Bedienungsanleitung Tommy Teleshopping GymForm Slim fold Treadmill (Seite 8 von 36) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

753380

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

emergency key to the clothing you are wearing.

When the emergency key (2) is attached to the

control panel (1), the screen will light up and

youwillhearvebeeps.

5. Press the button (11) to start the treadmill

belt.Thedevicewillnotstartworkingforthree

seconds, as displayed on the screen. The

device will beep so you can get ready to use it.

Afterthreeseconds,thebeltwillstartmoving,

the device will go into manual mode and the

speed will be displayed on the screen.

The initial speed is 1 km/h.

6.Pressthe↑button(13)toincreasethespeed

byintervalsof0.1km/heachtimeyoupressthe

button. The maximum speed is 6 km/h.

7.Pressthe↓button(12)toreducethespeed.

8. Press the MODE button ( 10) to view the

other function options on the screen. Each

timeyoupressthebutton,adifferentfunction

will be displayed: the SPEED, the TIME, the

distance (DIST), the kilocalories burned (CAL)

and heartbeat (PULSE). When the indicator

displays the SCAN function, the information

(speed, time, distance and calories) will be

displayed on the screen every ve seconds

without the need to press any buttons.

9.Tondoutyourheartrate,selectthePULSE

option on the control panel and place your

handsoneachofthepulsesensors(28)and

press down until the heartbeat is displayed on

the screen.

10. Each function indicator (14) will light up

whenthefunctionisselected.

Note: Each time you use a programme, your

data on distance, time and calories are saved.

To set the panel to zero, press the MODE

button(10)fortwosecondsoncethebelthas

stopped.

11. The treadmill has a manual mode (P0) and

three automatic programmes:

P0 - Manual mode

P1 - Intervals

P2 - Resistance

P3 - Cardio Booster

Tochangeprogrammes,rst set thepanelto

zero. When the panel is set to zero, press the

MODE button (10) after choosing the pulse

function (PULSE) and the panel will ash on

the programme you are working on (P0, P1, P2

oP3).Usethe↓button(12)andthe↑button

(13) to choose the desired programme.

Even if you use the automatic programmes,

the speed can be adjusted by increasing or

reducingittotyourneeds.Whenthespeed

is automatically changed on a programme, it is

increased or reduced proportionately.

In programme P1, the programmed speed can

be increased or reduced by 1.0 km/h.

Thespeedofprogramme2canbereducedto

1.0 km/h, but cannot be increased.

ThespeedofprogrammeP3canbereduced

to 2.0 km/h, but cannot be increased.

Each time the programme speed is changed,

you will hear three warning beeps so you are

ready.

12. When you have chosen the programme

you want to use, you can select the workout

timebeforeyoubegin.GototheTIMEfunction,

which will be set at the default time of 30

minutes. The time can be reduced by pressing

the↓button(12)orincreasedbypressingthe↑

button (13). The times available are 30, 20 and

10 minutes.

13. When the treadmill is operating and the

button (11) is pressed, the treadmill will

slow down and eventually stop. To restart the

treadmill, press the button again and all the

functions will the same as in the previous

workout.

14. Press the MODE button (10) for three

secondstoeraseallthepreviousfunctionsand

start a new workout.

15. Ifyouwanttostopthetreadmillquickly,pull

on the emergency key.

Unfolding the device (see Picture 3)

1. Remove the two handlebar screws (26).

2. Lower the handlebars (6) to the horizontal

position.

3. Hold onto the base (3) with one hand and use

the other to remove the screw on the vertical

bar (5) and unlock the base.

4. Slowly lower the base (3) until it is on the

oor.

5. Firmly tighten the lock screw (7).

Device folding system (see Picture 4)

1. Loosen the lock screw (7).

2. Raise the base to the vertical position and

hold it in place.

3. Attach the base (3) to the vertical bars (17)

using the screw on the vertical bar (5).

4. Remove the two handlebar screws (26).

5. Raise the handlebars (6) to the vertical

position. Replace the two handlebar screws

(26) so they are not lost.

6.When the device is folded, it can be

transported using the wheels (30).

Product Cleaning and Maintenance

• Beforeperformingdailycleaning,makesure

thedeviceisoffbypressingtheON/OFFbutton

andpullingtheplugfromthepowersupply.

• Do not use abrasive products or solvents to

clean the device.

• Removeanydirtfromthedevicewithadamp

cloth.

• Use a dry cloth to clean the plug and control

panel. Do not use a damp cloth.

• Do not use the device in very damp or dusty

placesthatcouldcausethedevicetofail.Set

upthedeviceonaatsurfacetopreventitfrom

fallingandbreakingdown.

• Donotusethedeviceformorethananhour.

Restforanhouraftereachone-hourworkout.

The components should be kept clean. Both

sidesofthebeltshouldbecleanedtoreduce

dirt build-up. Before using the device, make

sure the treadmill surface is clean. Use soap

and a damp cloth to clean the belt. Do not use

solvents.Wipeoffthesweatonthehandlebars

aftereachuse.

Tommy Teleshopping GymForm Slim fold Treadmill Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info