693105

Tommee Tippee 1094S Seite 5

5
Zoom out
Zoom in
Vorherige Seite
1/10
Nächste Seite
• Check immediately the location of corded monitors to make sure cords are out of arm’s reach of
your baby and other young children.
• Place cords more than a metre away from any part of the cot. The monitor must not be used in any
other sleep environment.
• Check the location of the monitor periodically, as what is within arm’s reach to a baby will change as
the baby grows.
• Make sure the sensor cords are taut and not dangling to reduce the strangulation hazard.
• Do not place furniture or other obstructions on the adaptor cords and be sure to position them so
that nobody can trip over them
• Keep adaptor cords away from hot surfaces such as radiators and central heating pipes.
• Be careful not to position the adaptor where a child might try to stop on it.
• Never use Tommee Tippee monitor adaptors with any other equipment. Nor should you use any
other adaptors with your Tommee Tippee monitor.
•
Please note that the adaptors become warm in use –
this is quite normal and not a hazard.
• The adaptors convert your AC power to a safe low DC voltage.
• Use the power adaptor provided.
• The product is only suitable for use for cots and cotbeds that comply with EN716.
Adaptor:
Manufacturer: TEN PAO INTERNATIONAL LTD.
Model no.: EU: S006MV0600080 UK: S006MB0600080
setting up the parent unit
Connect the mains adaptor into a nearby wall socket in your baby’s nursery and switch on the power
at the mains.
Press POWER on the parent unit until the POWER INDICATOR is on. The parent unit is now powered
on and the parent unit will search for and link itself to the baby unit.
Ensure that the sensor pad on-o switch is turned OFF.
In monitoring mode, you can press <LCD ON/OFF> on the parent unit. Turning o the LCD will not
power o the parent unit, you can still monitor the baby with it
setting up your baby unit
Connect the mains adaptor into a nearby wall socket in your baby’s nursery and switch on the power at
the mains.
Press POWER on the baby unit until the POWER INDICATOR is on. The baby unit is now powered on and
will link with the parent unit.
Ensure that the sensor pad on-o switch is turned OFF.
Direct the camera towards the baby’s cot. For adjusting the zoom feature, refer to section
‘Adjusting the Zoom’.
testing the parent unit
• First ensure that the baby unit has been set up and is working correctly following the previous
instructions.
• To test the parent unit you must ensure that it is at least 5 metres away from the baby unit.
• Turn the sensor pad OFF.
• Place a sound source in the nursery at least 1 to 1.5 metres away from the baby unit, close the nursery
door and go to another room with the parent unit only.
• Turn on the power and adjust the volume up or down to a comfortable level.
• You will hear sounds from your nursery.
• Walk around your house and garden with the parent unit, ensuring that you can hear the sounds from
the baby unit at all times. The monitor will work up to a distance range of 300m approximately.
Depending on the surrounding conditions as well as spatial and structural factors. The range indoors is
normally less than outdoors.
• If you lose the signal from the baby unit a beep tone will be emitted from the parent unit and the
antenna icon will ash. Even if the speaker volume is set OFF, the alert tone will still emit at volume
level 1 when no link alert is triggered. Alert tone will only be emitted once initially. The screen will
continue to show NO LINK until restored.
1
2
3
4
1
2
3
4
NOTE:
Any triggering events such as baby cries, temperature of baby’s room exceeds the alert range,
parent unit loses link with baby unit, etc. will turn on the LCD automatically.
WARNING about using the baby unit!
• The baby unit should be 1 to 1.5 metres away from the baby’s cot on a at surface or use the
tripod mount.
• Never place the baby unit in or attach to the baby’s cot.
9
8
WARNING about the danger of cords:
STRANGULATION HAZARD! - Keep cords out of the reach of children.
Do not use with an extension cord.
WARNING! STRANGULATION HAZARD! Children have STRANGLED in cords.
When using without protective covering. Keep this cord out of the reach of children
(more than 0.9 m (3ft) away).
!
… 5 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tommee Tippee 1094S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info