Bedienungsanleitung Tivoli Model 10 STEREO (Seite 10 von 132) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

510682

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

English

9. pq/TUNE +/-: Press to adjust menu items. Use these same buttons to manually tune up or

down when in FM or AM mode. Press and hold to move quickly through the frequencies. A “T”

will show on the display to indicate manual tuning mode. It will take 2 or 3 seconds until the

frequencies begin to change. Press for 1.5 seconds and release to auto scan to the next station

detected. The display will show “ ” when auto scanning in FM and “ ” when auto

scanning in AM.

10. : Press to navigate back or forward through the menu.

11. MENU/SELECT: Press to enter the main menu and press to select items within the menu. For

more, see the section marked “Menu”. Some of the menu items can be accessed regardless

of whether the Model 10 is on or off.

12. MONO: Press to change the Stereo/Mono setting. The display will show “M” for mono or “ST”

for stereo. “Mono” or “Stereo” will also be one of the ﬁelds shown when pressing the Info

button on the remote. This setting also affects the headphone output. For more, see the

section marked “FM/AM Reception”.

Menu:

(Press the Menu/Select button brieﬂy. Use the  buttons to navigate through the menu pages

and the pq buttons to change the items within the menu.)

1. TREBLE: Use pq to adjust the treble and press Select to proceed to the next menu item.

2. BASS: Use pq to adjust the bass and press Select to proceed to the next menu item.

3. BALANCE: As the balance control has no effect when the Model 10 is set to Mono, this

setting should remain in the center position, except when the optional Model 10 Speaker is

connected and Stereo mode is selected via the remote control’s “Mono” button. Though we

still recommend the center balance setting in Stereo mode, you may use the pq buttons to

adjust the balance to your liking, and press the Select button.

4. EQ: The equalizer acts as a Loudness control at low volume levels. Use pq to select between

having the EQ on, having the EQ always off, or the EQ off until the Model 10 is turned off (when

it is turned on again the EQ will be on again). Press Select to proceed to the next menu item.

5. DISPLAY OFF: Use the pq and Select buttons to set the display on or off. Setting the display off

will turn the backlight off when the Model 10 is turned off. This may be desirable when sleeping.

While the display is off, pressing a button on the remote will turn the display on for 10 seconds.

6. BACKLIGHT: Use pq to make the backlight brighter or dimmer.

7. CONTRAST: Use pq to increase or decrease the display contrast.

8. CLOCK SET: Use pq to set/change the hour, then press Select. Repeat this process to set/

change the minutes, then press Select to proceed to the next menu item. Use pq to set the

year and press Select to proceed to the next menu item. Use pq to set the month and press

Select to proceed to the next menu item. Use pq to set the day and press Select to complete

the process and return to the source screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tivoli Model 10 STEREO Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info