Bedienungsanleitung TomTom Runner and Multi-Sport (Seite 17 von 44) (Englisch)

566340

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Settings for Running activities

Before you start an activity you can choose a training program and also decide what information you

would like to see as you train.

There are a wide range of metrics that you can choose to see while running including calories, heart,

heart rate zone and distance.

Note: To get help on choosing which metrics you want to see during an activity, see Choosing

which metrics to display.

To choose to see just one metric for speed, average speed, pace or average pace, move down to the

Settings menu. Select Metrics, then move right. Select Speed, Avg. Speed, Pace or Avg. Pace.

To choose to see speed, pace or both metrics, move down to the Settings menu. Select Metrics, then

move right. Select Speed, then move right. Select Speed, Pace or Both.

Settings for Cycle activities

Note: Cycle is available on the TomTom Multi-Sport.

You can log your heart rate, speed and location using the integrated sensors when cycling.

If you want to review your performance while cycling, in the interest of your own safety it is best to

mount the GPS watch using the supplied bike mount so that you can keep both hands on the handle

bars.

If you want to review your heart rate while cycling, we recommend connecting an optional external

heart rate sensor so that you can review your heart rate safely.

Setting the wheel size for use with a cadence sensor

If you are using a cadence sensor, you should set the Wheel size setting to increase the accuracy of

the metrics provided by the sensor. This setting is the circumference of your rear tyre in millimetres

(mm).

To set your wheel size, do the following:

1. From the activity start screen, move down to open the Settings menu.

2. Select Wheel size, then move right.

3. Set the size so it's correct for your rear wheel.

To find the circumference of your rear wheel, you can either measure the wheel yourself using a tape

measure, or look up the value in an online calculator. For example, on this site you can find the

circumference using the diameter of the wheel and the thickness of the tyre:

www.bikecalc.com/wheel_size_math

For example, if your wheel size is 700c and the tyres are 25 mm thick, the circumference is 2111 mm.

This is the value you should enter.

Note: To get help on choosing which metrics you want to see during an activity, see Choosing

which metrics to display.

Settings for Swimming activities

Note: TomTom Runner Cardio and TomTom Multi-Sport Cardio are water-resistant. You can swim

with these watches. However, the built-in Heart Rate Monitor does not work under water.

Before you start a swimming activity, you should check two settings:

 The Pool size setting for the pool where you are swimming. This setting is the length of the pool in

metres or yards.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TomTom Runner and Multi-Sport Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TomTom Runner and Multi-Sport

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info