9
Using the appliance
• This appliance is intended for domestic and similar
use, such as:
o in staff kitchens in shops, offices and other working
environments;
o on farms;
o by hotel or motel guests or guests in other
residential settings;
o in bed and breakfasts or similar environments.
• The use of accessories not recommended by the
manufacturer of the appliance may result in personal
injury.
• Only use this appliance indoors, in dry areas away
from water.
• Never immerse the appliance or the plug in water
or any other liquid. This may result in a fatal electric
shock!
• Do not use the appliance outdoors or on wet surfaces,
to avoid the risk of electric shock.
• Place the appliance on a stable, level surface from
which it cannot fall onto the floor.
• Place the appliance on a heat-resistant surface and
not, for example, on varnished furniture.
• Place the appliance at least 50 cm from a wall or
inflammable materials (such as curtains, candles or
cloths).
• Place the appliance on a stable and flat surface, not
too close to hot objects or naked flames (such as
stovetops or hotplates).
• Remove the plug from its socket when the appliance is
not in use and for cleaning.
• Make sure the power cord does not come into contact
with hot surfaces or steam.
• Always remove the plug from the power socket before
moving the appliance.
• Do not operate the appliance by means of an external
time switch or a separate remote control system.
• If an extension lead is required, use a 10 amp power
cord. Power cords with a lower amp rating may burn
out. When positioning the power cord, make sure that
it cannot be pulled on or tripped over.
• Avoid overloading by not connecting too many
appliances to a group.
• Never immerse the appliance, the plug or the housing in
water or other liquids, to avoid the risk of electric shock.
• Do not touch the appliance if it has fallen into
water. Remove the plug from its socket, turn off the
appliance and do not use it again.
• Do not use the appliance close to hot objects such as
a stove or oven.
• Always remove the plug from the plug socket and
allow the appliance to cool down:
o before moving the appliance;
o before storing the appliance;
o before assembling or disassembling parts;
o before cleaning the appliance or performing
maintenance;
o after using the appliance.
• Only pick up the appliance by its handle, certain parts
of the appliance become hot during use. Do not touch
the metal parts, these get very hot.
• >1000W: Do not use any other high power
appliances in the same group, to avoid overloading.
Instruction manual TM-2434
