693111

Tommee Tippee Electric bottle warmer - 422144 Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
HOW TO USE
FOR FEEDING BOTTLES
FOR BABY JARS
The speed at which the warmer heats the milk or food will depend on the size of the bottle or container and the starting
temperature of the milk or food (e.g. room temperature 20˚C or from the refridgerator 5˚C).
We recommend that setting 3 is always used for heating up, and settings 2 and 1 are used for keeping warm only.
MILK OR FOOD SHOULD NOT BE HEATED FOR OVER 30 MINUTES.
The guide gives an indication of the time you can expect the warmer to take. Maximum average stabilised temperature
is approximately 85˚C
Place filled bottle in warmer.
Fill the warmer with water to approximately 10mm below the rim of the warmer. Never let the water overflow or rise
above the neck of the bottle. For larger bottles, fill to 12mm below the rim of the warmer.
Before plugging in, make sure the bottle warmer is switched to the “MIN” setting.
Plug in unit. The amber light will turn on to indicate the warmer is switched on and is heating up.
Turn dial to setting 3.
Once the water is heated, the amber light will switch off to indicate that the thermostat will maintain the temperature
of the water. It does not indicate that the milk is ready.
Heat the milk to the desired temperature. Ensure that the heating guidelines are followed to ensure that the food is
not heated for too long.
Take care when removing the bottle, as it and the surrounding water will be hot.
For your child’s safety – Always check food temperature before feeding by testing on a sensitive part of your skin.
Take care not to overheat the milk.
In betwee can be placed back in the warmer to keep milk warm. The thermostat will maintain the temperature of the
water. In doing this the indicator light will switch to amber to indicate the warmer is heating up.
Turn back the dial to the lowest setting and unplug the unit after feeding.
Remove the lid and place jar in warmer.
Fill the warmer with water to approximately 10mm below the rim of the warmer.
Before plugging in, make sure the bottle warmer is switched to the lowest setting.
Plug in the unit. The amber light will turn on to indicate the warmer is switched on and is heating up.
Turn dial to preferred setting.
Once the water is heated, the amber light will switch off to indicate that the thermostat will maintain the temperature
of the water. It does not indicate that the food is ready. To ensure that the food stays at the temperature you have
selected, the thermostat will maintain the temperature of the water. In doing this the indicator light may switch to
amber whilst you are heating the food.
Heat food to the desired temperature. Ensure that the heating guidelines are followed to ensure that the food is not
heated for too long.
Take care when removing the jar, as the surrounding water will be hot.
For your child’s safety – Always check food temperature before feeding by testing on a sensitive part of your skin.
Take care not to overheat the food.
In between feeding, the jar can be placed back in the warmer to keep milk warm. The thermostat will maintain the
temperature of the water. In doing this the indicator light will switch to amber to indicate the warmer is heating up.
Turn back dial to the lowest setting and unplug the unit after feeding.
1
1
2
3
4
5
6
7
8
9
9
2
3
4
5
6
7
8
10
11
10
11
DE-SCALING
Unplug and allow to cool before cleaning. Wipe with a damp cloth only. Do not clean with abrasive cleaners or
allow to come into contact with solvents or harsh chemicals, damage could result.
De-scale your bottle warmer every 4 weeks to ensure it continues to work efficiently. To de-scale your bottle warmer,
use de-scaling sachets, following the manufacturers instructions on the pack carefully.
INFORMATION ON THE DISPOSAL FOR WASTE ELECTRICAL & ELECTRONIC EQUIPMENT (WEEE)
This symbol on the products and accompanying documents means that used electrical and electronic products should not be mixed with
general household waste. For proper disposal for treatment, recovery and recycling, please take these products to designated collection
points where they will be accepted on a free of charge basis. In some countries you may be able to return your products to your local
retailer upon the purchase of a new product.
Disposing of this product correctly will help you save valuable resources and prevent any possible eects on human health and the
environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of
your nearest collection point for WEEE.
Penalties may be applicable for the incorrect disposal of this product in accordance with national legislation.
The product is tted with a BS 1363 mains plug containing a fuse. If it ever becomes necessary to replace the fuse, only use fuses that are
marked BS 1362, and rated at 13A. In the unlikely event that this plug is not suitable for the sockets in your home, it should be removed
and a suitable plug tted as follows:
The wires of the mains lead are coloured in accordance with the following code:
GREEN AND YELLOW – EARTH
BLUE – NEUTRAL
BROWN – LIVE
As these colours may not correspond with the coloured markings sometimes used to identify the terminals in the plug, connect as follows.
The wire coloured GREEN AND YELLOW must be connected to the terminal marked E or by the earth symbol or coloured GREEN or GREEN
AND YELLOW. The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must
be connected to the terminal marked L or coloured RED.
If you are in any doubt about how to wire a plug or replace a fuse safely, consult a qualied electrician.
WARRANTY: This product has 12 months warranty period after the date of purchase.
If you have any questions please visit our website www.tommeetippee.com
Nothing in this warranty shall be construed as removing or limiting a consumers rights in law.
HOW TO CLEAN THE ELECTRIC BOTTLE WARMER
422144
Jackel International Limited trading as Mayborn Group.
Northumberland Business Park West, Cramlington, Northumberland NE23 7RH, UK
Copyright © Jackel International Limited 2016.
TOMMEE TIPPEE is a registered trademark of Jackel International Limited.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tommee Tippee Electric bottle warmer - 422144 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info