Bedienungsanleitung Toa M-864D (Seite 5 von 60) (Englisch)

692130

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

• Since the unit is designed for indoor use, do not

install it outdoors. If installed outdoors, the aging of

parts causes the unit to fall off, resulting in personal

injury. Also, when it gets wet with rain, there is a

danger of electric shock.

When the Unit is in Use

• Should the following irregularity be found during

use, immediately switch off the power, disconnect

the power supply plug from the AC outlet and

contact your nearest TOA dealer. Make no further

attempt to operate the unit in this condition as this

may cause fire or electric shock.

· If you detect smoke or a strange smell coming

from the unit.

· If water or any metallic object gets into the unit

· If the unit falls, or the unit case breaks

· If the power supply cord is damaged (exposure of

the core, disconnection, etc.)

· If it is malfunctioning (no tone sounds.)

• Topreventafireorelectricshock,neveropennor

remove the unit case as there are high voltage

components inside the unit. Refer all servicing to

qualified service personnel.

• Do not place cups, bowls, or other containers of

liquid or metallic objects on top of the unit. If they

accidentally spill into the unit, this may cause a fire

or electric shock.

• Donotinsertnordropmetallicobjectsorflammable

materialsintheventilationslotsoftheunit'scover

as this may result in fire or electric shock.

• Theapparatusshallbeconnectedtoamainsocket

outlet with a protective earthing connection.

• The socket-outlet shall be installed near the

equipment and the plug shall be easily accessible.

When Installing the Unit

• Never plug in nor remove the power supply plug

with wet hands, as doing so may cause electric

shock.

•When unplugging the power supply cord, be sure

to grasp the power supply plug; never pull on the

cord itself. Operating the unit with a damaged power

supply cord may cause a fire or electric shock.

• Whenmovingtheunit,besuretoremoveitspower

supply cord from the wall outlet. Moving the unit

with the power cord connected to the outlet may

cause damage to the power cord, resulting in fire or

electric shock. When removing the power cord, be

sure to hold its plug to pull.

• Donotblocktheventilationslotsontheunit’sboth

sides, top panel, and rear side. Doing so may cause

heat to build up inside the unit and result in fire.

Also, periodically clean the ventilation slots of dust.

• Avoidinstallingtheunitinhumidordustylocations,

in locations exposed to the direct sunlight, near the

heaters, or in locations generating sooty smoke

or steam as doing otherwise may result in fire or

electric shock.

• Besuretofollowtheinstructionsbelowwhenrack-

mounting the unit. Failure to do so may cause a fire

or personal injury.

· Installtheequipmentrackonastable,hardoor.

Fix it with anchor bolts or take other arrangements

to prevent it from falling down.

· Whenconnectingtheunit'spowercordtoanAC

outlet, use the AC outlet with current capacity

allowable to the unit.

(Every version except the M-864D CU for US)

· The supplied rack-mounting screws can be used

for the TOA equipment rack only. Do not use them

for other racks.

(M-864D CU for US)

· Rack-mounting screws are not supplied with the

unit. Prepare them that are appropriate for the

equipment rack.

· Be sure to complete installation and cable

connections before connecting the unit’s power

plug to the power source. When uninstalling the

unit or disconnecting the unit’s cables, be sure to

disconnect the power plug from the power source

rst.Doingotherwisemayresultinelectricshock.

• LANConnectorcannotconnecttoConnectorwhich

might catch overvoltage.

When the Unit is in Use

• (WhenusingtheZM-9011/9012/9013/9014Remote

Control Panel)

Be sure to use the dedicated AC Adapter or its

equivalent.

Using other AC adapter may cause a fire.

• If dust accumulates on the power supply plug or

in the wall AC outlet, a fire may result. Clean it

periodically. In addition, insert the plug in the wall

outlet securely.

• Switchoffthepower,andunplugthepowersupply

plug from the AC outlet for safety purposes when

cleaning or leaving the unit unused for 10 days or

more. Doing otherwise may cause a fire or electric

shock.

Thelightingashwitharrowheadsymbol,withinanequilateraltriangle,isintendedtoalertthe

usertothepresenceofuninsulated"dangerousvoltage"withintheproduct'senclosurethatmay

beofsufcientmagnitudetoconstituteariskofelectricshocktopersons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence

of important operation and maintenance (servicing) instruction in the literature accompanying the

appliance.

CAUTION

Toa M-864D Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info