Bedienungsanleitung Toorx Rower Active Pro (Seite 12 von 18) (Englisch)

737792

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

C. FUNCTIONS:

PROGRAM:

Selection of workout mode.

There are total 19 programs P01-P15 ,U1-U4.

TIME:

Exercise time will be shown on the display when exercising. If there is no signal is detected within

256 seconds, enter SLEEP MODE. Work the computer up by pressing any key or signal input or

start work out, all values will reset zero.

Count up: Without setting the time value, the monitor will count up the time from 0:00 to 99:59.

Count down: Setting the exercise time, the monitor will count down from your setting values.

Once reach setting value, monitor will produce BEEP sounds and then stop, press START/STOP

key to count up form 0:00

DISTANCE

The distance will be displayed on the window. The monitor begins to calculate from 1 meter to

999meter and the measure unit is 1 meter. After reach 1 KM, the measure unit become to 0.1

KM (100meter). The monitor will display from 1.000KM to 9.999KM.

Count up: Without setting the distance value, the monitor will count up from 1M-9.999 KM .

Count down: Setting the exercise distance, the monitor will count down from your setting values.

Once reach setting value, monitor will produce beep sounds and then stop, press START/STOP

key to count up form 1 meter

CALORIE

The calories burned will be displayed on the window. Its scope is 0.0-999kcal.

Count up: Without setting the calorie value, the monitor will count up the count from 0.0 to 999.

Count down: Setting the calorie consumption, the monitor will count down from your setting

values. Once reach setting value, monitor will produce beep sounds and then stop, press

START/STOP key to count up form 0.0.

Count:

Count will be shown on the display when exercising. If there is no signal is detected within256

seconds, it will reset zero.

Count up: Without setting the count value, the monitor will count up the count from 0 to 9999.

Count down: Setting the exercise time, the monitor will count down from your setting values.

Once reach setting value, monitor will produce beep sounds and then stop, press START/STOP

key to count up form 0.

WATT

The value of current watt during work out, which will change when the resistance or speed

changes.

STROKES/MIN

It means the movement times of the rower per minute.

D. OPERATION ORDER:

There are total 20 programs and USER can set work out time and then the program divides this

work time into 10 parts ,

If user do not set work time, the program will count up per second, and every parts

count 1 minutes.

Manual program

Preset Program: Program 01- Program 14

1. Press the PROGRAM button to the desired program

2. Press FUN/SCAN button to enter the program.

3. The Time display will flash, and then press the “ up or down” button to set up the desired

time to do the exercise. Press FUN/SCAN button to confirm your setting value

4. The count display will flash, and then press the “ up or down” button to set up the desired

value. Press FUN/SCAN button to confirm your setting value.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toorx Rower Active Pro Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toorx Rower Active Pro

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info