuits and may only be connect-

ed to circuits which are also SELV themselves.

 With any malfunction the power cord must be removed from the wall outlet and all tel-

ecommunication cables must be disconnected.

 FXO lines (external analogue lines) may not be connected to the public telephone

network in the following countries: Finland, Norway, and Sweden.

 External analogue lines may only be connected to TNV circuits with a maximum

source voltage of 60 V.

 Installations must be carried out by persons having the appropriate technical training

and experience necessary to be aware of the hazards to which they are exposed in

performing a task and of measures to minimise the danger to themselves or other

persons.

 Applicable regulations in accordance with IEC60950 and IEC60364 have to be ob-

served.

 Equipment with connection to AC supply circuits may lead to an accumulation of con-

tact currents at the telephone system. The service personnel must make sure that the

touch current (leakage current) at no time will exceed 3.5 mA.

 Devices with protective earth plugs (safety plugs) may only be connected to wall out-

lets with protective earth contact.

 Before opening the cabinet the system must be disconnected from mains (remove

power cord) and from any telecommunication cables



Power supplies may only be used if approved by the manufacturer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tiptel 811 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tiptel 811

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info