Insert the plug into the plug socket.
Set the On/Off button to ON (‘I’).
Press the ‘h’ function button to set the hours.
Press the ‘min’ function button to set the minutes.
TIPS FOR USE
NOTE
Only use cold, clean water to make coffee.
If you do not wish to use the timer, then follow the
instructions given below:
Place the appliance on a flat, stable surface.
Insert the plug into the plug socket.
Set the On/Off button to ON (‘I’).
Fill the water reservoir with clean, cold water. Make sure
the level of water in the reservoir is not below the lowest
mark and not above the ‘Max’ mark. The number of
cups of coffee that will be made can be read from the
indicator on the water reservoir.
Check whether the permanent filter has been placed in
the filter holder. If the permanent filter is not used, then
a paper coffee filter must be used. Place this filter in the
filter holder.
Fill the filter with the desired quantity of ground coffee
(use approximately 5-6 g of ground coffee per cup).
Check whether the coffee jar is empty and has been
2.
3.
4.
5.
u
•
1.
2.
3.
4.
5.
6.
7.
correctly placed on the hotplate.
Press the ‘On/Off’ button to turn on the appliance
immediately.
Once all the coffee has passed through the appliance,
the indicator light will be lit RED continuously. The
appliance will keep the coffee warm on the hotplate until
you turn off the appliance.
Press the ‘On/Off’ button to turn off the appliance.
If you leave the appliance turned on for two hours
without pressing a button, the appliance will turn itself
off.
Remove the paper filter and the coffee dregs from the
filter holder.
If you wish to make some more coffee immediately, wait
at least 5 minutes so that the appliance can cool down. It
will then be safe to refill the water reservoir.
Setting the timer (0 - 24 hours)
You can set the timer between 0 and 24 hours. This can be
used, for example, to turn on the appliance at 11.00 p.m.
with a delayed start time of 8 hours, so that you can enjoy a
fresh cup of coffee at 7.00 a.m the next morning.
Place the appliance on a flat, stable surface.
Insert the plug into the plug socket.
Set the On/Off button to ON (‘I’).
Press the ‘Set’ button and do not release it.
Press the ‘h’ button to set the desired number of hours
before the appliance will turn itself on.
8.
9.
10.
11.
12.
1.
2.
3.
4.
5.
