Bedienungsanleitung Tommee Tippee Electric steam steriliser

693128

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

SET UP

CLEAN YOUR STERILISER BEFORE FIRST USE - Refer to parts guide and diagram

1. Do not connect to power at this stage.

2. Remove all items from inside the steriliser base.

3. Pour exactly 80ml of water into the steriliser base.

4. Assemble the lower tray (A) with logo front facing and upper tray (B) and place in the steriliser base.

5. Add the lid.

6. Connect the lead and plug into the mains supply. Switch on at mains supply.

7. Press the play switch and it will light up amber to show the sterilising has begun.

8. The light will switch off when sterilising has nished.

9. Allow to cool for 5 minutes before turning off at the mains, removing the plug and steriliser lid.

10. Remove upper tray and lower tray, pour away any remaining water and wipe dry. Your steriliser is now ready to use.

This steriliser is designed for use with Tommee Tippee bottles and feeding accessories (except bottle brush).

The steriliser will hold a maximum of 6 Tommee Tippee bottles or a combination of fewer bottles plus

soothers and breast pump parts.

PARTS GUIDE

CLEANING

Unplug and allow to cool before cleaning. After each use pour away remaining water from the steriliser base by tipping

the steriliser sideways over a sink and wipe clean with a damp cloth only. Do not clean with abrasive cleaners or allow

to come into contact with solvents or harsh chemicals, damage could result.

DE-SCALING

The frequency of de-scaling should be as follows:

Hard water: 14 days

Medium: 21

Soft: 28

You can nd out your water quality via your water provider. FAQs and a picture of limescale can be found on our

website. After each use pour away remaining water from the unit base by tipping the unit sideways over a sink and

wipe with a damp cloth only. Unplug the unit and allow to cool before cleaning. A build up of limescale can negatively

affect the performance of the unit. We recommend carrying out the descaling process as per above frequency

guidelines to ensure the unit continues to work efciently. Living in a hard water area can produce limescale quicker

than other areas therefore descaling is required sooner. Use a descaler that is suitable for use with stainless steel and

use as per the manufacturer’s guidelines. Alternatively you can use white vinegar or a descaling sachet to descale

your unit, please use as per manufacturer’s guidelines. Where no method is stated, 1 sachet to 200ml of hot water ratio

can be applied. See our website for detailed descaling method. Once you have descaled then follow instructions under

set up to perform a nal cleaning cycle. DO NOT use metal objects or scourers to clean your unit. DO NOT use bleach

or sterilising uid to clean the unit. DO NOT use abrasive or anti-bacterial materials. DO NOT scrub the heat plate.

TROUBLESHOOTING

Steriliser will not work

Check the mains lead is plugged into the unit and the mains socket is switched on. Check the fuse is in the plug (in

a UK plug only). Check the socket by plugging in another appliance. Check the appliance by plugging into another

socket.

Excessive steam

Check that items are correctly loaded in steriliser. Use exactly 80ml.

Bottles come out with a chalky mark

Steriliser needs descaling. Refer to Cleaning Instructions.

Cycle takes too long to complete

Too much water in steriliser. Use exactly 80ml.

a. Removable lower tray

b. Removable upper tray

c. Drying rack (parts a+b) with sterile surface

d. Locator for tommee tippee bottle neck

e. Locator for tommee tippee anti-colic valve (for

use if sterilising advanced anti-colic bottle)

f. Locator for bottle hood

g. Lid

h. Steriliser base

i. Lead with plug

j. Power button (play)

k. Stop button

l. Sterilising indicator light

m. Steam vents

n. 80ml measurement on Tommee Tippee bottle

o. Cable tidy

INFORMATION ON THE DISPOSAL FOR WASTE ELECTRICAL & ELECTRONIC EQUIPMENT (WEEE)

This symbol on the products and accompanying documents means that used electrical and electronic products

should not be mixed with general household waste. For proper disposal for treatment, recovery and recycling, please

take these products to designated collection points where they will be accepted on a free of charge basis. In some

countries you may be able to return your products to your local retailer upon the purchase of a new product.

