Bedienungsanleitung Tokai LRD-3050K (Seite 14 von 50) (Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

485807

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Illustration of the Keys on the Remote

Controller and Their Main Functions

SELECT

1. DVD/USB/CARD button

2. P/N button

3. PROGRAM/GUIDE button

4. REPEAT button

5. MENU button

6. SUBTITLE button

7. PLAY button

8. TITLE button

9. AUDIO button

10. PAUSE/STEP button

11. ANGLE button

12. ZOOM button

13. DVD/DVB-T button

14. TV/RADIO button

15. DISPLAY button

16. SETUP button

17. TFT ON/OFF button

18. NUMERIC buttons

19. CLEAR button

20. STOP button

21. SELECT button

22. NAVIGATION buttons

(LEFT, RIGHT, UP/CH+, DOWN/CH- buttons)

23. SLOW button

24. NEXT&F.FWD button

25. PREV.&F.BWD button

26. SEARCH button

27. TEXT button

BATTERY INSTALLATION

MAIN UNIT BATTERY INSTALLATION

1. Remove the Battery Compartment Cover by gently pushing

in the opposite direction of the "OPEN" arrow and lifting up.

Insert 8 pcs "UM2" or "C" type batteries. For best

performance, always use heavy duty alkaline batteries.

Be sure to place the batteries as the engraved diagram

shown at the bottom of the cabinet.

2. Replace the cover.

NOTE: Old batteries may swell and leak. To avoid damage to

your instrument, remove the batteries when the unit is to be

stored for long periods of time or if the batteries become

exhausted.

NOTE: To use your set on battery power, you MUST remove

the AC cord from both the wall outlet and the back of the set.

REMOTE CONTROL BATTERY INSTALLATION

Insert the battery while observing the correct (+) and (-)

polarities.

NOTE:

The battery normally last for about one year although this

depends on how often, and for what operations, the remote

control unit is used.

If the remote control unit fails to work even when it is

operated near the player, replace the batteries.

Use one CR2025 battery.

BASIC CONNECTION

It is recommended to be connected to a multi-system TV.

Ensure that this player and other equipment to be connected

to the unit are in the standby or off mode and disconnect the

AC power cords before commencing connection.

Do not block ventilation holes of any piece of the equipment

and arrange them so that air can circulate freely.

Read through the instructions before connecting other

equipment.

Ensure that you observe the color coding when connecting

audio, video cables. If the RCA adapter is supplied only, the

audio/video RCA cable is required. Plug one end of the RCA

adapter to the unit. Then connect the audio/video RCA cable

to the RCA adapter and the television.

Note:

During DVD play, the TV volume may be at a lower level than

during TV broadcasts, etc. If this is the case, adjust the

volume to the desired level.

If the DVD/CD player is connected to the TV through a video

cassette recorder, the picture may not be played back

normally with some DVDs. If this is the case, do not connect

the player via the VCR.

Connecting to a stereo TV set

To power outlet

AC power cord

To video input connector (yellow)

To audio input connectors (red, white)

Video/audio cable

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tokai LRD-3050K Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info