Bedienungsanleitung Tivoli MODEL 10 PLUS Stereo (Seite 11 von 72) (Deutsch, Englisch, Dänisch, Französisch, Norwegisch)

510684

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

11 – ENGLISH

3. BALANCE (FOUND UNDER TIVOLI EQ): As the Balance control has no affect when the

Model 10+ is set to Mono, this setting should remain in the center position, except when the

optional Model 10 Speaker is connected and Stereo mode is selected via the remote control’s

“Mono” button. Though we still recommend the center balance setting in Stereo mode, you

may use the pq buttons to adjust the balance to your liking, then press the Select button to

store any change.

4. TIME (FOUND UNDER SETTINGS):

Set 12/24 hour:

Press the Select button and use pq and Select buttons to choose 12 or 24 hour clock format.

Set time/date:

Press the Select button and use pq and Select buttons to adjust the hour and then minutes,

immediately followed by the date. You must also set the Auto update to “No update”. For more,

refer to “Auto update” below.

Auto Update:

Press the Select button and use pq and Select buttons to choose between “Update from any”,

“Update from DAB” (also DMB), or “Update from FM” (RDS). For any of the auto updates to

work, you must have consistent reception of DAB or FM RDS with a time/date signal provided.

It could take up to a minute or more for the clock to update. Tivoli Audio is not responsible for

inaccurate time/date information provided by the auto update signal.

To set the clock manually, select “No Update”, and then select “Set Time/Date” under the

“Time” menu using the pq or tu buttons and the Select button to set the hour. Repeat to

set the minutes and press Select to save. Within this same “Time” menu are additional options

to set the date format, and 12/24 hour clock mode.

NOTE: During a power outage, the alarm time(s) and clock will be maintained by an integrated

back-up memory. When “Auto update” is set to “Update from any”, the radio may ﬁnd the

clock signal from the last listened station, even when the Model 10+ is in standby.

Set date format:

Press the Select button and use the pq and Select buttons to choose the date format

you prefer.

5. BACKLIGHT (FOUND UNDER SETTINGS):

Timeout:

The backlight level can be constant regardless of whether you are using any controls on the

Model 10+ or not (this is the way the Model 10+ is conﬁgured from the factory), or you can

customize the backlight to automatically change to a “Dim level” setting after a ﬁxed period

of time for as long as no controls are being used. Once a control on the unit or the remote is

pressed, the normal backlight level is restored.

Press Select and use the pq and the Select buttons to set the amount of time it will take for

the backlight to change to the dim level from 10, 20 ,30, 45, 60, 90, 120, or 180 seconds, or

to keep the timeout feature Off.

On Level:

Press Select and use the pq and Select buttons to choose the intensity of the backlight.

Dim Level:

If you selected a time for the backlight to change to a dim setting under “Timeout”, then press

Select and use the pq and Select buttons to choose the intensity of the backlight when

it changes to this dim setting. Setting the Dim level to “Off” may be desirable if the display

backlight is bothersome while sleeping.

6. LANGUAGE (FOUND UNDER SETTINGS): Press Select and use pq and Select buttons to

set your language.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tivoli MODEL 10 PLUS Stereo Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info