Bedienungsanleitung Tommy Teleshopping VizClear HD Car Visor (Seite 3 von 12) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

703162

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Congratulations on the purchase of your VizClear

HD® Car Visor, the 2-in-1 visor for daytime and

night that enhances colour, clarity and contrast.

It reduces sun glare during the day and impro-

ves night vision because it softens the glare from

street lights and headlights that affect driving.

Please read these instructions and safety war-

nings carefully before using the product for the

rst time.

Keep these instructions in a safe place for future

reference.

SAFETY WARNING

- The VizClear HD® Car Visor does not replace

the original sun visor in your vehicle.

- Ensure the product is properly installed before

starting up the vehicle.

- In some vehicles, the VizClear HD® Car Visor

may limit the movement of your vehicle’s visor.

EASY TO ASSEMBLY:

No tools necessary. Just attach it to the sun visor

in any car.

1. Place the car’s sun visor in the raised position.

2. Hold the VizClear HD® Car Visor with the

open part of the clip facing you (see Image

1).

NB: The lens should be below the clip.

3. Slide the clip of the VizClear HD® Car Visor

over the car’s visor in the area closest to the

vehicle’s windscreen. (See Image 2)

4. Remove the protective lm from both sides of

the VizClear HD® Car Visor.

5. The visors/panels can be adjusted by rotating

the dark visor 180° and the yellow visor 90°

to adapt them to your needs. (See Image 3)

USING THE DAY LENS:

Use the day lens to reduce glare from sunlight.

Fold down the day lens to the lowered position

(see Image 4). The yellow lens for night vision

should be in the raised position when the day

lens is being used.

USING THE NIGHT LENS:

Use the night lens to reduce glare from street

lights.

Fold up the day lens towards the windscreen (see

Image 5).

Fold down the yellow night-vision lens to the

lowered position (see Image 5).

The yellow lens is mainly for night use, but can

also be used during the day.

Observation: Fold up both lenses (towards the

car’s visor) when not in use.

CLEANING AND MAINTENANCE:

• Do not touch the lenses with dirty or greasy

hands. It is easy to leave ngerprints, which

can reduce visibility.

• If your VizClear HD® Car Visor is dirty, clean it

with a microbre cloth or a soft cloth.

• Clean your VizClear HD® Car Visor with mild,

non-corrosive soap. Do not use aggressive

chemical products, solvents or ammonia-

based products (such as window cleaners

or surface cleaners). Acrylic cleaners should

be used by following the product instructions.

The set includes:

• 1 VizClear HD® Car Visor (with 2 lenses: 1

day lens and 1 night lens)

• 1 instruction manual

Quality Warranty

This product is covered by a warranty against

manufacturing defects subject to the time perio-

ds stipulated by the legislation in force in each

country.

This warranty does not cover damages resulting

from inadequate use, negligent commercial use,

abnormal wear and tear, accidents or improper

handling.

Made in China.

Day

Día

Jour

Tag

Daglenzen

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tommy Teleshopping VizClear HD Car Visor Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info