Bedienungsanleitung Toolson Pro HMD1800PRO (Seite 14 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

781902

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

14 І 108

situations.

Maintenance and Service

• Have your power tool serviced by a qualied repair

workshop using only original replacement parts. This

will ensure that after repairs the safety of the power

tool is maintained.

• Damaged cords must be replaced by our after-sales

service.

• If a power plug is damaged, it must be replaced by

a special spare plug provided by our after-sales ser-

vice. If the supply cord of the tools is damaged, it

must be replaced by a special cord, which is availa-

ble from the manufacturer or its after-sales service.

The replacement of the connecting cord must be

carried out by our after-sales service or by a quali-

ed repair workshop.

Additional safety instructions for elec-

trically operated mixing units

• Use the auxiliary handles that come with the tool.

Losing control over the tool can result in personal

injury.

• Grip the tool by the insulated gripping surfaces when

carrying out any work where the tool may come in

contact with hidden wiring or its own cord. A contact

with a live wire can cause the metal parts of the

tool to become live which poses the risk of electric

shock.

• Always fasten the mixer element properly and secu-

rely on the drive shaft; by all means, remove the ad-

justment tool before operating the power tool.

• Under no circumstances should you mix explosive

or ammable substances.

• When mixing, always wear the appropriate personal

protective equipment such as safety glasses, ear

protection, resistant gloves and a respirator.

• Do not use this tool to prepare food, as it cannot be

cleaned in a way that would comply with relevant hy-

giene regulations.

Assembly (Fig. 2-4)

Chucking the beaters

Risk of injury! Wear protective gloves.

• The beater holders (9/10) and the beaters themsel-

ves are identied by the letters R and L.

• Push the sleeve (11/12) down and connect the

beaters (2/3) to the appropriately identied holders

(9/10).

Make sure that the pin (a) is in the groove (b) on

each beater.

• Release the sleeve. The beater is locked.

m Check the safe seating of the beaters by pulling

on them.

Start-up

Mains connection

• Compare the voltage given on the machine model

plate e.g. 230 V with the mains voltage and connect

the machine to the relevant and properly earthed

plug.

• Connect the machine via a 30 mA fault current safe-

ty switch.

• Do not use any defective connection cables.

• Use connecting or extension cables up to a length

of 1.5 m featuring a core cross section of at least 25

mm².

Main fuse: 10 A

cannot be avoided, use a ground fault circuit inter-

rupter. The use of a ground fault circuit interrupter

reduces the risk of electric shock. Always check

whether the mains voltage complies with the voltage

specied on the nameplate of the power tool.

Personal safety

• Stay alert. Watch what you are doing and use com-

mon sense when operating a power tool. Do not use

the power tool while you are tired or under the inu-

ence of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in

serious personal injury.

• Use personal protective equipment. Always wear sa-

fety glasses. Safety equipment such as a dust mask,

non-skid safety shoes, a hard hat or ear protection

depending on the type and use of the power tool will

reduce personal injuries.

• Prevent unintentional starting. Ensure that the po-

wer tool is switched off before connecting it to the

power supply and/or battery, picking it up or carrying

the tool. Carrying power tools with your nger on

the switch or energizing power tools that have the

switch on invite accidents.

• Remove any adjusting tool or wrench before turning

the power tool on. A wrench or a key which has be-

en left attached to a rotating part may induce per-

sonal injury. Do not overreach. Keep proper footing

and balance at all times. This enables you to better

control the power tool in situations which cannot be

foreseen.

• Dress properly. Do not wear loose clothing or jewel-

lery. Keep your hair, clothing and gloves away from

moving parts. Loose clothes, jewellery or long hair

may get caught in moving parts.

• If dust extraction and collection units are installed,

make sure that these are connected and properly

used. Using such devices reduces hazards associa-

ted with dust.

Power tool use and care

• Do not force the power tool. Use the correct power

tool for your application. With the correct power tool

you will do the job better and safer at the specied

power rate.

• Do not use the power tool if it has a defective switch.

A power tool, which cannot be turned on or off with

the switch, is dangerous and must be repaired.

• Unplug the power cord from the outlet and/or re-

move the battery before making any adjustments to

the tool, changing accessories, or storing the power

tool. Such preventive safety measures prevent star-

ting the tool accidentally.

• Store idle power tools out of children’s reach. Do not

allow persons unfamiliar with the tool or these inst-

ructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

• Keep the power tools in good condition. Check that

moving parts are functioning smoothly and do not

lock, whether parts are broken or for any other con-

dition that may affect the power tool’s operation. If

damaged, have the power tool repaired before use.

Many accidents are associated with poorly maintai-

ned power tools.

• Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are like-

ly to block less and are easier to control.

• Use the power tool, the accessories, bits, etc. in ac-

cordance with these instructions and in the manner

intended for the particular type of equipment. Take

into account the working conditions and the work

to be performed. Using power tools for operations

different from those intended can lead to hazardous

Toolson Pro HMD1800PRO Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info