Bedienungsanleitung Tomado TEH1001W (Seite 13 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch)

748214

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

PRIOR TO FIRST USE

Before using the appliance for the rst me, you should proceed as follows: carefully unpack the hob and remove all

packaging material and any promoonal sckers. Keep the packaging (plasc bags and cardboard) out of reach of children.

Aer unpacking the appliance, carefully check it for external damage that may have occurred during transport.

The

hot plate becomes hot during use, and

also aer use, the

hot plate remains hot for some me. Mount the

supplied handles,

so you can pick up

the

hot plate safely if you want and

move it without

burning yourself. Screw the

handles ght on both sides of

the

hot plate using the

provided screws.

Place the hot plate on a sturdy, at and heat-resistant surface. Clean the hot plate with a slightly damp cloth. The hot plate is

provided with a protecve layer that must be removed prior to rst use. This is done by turning on the hot plate at maximum

level for approximately 4 to 5 minutes. Dothisinaproperlyvenlatedroom! Light smoke may form due to the protecve layer

burning o the hot plate. Aer removing the protecve layer you can switch o the hot plate or start using it.

USE

Switch the thermostat knob to «MIN». Only then insert the plug in the socket. Turn the thermostat knob of the hot plate to the

right, to the required posion. The indicator light lights up.

Posion «MIN» of the hot plate is the lowest posion and posion «MAX» is the highest posion.

Use a low posion [MINto4] for simmering and a higher posion [5toMAX] for boiling and frying.

The thermostat knob is a stepless control:

MIN = low

1-4 = keep warm-simmer

5 = boiling and frying

MAX = high

It takes approximately 10 minutes for the hot plate to reach maximum temperature (on the maximum seng of the thermostat

knob). When the set temperature has been reached, the indicator light switches o. Aer a drop in temperature, due to heat

transfer to the pan, the thermostat switches on again. The indicator light will light up again. Due to the construcon of the

hot plate, it remains hot for some me aer switching o. This residual heat can be used to keep the food warm for a short

period of me.

CAUTION: THE APPLIANCE CAN GET VERY HOT DURING USE, THEREFORE PLACE THE APPLIANCE DURING USE ON A HEAT-

RESISTANT PLATE AND NEVER, FOR EXAMPLE, ON A PLASTIC TABLE, PLASTIC TABLE CLOTH OR REFRIDGERATOR.

Only use pans with booms that have the same diameter as the hot plate itself. Smaller diameters lead to loss of energy.

Do not touch the hot plate when it is switched on. Please note that the hot plate does not cool down immediately aer being

switched o. Turn the thermostat knob to the «MIN» posion and remove the plug from the socket aer each use.

EN - 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tomado TEH1001W Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info