Bedienungsanleitung Tomy TA100 Classic Baby (Seite 2 von 27) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

549754

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

•

Low Battery –

Parent Unit

•

Button will change from green

to ashing red.

Alarm tone on

Parent Unit

Alarm Meaning

Indications on the Parent Unit

Loss of contact.

(Continuous)

1 beep

••••••••

• GETTING TO KNOW YOUR MONITOR

PARENT UNIT

Sound Level Lights Display

Volume Control Wheel

AC/Mains Power Input

On/Off Button

Sound Activation Switch

Channel Selection Switch

ON/OFF Button

Nightlight On/Off Button

BABY UNIT

GB GB

Microphone

Mains Cable Tidy

• SET UP

• POWER ON

For best performance we recommend both units are operated using the mains adaptors supplied. Simply plug each

adaptor into their respective units and then into a convenient mains outlet. Switch on the mains outlet and press the

switch on both units to activate.

Place the Baby Unit at least 1 metre away from your baby ensuring all parts are kept out of reach. Under no

circumstance should you place any parts of the monitor in or on a cot. For best performance we recommend that the

monitor is placed no further away than 3 metres from your baby.

For portable Parent Unit monitoring, remove the battery compartment cover from the back of the unit and insert 3 x

AAA/LR3 batteries (not supplied) ensuring correct polarity. Replace the cover and screw rmly in position.

• SELECTING A CHANNEL

Switch both Parent and Baby Units to channel 1. This need not be changed unless interference occurs. If interference

occurs change the switch on BOTH Parent and Baby Units to channel 2. If further interference occurs refer to the ‘Simple

Solution Guide’ within this booklet.

Important! Even if the two units are on different channels, it may still be possible for the Parent Unit to pick up

signals from the Baby Unit if they are close together, so you may think both units are on the same channel.

Always check to make sure both units are on the same channel.

• COMMUNICATION RANGE

Your monitor has been carefully designed to operate at its best within a 300 metre range suitable for the majority of

household environments. The range and general quality of reception may vary depending on battery power and a

number of obstructions such as walls, buildings etc.

• ALARM MODES

Identify the cause of audible alarm by using the following table; should you be unable to identify or rectify the cause

of the problem, please refer to the Simple Solution Guide within the booklet.

Channel Selection Switch

Base/Belt Clip

AC/Mains Power Input

• FEATURES AND FUNCTIONS

• VOLUME CONTROL

Adjust the volume from mute to max by moving the thumb wheel clockwise to increase or anti-clockwise to decrease.

• SOUND LEVEL LIGHTS DISPLAY

The Sound Level Lights Display on your Parent Unit reacts to the sounds of your baby. The louder your baby, the more

lights illuminate on the display. You can lower the volume of the Parent Unit whilst still watching out for baby, ideal

for when you’re relaxing or entertaining.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tomy TA100 Classic Baby Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info