Bedienungsanleitung Toorx Power Mag (Seite 6 von 7) (Englisch)

737787

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

EXERCISE COMPUTER INSTRUCTION MANUAL

■ FUNCTIONAL BUTTONS:

1.MODE

① Select the window to be set.

② Reset: hold for 3 seconds to reset all data.

2.UP/RECOVERY

① Increase the blinking number, hold for quick increase.

② Press it to enter/exit pulse recovery function when heat rate display

(IF HAVE PULSE FUNCTION)

3.DOWN

Decrease the blinking number , hold for quick decrease

4.RESET

①

During SET

, reset the value of the relevant display window.

②

Hold for 3 seconds to reset all data .

■ FUNCTION

② Exercise time can be set, MAX 99 minutes, each press add or

minus 1 minute, countdown to zero, the

TIME will ﬂash and beep for 10

seconds.

① Count the cumulative distance from the exercise start to the end, KM means metric, MI means imperial.

② Exercise distance can be set, MAX 99 KM/MI, each press add

minus 0.1, countdownto zero, the DIST

will ﬂash and beep for

10 seconds.

② The calorie value can be set, MAX 999, each press add or minus

1, countdown to zero, the CAL will ﬂash and beep for 10 seconds.

SPEED : Window A

displays

The current exercise speed during exercise.

2.TIME:

Window B displays

① Count the cumulative time from the exercise start to the end, and it will

automatically stop timing if without exercise signal over 6 seconds.

3.DISTANCE: Window C displays

4.CALORIES: WindowD displays

① Count the cumulative calories consumed from exercise start to the end.

5.PULSE: Window E displays (IF HAVE)

① Show your current heart rate during exercise, pulse range: 40～240BPM

② The traget pulse value can be set ,range 40-240 BPM .each press add or

minus 1.Beep one time every 10 seconds when the

alue over the target heart rate

6.AUTO OFF

Without any exercise signal or operation over 4 minutes, the computer will turn off automatically and memorize the current data.

■ INSTALLATION

1.Take off the computer back’s battery cover, put 2pcs 1.5V AAA battery inside correctly

Fix the computer on the front place of exercise machine by screw.

Install the magnet and speed sensor on the related place of the exercise machine. Make sure the distance less than 10mm between the

magnet and sensor

Connect the speed signal cable plug and the computer back’s signal plug. If with the

hand pulse, connect the hand pulse cable plug

and the computer back’s pulse signal plug.

5.Start exercise, and if the speed value changes, means the installation is correct. Or else check the installation of magnet and sensor

and also the plug connections between sensor and computer

■ OPERATION

1.RESET

In any displays, hold MODE or RESET button for 3 seconds to reset all the data.

2.SET THE TARGET PARAMETERS

When stop exercise , press MODE to choose the window to be set or reset, the corresponding window’s digit ﬂash, press RESET

clear the value, and press UP or DOWN to set the ﬂashing window’s value. Hold the button to quick increase

decrease.

Set the value as:TIME→DIST→CAL→PULSE.

3.PULSE RECOVER

Y (IF HAVE)

Wear the transmitter belt properly, or hold the hand pulse place, the computer will display your current heart rate.

When the pulse window has the display, stop exercise, press RECOVERY to enter the function of pulse recovery

. The display will show 1

minute countdown as well as your pulse rate, test your pulse until it counts down to zero. Then it will pop up your pulse recovery level

from F1 to F6, that is, from the fastest recovery to the slowest. The fastest recovery F1 shows the best, F6 means the slowest.

Press RECOVER

Y again to exit the pulse recovery function.

■ REPLACE BATTERY

When the display color fades, or with ﬂash when operate buttons, means the battery has no enough power. Take off the battery cover

and use 2pcs new 1.5V

AAA UM-4 battery to replace the old battery.

DO WN

DOWN

UP/

TENSION

TIME

/500M

BMI

PULSE

SPEED

RPM

STOP

DIS.

BMR

RPM

CAL.

TEMP.

WATT

COUNT

KMPH

RE SE

MO DE

TENSION

TIME

/500M

BMI

PULSE

SPEED

RPM

STOP

DIS.

BMR

RPM

CAL.

TEMP.

WATT

COUNT

KMPH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toorx Power Mag Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toorx Power Mag

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info