Bedienungsanleitung Tommee Tippee Express and Go - 422147 (Seite 2 von 2) (Englisch)

693120

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

2. USAGE

For your childs safety always check food temperature before feeding by testing on a sensitive part of the skin

To turn on the unit - hold down the

power button for 2 seconds, the

LED will flash red and beep once

to show that the unit is in

standby mode

1 2

Select pouch or bottle type - press

until the green LED is adjacent to

your requirement

Select volume of feed - press until

the green LED is adjacent to your

requirement

Insert feed - we recommend using

the pouch holder to support all milk

storage pouches, Bottles can be

placed directly in to the base of the

unit. For hygiene we recommend

leaving the hood on the teat

Close the lid

Press the power button - LED will

turn solid red and beep once to

show the cycle has started

Select temperature - press until the

green LED is adjacent to your

requirement

When cycle finishes the unit will

beep 3 times and red light will

start to flash. Unit will

automatically turn off when

cycle is complete and reset

Open lid and remove feed taking

care not to touch the water inside

the unit as it will have heated during

the cycle. Empty unit and replace

water after every use to ensure it

holds the correct amount

To cancel a cycle - hold down the

power button and the temperature

selection button for 5 seconds and

unit will reset

1. SETUP

Please refer to instructions leaflet before use and remember to clean and descale your unit regularly

Fill base unit with

250ml/9floz water

If heating a pouch, insert pouch

holder - bottles can be placed

directly in to the base of the unit

Plug unit in to mains power supply

and place the unit on a clean, dry

kitchen work surface

Hold down the power button for

2 seconds to turn on the unit. The

LED will flash red and beep once to

show the the unit is in standby

mode

The unit is now ready to use

RESET

There are two methods of descaling that you can follow for your warmer.

DESCALING

We recommend carrying out the descaling process

approximately every 4-weeks. If you notice limescale earlier

than 4-weeks, descaling may be required sooner. Living in

a hard water area can produce limescale quicker than other

areas. You can find out your water quality via your water

provider.

You may need to repeat either process if you find that

limescale is still present.

Alternatively, you may wish to use a specific descaling

solution suitable for electric warmers if your build up is

significant, you may need to use a stronger solution.

The descaling process will remove deposits of calcium and other

minerals in the system that may affect its performance

Option 2:

1. Empty the electric warmer and wipe down the inside with a clean sponge or

damp cloth.

2. Pour in 250ml of white vinegar.

3. Turn on the warmer and run for a cycle, approximately 5-minutes.

4. Unplug the unit and leave to cool, then pour any remaining liquid down the

sink. Rinse the interior of the warmer well, with cold water and use a clean

or damp cloth to remove any build up that came loose as a result of the

descaling/cleaning process.

5. Plug unit back in and add regular amounts of water you use for normal

warming. Turn on and run for 5 minutes to remove any additional build up.

Upon completion, rinse warmer again and use as directed.

Option 1:

1. Empty the electric warmer and wipe down the inside with a clean sponge or

damp cloth.

2. Pour in 250ml of white vinegar.

3. Leave for at least 30 minutes, or up to 24-hours depending on the extent of

the limescale.

4. Pour any remaining liquid down the sink. Rinse the interior of the warmer

well with cool water and use a clean sponge or damp cloth to remove any

build up that came loose as a result of the descaling/cleaning process.

5. Plug unit back in and add regular amounts of water you use for normal

warming. Turn on and run for 5 minutes to remove any additional build up.

Upon completion, rinse warmer again and use as directed.

CLEANING

After each use, unplug and allow to cool before cleaning.

Pour away any excess water and wipe with a damp cloth

only. Do not clean with abrasive cleaners or allow to come

in to contact with solvents or harsh chemicals, damage

could result.

3. CLEANING & DESCALING

Jackel International Limited trading

as Mayborn Group

Northumberland Business Park West

Cramlington

Northumberland

NE23 7RH, UK

TOMMEE TIPPEE is a registered trademark

of Jackel International Limited.

0422147

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tommee Tippee Express and Go - 422147 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info