Bedienungsanleitung Toolson AS1200PRO (Seite 12 von 100) (Alle Sprachen)

782144

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

12 І 100

you at risk of injury.

• Always pull the plug out of the power socket before

adjusting or servicing the machine.

• Give these safety regulations to all persons who work

on the machine.

• Before you use the machine for the rst time, check

that the voltage marked on the rating plate is the same

as your mains voltage.

• If you need to use an extension cable, make sure its

conductor cross-section is big enough for the equip-

ments power consumption. Minimum cross-section:

1.5 mm2.

• If you use a cable reel, the complete cable has to be

pulled off the reel. Check the power cable. Never use

a faulty or damaged power cable.

• Do not use the cable to pull the plug out of the socket.

• Protect the cable from heat, oil and sharp edges.

• Do not leave the machine in the rain and never use it

in damp or wet conditions.

• Provide good lighting.

• Do not saw near ammable liquids or gases.

• Non-slip shoes are recommended when working out-

doors. Wear a hair net if you have long hair.

• Avoid abnormal working postures.

• Operators have to be at least 18 years of age. Trai-

nees of at least 16 years of age are allowed to use the

machine under supervision.

• Keep children away from the machine when it is con-

nected to the power supply.

• Keep your workplace clean of wood scrap and any

unnecessary objects. An untidy work area invites ac-

cidents.

• Do not allow other persons, especially children, to

touch the tool or cable. Keep them out of your work

area.

• Persons working on the machine should not be dis-

tracted.

• Carry out conversions, adjustments, measurements

and cleaning jobs only when the motor is switched off.

- Pull out the power plug!

• Before switching on, make sure that all keys and wren-

ches have been removed from the tool.

• Switch off the motor and pull out the power plug before

you leave the workplace.

• Ret all guards and safety devices immediately after

you have completed any repairs or maintenance work.

• Be sure to observe the safety information and ope-

rating and maintenance instructions issued by the

manufacturer, as well as the dimensions listed in the

Technical Data.

• It is imperative to observe the accident prevention

regulations in force in your area as well as all other

generally recognized rules of safety.

• Note the information published by your professional

associations.

• Do not use any low-powered machines for heavy duty

work.

• Do not mis-use the cable

• Make sure you stand squarely and keep your balance

at all times.

• Check that the moving parts are in good working order,

that they do not jam, and that no parts are damaged.

Make sure that all parts are tted correctly and that all

other operating conditions are properly fullled.

• Unless otherwise stated in the operating instructions,

damaged safety devices and parts have to be repaired

or replaced by an authorized service center.

The manufacturer shall not be liable for any changes

made to the machine nor for any damage resulting

from such changes. Even when the machine is used

as prescribed it is still impossible to eliminate certain

residual risk factors. The following hazards may arise

in connection with the machineʼs design and construc-

tion:

• Hazard due to machine defects: If one or more parts

of the machine are defective, the use of the machine

is prohibited. Defective parts must be replaced im-

mediately. Only replacement parts which have been

approved by the manufacturer may be used. It is

prohibited to make any changes to the machine.

• Hazard due to electric shock: Only operate the ma-

chine at a power source which is protected by a resi-

dual-current circuit breaker with a residual current

of 30 mA! Socket-outlets must be properly installed,

earthed and tested!

• Hazard due to unintentional start-up of the machine:

The power plug must be removed from the socket-

outlet before emptying the sawdust bag and also

when the machine is not in use!

• Hazard due to wood dust: The inhalation of wood

dust is a health hazard! Always wear a protective

dust mask when emptying the debris bag. When dis-

posing of sawdust waste, make sure you do so in an

environmentally-friendly fashion!

• Fire hazard: Never use the machine to extract hot

objects!

• Damage to hearing if ear-muffs are not used as ne-

cessary.

• Harmful emissions of wood dust when used in

closed rooms.

Safety information

m Attention! The following basic safety measures

must be observed when using electric tools for protec-

tion against electric shock, and the risk of injury and

re. Read all these notices before using the electric

tool and keep the safety instructions for later refer-

ence.

Safety information

• Warning: When using electric tools it is imperative to

take the following basic safety precautions in order to

reduce the risk of electric shock, injury and re.

• Take due note of all this information before and while

working with the machine.

• Do not lose these safety regulations.

• Guard against electric shock Avoid body contact with

earthed parts.

• When equipment is not being used it should be kept in

a dry, closed place out of childrens reach.

• Keep mounted attachments sharp and clean to enable

you to work well and safely.

• Check the power cable regularly and have it replaced

by an authorized specialist at the rst sign of any da-

mage.

• Check your extension cables regularly and replace

them if damaged.

• When working outdoors, use only extension cables

that are approved for outdoor use and which are

marked accordingly.

• Concentrate on what you are doing. Use common

sense. Do not operate the tool if your mind is not on

your work.

• Never use an electric tool with a switch that cannot be

turned on and off. Warning! The use of plug-in tools

and accessories other than those intended may put

Toolson AS1200PRO Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info