Disposing of this product correctly will help you save valuable resources and prevent any possible effects on human

health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local

authority for further details of your nearest collection point for WEEE.

Penalties may be applicable for the incorrect disposal of this product in accordance with national legislation.

The product is tted with a BS 1363 mains plug containing a fuse. If it ever becomes necessary to replace the fuse,

only use fuses that are marked BS 1362, and rated at 5A. In the unlikely event that this plug is not suitable for the

sockets in your home, it should be removed and a suitable plug tted as follows:

The wires of the mains lead are coloured in accordance with the following code:

GREEN AND YELLOW – EARTH

BLUE – NEUTRAL

BROWN – LIVE

As these colours may not correspond with the coloured markings sometimes used to identify the

terminals in the plug, connect as follows.

The wire coloured GREEN AND YELLOW must be connected to the terminal marked E or by the

earth symbol or coloured GREEN or GREEN AND YELLOW. The wire coloured BLUE must be

connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must be

connected to the terminal marked L or coloured RED.

If you are in any doubt about how to wire a plug or replace a fuse safely, consult a qualied

electrician.

USAGE

Before sterilisation, wash all bottles and feeding accessories in warm soapy water or in a dishwasher (top rack only) to

remove any milk residues. Separate all components for washing and reassemble teat and screw ring for sterilising.

WARNINGS

MORE THAN 80ML OF WATER IN THE STERILISER BASE WILL PROLONG THE CYCLE TIME. LESS THAN

80ML MAY NOT STERILISE ITEMS PROPERLY. DURING STERILISATION HOT STEAM PASSES THROUGH THE

VENTS AT THE TOP OF THE UNIT. POSITION THIS UNIT AWAY FROM WALLS AND MAKE SURE IT IS NOT

UNDERNEATH ANY OVERHANGING SHELVES OR CABINETS. DO NOT OPEN THE STERILISER UNTIL THE

LIGHT HAS SWITCHED OFF, OR YOU HAVE PRESSED THE STOP BUTTON AND WAITED 5 MINUTES TO ALLOW

FOR COOLING.

1. Place on a at, heat resistant

work surface. Pour exactly 80ml

of water into the steriliser base.

Your Tommee Tippee bottles

have a handy 80ml measure.

4. Place the upper tray onto

the lower tray.

7. Place the lid onto the steriliser

base and plug the lead into the

mains power.

10. The stop button is there in case

you need to manually stop your

steriliser mid cycle. If you do this you

will have to restart the sterilising

process from the beginning as the

contents will not be sterilised.

13. Wash your hands thoroughly

before handling sterilised items.

Take care as the items may be

hot. Remove the sterilised

items. The teat tongs can be

used to remove the small items.

2. Assemble lower tray into the

steriliser base with logo facing

forwards on the right hand side.

5. Place the assembled teat and

screw ring onto the upper tray. It

is important not to have the

hoods tted onto the teat and

screw ring.

8. Press the play button to start

the machine. An amber light will

come on. This shows that the

steriliser is in its warm up phase

and will automatically begin the

sterilising phase when the

appropriate temperature is

reached.

11. After the cycle has nished

allow to cool for at least 5

minutes before opening the

steriliser. We recommend that

you hold the lid by the two side

handles, lift vertically until you

have cleared the upper tray then

tilt the lid to an angle away from

you to allow the water to drain.

14. The trays can be used separately

as a drying rack or sterile surface.

9. The light will automatically switch

off when the sterilising phase

has nished.

12. The contents will remain sterile

for 24 hours if the steriliser

is unopened.

15. To help in the reduction of

limescale, ensure that the unit is

drained and wiped after use once

fully cooled.

3. Place the bottles neck downwards

into the locators of the removable

tray. This includes locators for

advanced anti-colic valves.

6. Slot the hoods into the hood

locators of the removable upper

tray so that they hang over the

teat and screw ring but are not

fully assembled.

4 5 6

987

10 11 12

151413

2 3

Tommee Tippee Electric steam steriliser - 423222 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info