Bedienungsanleitung Toorx BRX-90 (Seite 11 von 14) (Englisch)

737764

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Computer Operation

B-6 During all training period, you may press ST/STOP to stop monitor counting at anytime.

C. Training in PROGRAM mode - press UP button until PROGRAM shows up on the upper line, press MODE to confirm.

(c1)

(c2

)

(c3

)

(c4)

C-1 The initial set program profile is P1 (c1 & c2). There are 12 training program profiles (P1-P12) available. You may press

UP/DOWN button to select the desired training profile. Press MODE button to confirm.

C-2 You may press ST/STOP button to start training directly(c3), or you may press UP, DOWN buttons to adjust resistance

level (c4). During adjustment, you will see the display changes when you press UP or DOWN button twice.

C-3

After adjustment of the training resistance, you may press ST/STOP to start training or, Optionally, set each function

data

target by following the same procedure as stated in B-2 above. The functions available for preset are: Time, Distance,

Calories, and Pulse in PROGRAM mode.(c5)

(c5)

(c6)

(c7)

C-4 After all settings are done, press ST/STOP button to start training

. You will see each preset function data counts down from

target as soon as training starts.(c6)

C-5

Once each function target data is achieved (counts down to zero), the monitor will stop all functions (P appears on the

left-upper corner) and beep for 8 times to remind you. (c7)

C-6

You may press ST/STOP button to start training again. The function which has achieved to zero will start from previous set

data counting down, and other set function data will keep counting up or down from previous records.

C-7 During all training period, you may press ST/STOP to stop monitor counting at anytime.

D. Training in USER mode -

press UP button until USER shows up on the upper line, press MODE to confirm(d1). In USER mode,

you can set your own desired training program.

(d1)

(d2)

(d3)

(d4)

D-1

There are 16 profile units that you can set the desired resistance level for each unit to create your own training program.

Press UP, DOWN buttons to adjust resistance level of the first

profile unit. During adjustment, you will see the display

changes when you press UP or DOWN buttons twice (d3).

Press MODE button to move to the next profile unit. Then,

use UP, DOWN buttons again to set the desired resistance

(d5)

(d6)

level until you've completed all 16 profile units. You may also adjust resistance during training.

D-2

After completing your own training program setting, you may press ST/STOP to start training or, optionally, set each functi

data target by following the same procedure as stated in B-2 above. The functions available for preset are: Time, Distance,

Calories, and Pulse in USER mode. (d4)

D-3

After all settings are done, press ST/STOP button to start training. You will see each preset function data counts down from

target as soon as training starts. (d5)

D-4 O

nce each function target data is achieved (counts down to zero), the monitor will stop all functions (P appears on the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toorx BRX-90 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toorx BRX-90

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info