Bedienungsanleitung Tomado TFS4005B (Seite 14 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch)

748273

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

EN - 14

ASSEMBLY

Before using the fan for the rst me, please proceed as follows: carefully unpack the appliance and all components and

remove all packaging material and any promoonal sckers.

Keep the packaging (plasc bags and cardboard) out of reach of children.

Aer unpacking the appliance, carefully check it for external damage that may have occurred during transport.

Assemble the fan in accordance with the instrucons.

In order to make the assembly process more easy, we recommend removing components [ a ] and [ b ] before you start.

1. Start by placing the cross foot at the pedestal. Place the parts of the cross foot cross-wise on top of one another and align

the connecon base with the screw openings on the cross foot. Mount the pedestal to the cross foot using the screws [ b ].

2. Place the motor secon on the pedestal and fasten it with screw [ a ].

3. Place the rear protecve guard on the fan.

4. Fasten it by ghtening the lock ring.

5. Insert the fan blade onto the fan. Test the fan blade by rotang it by hand. When rotang, the blade should not create

any fricon with the lock ring. If it does, remove the fan and repeat all steps from the beginning.

6. Mount the fan blade with the fastening cap. Tighten the fastening cap by turning it to the le - counter-clockwise.

7. Place the front protecve guard on the fan and use the clamps to aach it to the rear protecve guard.

- Align the front protecve guard with the rear protecve guard using the posioning clamp [ c ] on the boom side in

order to aach both parts to each other properly. Use the bolt and nut at the top of the guards to fasten the guards

to each other.

- Press the clamps [ d ] downwards in order to fasten the front and rear protecve guards to each other.

Place the fan on a at, stable surface. Clean the exterior of the fan using a slightly damp cloth and then wipe it with a dry cloth.

The fan is ready for use.

OPERATING THE PEDESTAL FAN

The range of the remote control is approx. 5 metres at an angle of 30° in front of the fan.

Insert the two supplied AAA 1.5 Volt baeries in the remote control, as indicated in the drawing.

Do take the plus and minus symbols on the inside of the remote control into account.

The remote control has the same funcon keys as the fan's control panel.

Place the fan on a at, stable surface. Insert the plug in a wall socket.

Switching on/o

Press the ON/OFF key to switch on the fan. By pressing the key once more, you switch o the appliance.

Adjusng the speed

With every press on the SPEED key you change the speed of the fan:

low

= low

med = medium

high

= high

baeries

speed

mer

on/ o

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tomado TFS4005B Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info